Simplified Nonorthogonal Crack Model for Concrete
Publication: Journal of Structural Engineering
Volume 117, Issue 1
Abstract
A new material model that accounts for fracture of concrete is presented. The model is based on the crack‐band concept, providing a formulation suitable for application in the analysis of reinforced concrete structures. The material model features simplified representations of both nonorthogonal cracking and the influence of this cracking on local material stiffnesses. At an integration point, only one primary crack of fixed direction and one rotating crack are allowed to develop. Although the cracks are nonorthogonal to a varying degree during loading, their effect is assessed approximately on softening moduli in orthogonal directions and thus coupling effects are accounted for simply. Numerical examples show the satisfactory performance of this pseudo‐nonorthogonal fracture model.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Barzegar, F., and Schnobrich, W. C. (1987). “Skew anisotropic reinforcement in 2‐D reinforced concrete elements.” Proc. of the Second Int. Conf. on Constitutive Laws for Engineering Materials: Theory and Applications, C. S. Desai, et al., eds., Tucson, Ariz., 813–820.
2.
Bédard, C., and Kotsovos, M. D. (1985). “Application of NLFEA to concrete structures.” J. Struct. Engrg., ASCE, 111(12), 2691–2707.
3.
Buyukozturk, O., Connor, J. J., and Leombruni, P. (1980). “Research on modelling shear transfer in reinforced concrete nuclear structures.” Nucl. Engrg. Des., 59, 67–83.
4.
Cope, R. J., Rao, P. V., Clark, L. A., and Norris, P. (1980). “Modelling of reinforced concrete behaviour for finite element analysis of bridge slabs.” Numerical methods for non‐linear problems, Vol. 1, Pineridge Press, Swansea, U.K., 457–470.
5.
de Borst, R., Kusters, G. M. A., Nauta, P., and Witte, F. C. (1983). “DIANA—A comprehensive, but flexible finite element system.” Finite element systems: a handbook, Third Ed., C. A. Brebbia, ed., Springer Verlag, Berlin, West Germany, 299–311.
6.
de Borst, R., and Nauta, P. (1985). “Non‐orthogonal cracks in a smeared finite element model.” Engrg. Comput., 2(1), 35–46.
7.
Divakar, M. P., Fafitis, A., and Shah, S. P. (1987). “Constitutive model for shear transfer in cracked concrete.” J. Struct. Engrg., ASCE, 113(5), 1046–1061.
8.
Gajer, G., and Dux, P. F. (1989). “Strain softening analysis of concrete structures.” Comput. Struct., 33(2), 575–582.
9.
Gajer, G., and Dux, P. F. (1990). “A crack band based model for FEM analysis of concrete structures.” J. Struct. Engrg., ASCE, 116(6), 1696–1714.
10.
Gupta, A. K., and Akbar, H. (1984). “Cracking in reinforced concrete analysis.” J. Struct. Engrg., 110(8), 1735–1746.
11.
Kong, F. K., Sharp, G. R., Appleton, S. C., Beaumont, C. J., and Kubik, L. A. (1978). “Structural idealization for deep beams with web openings: Further evidence.” Mag. Concr. Res., 30(103), 89–95.
12.
Milford, R. V., and Schnobrich, W. C. (1984). “Numerical model for cracked reinforced concrete.” Proc. of the Int. Conf. on Computer Aided Analysis and Design of Concrete Structures, F. Damjanic, et al., eds., Pineridge Press, Swansea, U.K., 71–84.
13.
Õnate, E., Oliver, J., and Bugeda, G. (1985). “Finite element analysis of the nonlinear response of concrete dams subjected to internal loads.” Finite element methods for nonlinear problems, Proc. of the Europe‐U.S. Symposium, P. G. Bergan, K.‐J. Bathe, and W. Wunderlich, eds., Norwegian Inst. of Tech., Trondheim, Norway, 653–671.
14.
Peter, J. (1964). “Zur Bewehrung von Scheiben und Schalen fur Hauptspannungen Schiefwinklig zur Bewehrungsrichtung,” thesis presented to the University of Stuttgart, at Stuttgart, Germany, in partial fulfillment of the requirements for the degree of Doctor of Engineering.
15.
Petersson, P. E. (1981). “Crack growth and development of fracture zones in plain concrete and similar materials.” Report TVBM‐1006, Div. of Building Materials, Univ. of Lund, Lund, Sweden.
16.
Rots, J. G., Nauta, P., Kusters, G. M. A., and Blaauvendraad, J. (1985). “Smeared crack approach and fracture localization in concrete.” Heron, 30(1), 1–48.
17.
Vecchio, F., and Collins, M. P. (1982). “The response of reinforced concrete to inplane shear and normal stresses.” Publ. No. 82‐03, Dept. of Civ. Engrg., Univ. of Toronto, Toronto, Canada, 1–323.
18.
Yoder, P. J., and Iwan, W. D. (1981). “On the formulation of strain‐space plasticity with multiple loading surfaces.” J. Appl. Mech., 48(4), 773–778.
Information & Authors
Information
Published In
Copyright
Copyright © 1991 ASCE.
History
Published online: Jan 1, 1991
Published in print: Jan 1991
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.