Cranked‐Chord HSS Connections
Publication: Journal of Structural Engineering
Volume 117, Issue 8
Abstract
In the recent design of a major tubular roof structure involving parabolic hollow structural section (HSS) arches, a cranked‐chord K‐type connection near the support points was identified for further evaluation by laboratory testing. A stiffened form of the connection was tested in triplicate and deemed to satisfy the design criteria. Subsequently, a study was initiated to establish an appropriate design method for such connections, without stiffeners. Fourteen specimens have been tested, involving ten cranked‐chord K‐connections and four similarly sized T‐connections as control specimens, with the aim of establishing whether these cranked‐chord connections behave as conventional K‐connections or as T‐connections, or a combination of both. It is shown that cranked‐chord connections can be designed as overlapped K‐ (or N‐) connections using the current International Institute of Welding (IIW) recommendations, subject to their parameter limits of validity. An argument is also made for a slight relaxation of these limits of validity.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Allen, C. M., and Duchesne, D. P. (1989). “Toronto SkyDome retractable roof stadium, the roof concept and design.” ASCE 7th Structures and Pacific Rim Engineering Congress, ASCE, New York, N.Y.
2.
Allen, C. M., and Packer, J. A. (1989). “Structural testing of RHS joints and members for the Toronto SkyDome roof.” Proc. International Symposium on Tubular Structures, Elsevier Applied Science Publishers, London, England, 418–425.
3.
Allen, C. M., Duchesne, D., and Humar, J. (1988). “Application of computer‐aided design in the Ontario Domed Stadium project.” Can. J. Civ. Engrg., 15(1), 14–23.
4.
Caravaggio, A. G. (1988). “Tests on steel roof joints for Toronto SkyDome,” thesis presented to the University of Toronto, at Toronto, Ontario, Canada, in partial fulfillment of the requirements for the degree of Master of Applied Science.
5.
“Design recommendations for hollow section joints‐predominantly statically loaded.” (1989). IIW Doc. XV‐701‐89, 2nd Ed., Int. Inst. of Welding (IIW), Subcommission XV‐E, London, England.
6.
“General requirements for rolled or welded structural quality steel.” (1981). CAN3‐G40.20‐M81, Canadian Standards Association (CSA), Rexdale, Ontario, Canada.
7.
Giddings, T. W., and Wardenier, J., eds. (1986). “The strength and behaviour of statically loaded welded connections in structural hollow sections.” CIDECT Monograph No. 6, British Steel Corp., Tubes Div., Corby, England.
8.
Marshall, P. W., Packer, J. A., and Sherman, D. R. (1989). “Proposed revision to tubular connection design rules.” Report of AWS Dl.l Subcommittee 6 on Tubular Structures, American Welding Society, Miami, Fla.
9.
Packer, J. A., and Davies, G. (1989). “On the use and calibration of design standards for SHS joints.” Struct. Engr., 67(21), 377–386.
10.
Pappas, L. (1989). “Cranked‐chord HSS joints,” thesis presented to the University of Toronto, at Toronto, Ontario, Canada, in partial fulfillment of the requirements for the degree of Master of Applied Science.
11.
Wardenier, J. (1982). Hollow section joints. Delft University Press, Delft, Netherlands.
Information & Authors
Information
Published In
Copyright
Copyright © 1991 ASCE.
History
Published online: Aug 1, 1991
Published in print: Aug 1991
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.