Stay‐Cable Fatigue Behavior
Publication: Journal of Structural Engineering
Volume 117, Issue 3
Abstract
Monte Carlo simulation is used to investigate the relationship between the fatigue lives of short‐prestressing strand test specimens and strand stay cables. Cable lives are calculated using statistics determined from the results of fatigue tests of prestressing strand specimens. The cable modeling accounts for the effects of cable length and the number of cable strands on the fatigue life. Three different probability distributions are used to characterize the scatter in the fatigue lives of strand test specimens. Comparisons are made between cable lives calculated using each of the distributions. The predicted cable life is found to be sensitive to the distribution that is used. The distributions produce similar conclusions concerning the relationship between cable length, number of strands, and cable‐fatigue life with the short test specimen behavior.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Andra, W., and Saul, R. (1979). “Die Festigkeit, insbesondere Dauerfestigkeit langer Paralleldrahtbundel.” Die Bautechnik, 56(4), 128–130.
2.
Ang, A. H.‐S., and Tang, W. H. (1984). Probability concepts in engineering planning and design, Vol. II, John Wiley & Sons, New York, N.Y.
3.
Basu, S., and Chi, M. (1982). “Analytical study for fatigue of bridge cables.” Proc. of Colloq. on Fatigue of Steel and Concrete Structures, International Association of Bridge and Structural Engineers, Lausanne, Switzerland, 647–653.
4.
Box, G. E. P., and Muller, M. E. (1958). “A note on the generation of random normal deviates.” Annals Math. Stat., 29, 610–611.
5.
Castillo, E., Fernandez Canteli, A., Esslinger, V., and Thürlimann, B. (1985). “Statistical model for fatigue analysis of wires, strands and cables.” Proc., International Association of Bridge and Structural Engineers, Zurich, Switzerland, 82–85, Feb.
6.
Coleman, B. D. (1958). “Statistics and time dependence of mechanical breakdown in fibers.” J. Appl. Phys., 29(6), 968–983.
7.
Freudenthal, A. M. (1961). “Safety, reliability and structural design.” J. Struct. Div., ASCE, 87(3), 1–16.
8.
Kelly, A., and McCartney, L. N. (1981). “Failure by stress corrosion of bundles of fibers.” Proc. of the Royal Society of London, London, U.K., A374, 475–489.
9.
Makino, F., Komatsu, S., Tanaka, Y., and Haraguchi, T. (1986). “The fatigue strength of long and large parallel wire cables.” Proc. of the Japanesee Society of Civil Engineers, 10(374/I‐6), 477–486.
10.
Phoenix, S. L. (1978). “Stochastic strength and fatigue of fiber bundles.” Int. J. Fract., 14(3), 327–343.
11.
Recommendations for stay cable design and testing. (1986). Ad Hoc Committee on Cable‐Stayed Bridges, Post‐Tensioning Institute, Phoenix, Ariz.
12.
Stallings, J. M. (1988). “Probabilistic Evaluations of Stay Cable Fatigue Behavior,” thesis presented to the University of Texas, at Austin, Texas, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
13.
Standard specifications for highway bridges. (1983). 13 Ed., American Association of State Highway and Transportation Officials, Washington, D.C.
14.
Warner, R. F., and Hulsbos, C. L. (1966). “Fatigue properties of prestressing strand.” Prestressed Concr. Inst. J., 11(1), 32–52.
Information & Authors
Information
Published In
Copyright
Copyright © 1991 ASCE.
History
Published online: Mar 1, 1991
Published in print: Mar 1991
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.