Classification System for Beam‐to‐Column Connections
Publication: Journal of Structural Engineering
Volume 116, Issue 11
Abstract
The actual response characteristics of a frame and its connections are nonlinear, and current studies of analysis and design methods aim to incorporate such semirigid concepts into the models. Elements of this approach are incorporated in earlier steel design specifications, through Type 3 connections, and codes in several areas of the world now reflect further refinements of this philosophy. With the large variety of connection types that are used in practice, it is infeasible to utilize the properties of individual connections. The paper develops a scheme whereby connections can be classified in terms of strength, stiffness, and ductility, using tests and theoretical data. Some special cases are also considered, such as connections with softening‐stiffening characteristics, connections with low ductility, and connections with properties that vary as a function of the applied load sense. The classification system is arranged such that new connection types can easily fit into the current data base.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ackroyd, M. H. (1987). “Simplified frame design of type PR construction.” AISC Engrg. J., 24(4), 141–146.
2.
Bijlaard, F. S. K., and Zoetemeijer, P. (1986). “Influence of joint characteristics on the structural performance of frames.” Steel structures: Recent research advances and their application to design. M. N. Pavlovic, ed., Elsevier Applied Science Publishers, Ltd., London, U.K., 109–134.
3.
Bjorhovde, R. (1984). “Effect of end restraint on column strength—Practical applications.” AISC Engrg. J., 20(1), 1–13.
4.
Bjorhovde, R. (1988). “Limit states considerations for gusset plates.” J. Constr. Steel Res., 9(1), 61–73.
5.
Bjorhovde, R., and Brozzetti, J. (1988). “Data sheet format presentation.” Connections in steel structures: Behaviour, strength and design, Elsevier Applied Science Publishers, London, U.K., 380–387.
6.
Bjorhovde, R., Brozzetti, J., and Colson, A. (1988). Connections in steel structures: Behaviour, strength and design, Elsevier Applied Science Publishers, London, England.
7.
Colson, A., and Penserini, P. (1988). “Three‐dimensional physical and mathematical modeling of column footing connections.” Proc., SSRC Annual Tech. Meeting, Minneapolis, Minn., 301–308.
8.
Davison, J. B., Kirby, P. A., and Nethercot, D. A. (1988). “Semi‐rigid connections in isolation and in frames.” Connections in steel structures: Behaviour, strength and design, Elsevier Applied Science Publishers, London, U.K., 195–202.
9.
Eurocode 3; Limit states design of steel structures. (1986). European Community (EC), Brussels, Belgium.
10.
Hardash, S. G., and Bjorhovde, R. (1985). “New design criteria for gusset plates in tension.” AISC Engrg. J., 22(2), 77–94.
11.
Kishi, N., and Chen, W.‐F. (1986). “Data base for beam‐to‐column connections.” I and II, Purdue Univ., West Lafayette, Ind.
12.
Kishi, N., et al. (1988a). “Moment‐rotation relation of top‐ and seat angle with double web angle connections.” Connections in steel structures: Behaviour, strength and design, Elsevier Applied Science Publishers, London, U.K., 121–134.
13.
Kishi, N., et al. (1988b). “Moment‐rotation relation of single/double web angle connections.” Connections in steel structures: Behaviour, strength and design, Elsevier Applied Science Publishers, London, U.K., 135–149.
14.
Lindsey, S. D. (1988). “Practical considerations in the design of frames with PR connections.” Connections in steel structures: Behaviour, strength and design, Elsevier Applied Science Publishers, London, U.K., 339–343.
15.
Penserini, P. (1989). “Modelisation du comportement des liaisons structures‐fondations,” These d'Universite, Ecole Normale Superieure de Cachan, Universite Paris VI, Paris, France (in French).
16.
Picard, A., and Beaulieu, D. (1988). “Column base plate connections.” Connections in steel structures: Behaviour, strength and design, Elsevier Applied Science Publishers, London, U.K., 252–262.
17.
Specification for the load and resistance factor design of steel structures for buildings. (1986). Am. Inst. of Steel Construction (AISC), Chicago, III.
18.
Specification for the design, fabrication and erection of steel structures for buildings. (1989). Am. Inst. of Steel Construction (AISC), Chicago, III.
19.
Stark, J. W. B., and Bijlaard, F. S. K. (1988). “Structural properties of connections in steel frames.” Connections in steel structures: Behaviour, strength, and design, Elsevier Applied Science Publishers, London, U.K., 186–194.
20.
Yee, Y. L., and Melchers, R. E. (1986). “Moment‐rotation curves for bolted connections.” J. Struct. Engrg., ASCE, 112(3), 615–635.
Information & Authors
Information
Published In
Copyright
Copyright © 1990 ASCE.
History
Published online: Nov 1, 1990
Published in print: Nov 1990
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.