Failure Strengths of Laminated Glass
Publication: Journal of Structural Engineering
Volume 116, Issue 4
Abstract
Laminated glass used in architectural glazing comprises two layers of glass connected by a thin interlayer of polyvinyl butyral. Previously reported nondestructive experimental stress analyses offer evidence that laminated glass behaves like monolithic glass of the same nominal thickness except when temperatures are high. This evidence has been augmented to include failure behavior by destructive tests of a large number of laminated‐glass specimens. Test results reveal that failure strengths of annealed laminated‐glass specimens are equal to failure strengths of annealed monolithic glass specimens of the same nominal thickness at room temperature, and decrease to about 75% of monolithic‐glass strength at 170° F (77° C). Further, heat strengthened and fully tempered laminated‐glass specimens exhibit failure strengths that are approximately three and five times, respectively, the strengths of annealed monolithic‐glass specimens of the same nominal thickness, suggesting monolithic behavior of these types of laminated glass, as well.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Basic/national building code. (1984). 9th Ed., Building Officials and Code Administrators Int., Inc. (BOCA), Homewood, Ill.
2.
Behr, R. A., et al. (1985). “Laminated glass units under uniform lateral pressure.” J. Struct. Engrg., ASCE, 111(5), 1037–1050.
3.
Behr, R. A., Minor, J. E., and Linden, M. P. (1986). “Load duration and interlayer thickness effects on laminated glass.” J. Struct. Engrg., ASCE, 112(6), 1441–1453.
4.
Kanabolo, D. C., and Norville, H. S. (1985). “The strength of new window glass plates using surface characteristics.” NTIS Accession No. PB86‐140100, Glass Res. and Testing Lab., Texas Tech Univ., Lubbock, Tex., Jul.
5.
Linden, M. P., Minor, J. E., and Vallabhan, C. V. G. (1984). “Evaluation of laterally loaded laminated glass units by theory and experiment, supplemental report No. 1.” NTIS Accession No. PB85‐111532, Glass Res. and Testing Lab., Texas Tech Univ., Lubbock, Tex., Jul.
6.
Reznik, P. L., and Minor, J. E. (1986). “Failure strengths of laminated glass units.” NTIS Accession No. PB87‐118873, Glass Res. and Testing Lab., Texas Tech Univ., Lubbock, Tex., Oct.
7.
SMD, stress measuring device, (n.d.). Gaertner Scientific, Chicago, Ill.
8.
“Specification for heat‐treated flat glass‐kind‐HS, kind‐FT, coated and uncoated glass.” (1985). Annual book of ASTM standards, ASTM, Philadelphia, Pa., Vol. 15.02, Standard C1048‐85, Apr.
9.
Standard building code. (1986). Southern Building Code Congress Int. (SBCCI), Birmingham, Ala.
10.
“Standard test method for structural performance of glass in windows, curtain walls, and doors under the influence of uniform static loads by nondestructive method.” (1984). Annual book of ASTM standards, ASTM, Philadelphia, Pa., Vol. 04.07, Standard E998‐84, Nov.
11.
Uniform building code. (1985). Int. Conf. of Building Officials (ICBO), Whittier, Calif.
12.
Vallabhan, C. V. G., Minor, J. E., and Nagalla, S. R. (1987). “Stresses in layered glass units and monolithic glass plates.” J. Struct. Engrg., ASCE, 113(1), 36–43.
Information & Authors
Information
Published In
Copyright
Copyright © 1990 ASCE.
History
Published online: Apr 1, 1990
Published in print: Apr 1990
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.