Review of Effects of Loading Rate on Concrete in Compression
Publication: Journal of Structural Engineering
Volume 117, Issue 12
Abstract
A survey of the behavior of concrete subjected to dynamic loading is presented. Since the mechanical properties of materials are functions of the rate of loading, they need to be determined with respect to straining rate in order to accurately predict the behavior of a reinforced concrete structure subjected to dynamic loads. Provisions for seismic design in current design codes are developed on the basis of results obtained from quasi‐static tests mainly because the test results available are insufficient and inconclusive. The response of concrete to high straining rates is reviewed and discussed. The strain‐rate effect is inversely proportional to the strength of concrete. As rate of loading increases, compressive strength, modulus of elasticity, and the slope of the descending portion of the stress‐strain curve of concrete increase.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Abrams, D. A. (1917). “The effect of rate of application of load on the compressive strength of concrete.” Proc. ASTM, American Society of Testing Materials, 17, 364–365.
2.
Atchley, B. L., and Furr, H. L. (1967). “Strength and energy absorption capabilities of plain concrete under dynamic and static loadings.” ACI J., 64, 745–756.
3.
Bertero, V. V. (1972). “Experimental studies concerning reinforced, prestressed and partially prestressed concrete structures and their elements.” Symp. on Resistance and Ultimate Deformability of Structures Acted on by Well Defined Repeated Loads, International Association of Bridge and Structural Engineering, 67–99.
4.
Bertero, V. V., Rea, D., Mahin, S., and Atalay, M. B. (1973). “Rate of loading effects on uncracked and repaired reinforced concrete members.” Proc., Fifth World Conference on Earthquake and Engrg., Rome, 1, 1461–1470.
5.
Bresler, B., and Bertero, V. V. (1975). “Influence of high strain rate and cyclic loading on behavior of unconfined and confined concrete in compression.” Proc. Second Canadian Conference on Earthquake Engrg., 5, 1–13.
6.
Cowell, W. L. (1966). “Dynamic properties of plain portland cement concrete.” Technical Report No. R447, U.S. Naval Civ. Engrg. Lab., Port Hueneme, Calif.
7.
Dhir, R. K., and Sangha, C. M. (1972). “A study of relationships between time, strength, deformation and fracture of plain concrete.” Magazine of Concrete Res., 24(81), 197–208.
8.
Dilger, W. H., Koch, R., and Kowalczyk, R. (1984). “Ductility of plain and confined concrete under different strain rates.” ACI J., 81(1), 73–81.
9.
Evans, R. H. (1942). “Effect of rate of loading on the mechanical properties of some materials.” J. of Inst. of Civ. Engrs., 18(7–8), 296–306.
10.
Evans, R. H. (1958). “Effect of rate of loading on some mechanical properties of concrete.” Proc. of Conference on Mechanical Properties of Non‐metallic Brittle Materials, London, 175–192.
11.
Glanville, W. H. (1938). “An investigation of the stress in reinforced concrete piles during driving.” Building Research Technical Paper 20, H.M.S.O., London, England.
12.
Green, H. (1964). “Impact strength of concrete.” J. of Inst. of Civ. Engrs., 28, 383–396.
13.
Hughes, B. P., and Gregory, R. (1972). “Concrete subject to high rates of loading in compression.” Magazine of Concrete Res., 24(78), 25–36.
14.
Jones, P. G., and Richart, F. E. (1936). “The effect of testing speed on strength and elastic properties of concrete.” Proc. ASTM, American Society for Testing Materials, 36, 380–391.
15.
Kaplan, S. A. (1980). “Factors affecting the relationship between rate of loading and measured compressive strength of concrete.” Magazine of Concrete Res., 32(111), 79–88.
16.
Kent, D. C., and Park, R. (1971). “Flexural members with confined concrete.” J. Struct. Engrg., ASCE, 97(7), 1969–1990.
17.
Mainstone, R. J. (1975). “Properties of materials at high rates of loading.” Materials and Structures: Research and Testing (Paris), 8(44), 102–116.
18.
Mander, J. B., Priestley, M. J. N., and Park, R. (1988). “Theoretical stress‐strain model of confined concrete.” J. Struct. Engrg., ASCE, 114(8), 1804–1826.
19.
Mlakar, P. F., Vitaya‐Udom, K. P., and Cole, R. A. (1985). “Dynamic tensile‐compressive behavior of concrete.” ACI J., 82(4), 484–491.
20.
Norris, G. H., Hansen, R. J., Holley, M. J., Biggs, J. M., Namyet, S., and Minami, J. K. (1959). Structural design for dynamic loads. McGraw‐Hill Book Co., Inc., New York, N.Y.
21.
Popovics, S. (1973). “A numerical approach to the complete stress‐strain curves for concrete.” Cement and Concrete Res., 3(5), 583–599.
22.
Rüsch, H. (1960). “Researchers toward a general flexural theory for structural concrete.” ACI J., 57(1), 1–28.
23.
Sargin, M., Ghosh, S. K., and Handa, V. K. (1971). “Effects of lateral reinforcement upon the strength and deformation properties of concrete.” Magazine of Concrete Res., 23(75/76), 99–118.
24.
Scott, B. D., Park, R., and Priestley, M. J. N. (1982). “Stress‐strain behavior of concrete confined by overlapping hoops at low and high strain rates.” ACI J., 79(1), 13–27.
25.
Soroushian, P., Choi, K., and Alhamad, A. (1986). “Dynamic constitutive behavior of concrete.” ACI J., 83(2), 251–258.
26.
Sozen, M. A. (1974). “Hysteresis in structural elements.” Presented at the Winter Annual Meeting of the American Soc. of Mech. Engrs., American Society of Mechanical Engineers, 63–98.
27.
Sparks, P. R., and Menzies, J. B. (1973). “The effect of rate of loading upon the static and fatigue strengths of plain concrete in compression.” Magazine of Concrete Res., 25(83), 73–80.
28.
Spooner, D. C. (1971). “Stress‐strain‐time relationships for concrete.” Magazine of Concrete Res., 23(75/76), 127–131.
29.
Suarls, M., and Shah, S. D. (1983). “Properties of concrete subjected to impact.” J. Struct. Engrg., ASCE, 109(7), 1727–1741.
30.
Tadros, G. S. (1970). “Plastic rotation of reinforced concrete members subjected to bending, axial load and shear,” thesis, presented to University of Calgary, at Alberta, Canada, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
31.
Takeda, J., and Tachikawa, H. (1971). “Deformation and fracture of concrete subjected to dynamic load.” Proc. of the Int. Conference on Mech. Behavior of Materials, Concrete and Cement Paste, Glass and Ceramics, 4, 267–277.
32.
Wakabayashi, M., et al., (1980). “Dynamic loading effects on the structural performance of concrete and steel materials and beams.” Proc. Seventh World Conference on Earthquake Engrg., Istanbul, Turkey, 6(3), 271–278.
33.
Watstein, D. (1953). “Effect of straining rate on the compressive strength and elastic properties of concrete.” ACI J., 49(8), 729–744.
Information & Authors
Information
Published In
Copyright
Copyright © 1991 ASCE.
History
Published online: Dec 1, 1991
Published in print: Dec 1991
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.