Steel Bracing of RC Frames for Seismic Retrofitting
Publication: Journal of Structural Engineering
Volume 116, Issue 1
Abstract
The use of steel bracing systems for retrofitting seismically inadequate reinforced concrete frames is examined. Diagonal bracing provides an excellent approach for strengthening and stiffening existing buildings for lateral forces. A variety of retrofitting objectives, ranging from drift control to collapse prevention, can be achieved. The designer can determine the force path in the retrofitted structure and adjust the strength and stiffness as needed. An analytical study is performed to gain understanding into the behavior of a braced frame under cyclic lateral loading, particularly frames with weak short columns. Inelastic buckling of the braces influences detrimentally the inelastic cyclic behavior of a braced frame. Instability can be prevented by using braces that yield in compression or buckle elastically at low axial loads. The advantages of altering beams of a braced frame with weak short columns are described. The beam strength can be reduced to produce a more favorable (ductile) frame failure mechanism. Combining bracing with beam alterations can significantly improve inelastic behavior of the braced frame.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Badoux, M. (1987). “Seismic retrofitting of reinforced concrete frame structures with steel bracing systems,” thesis presented to The University of Texas, at Austin, Tex., in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
2.
Badoux, M., and Jirsa, J. O. (1987). “Retrofitting of reinforced concrete structures with steel bracing systems.” International Association of Bridge and Structural Engineers Symp., Paris, France.
3.
Black, G., Wenger, W., and Popov, E. (1980). “Inelastic buckling of steel structures under cyclic load reversals.” UCB/EERC Report—80/40, Berkeley, Calif., Oct.
4.
Bush, T., et al. (1986). “Behavior of a strengthened reinforced concrete frame.” Proc., Third U.S. Nat. Conf. on Earthquake Engrg., Earthquake Engineering Research Institute, El Cerrito, Calif.
5.
Del Valle, E. (1980). “Some lessons from the March 14 earthquake in Mexico City.” Proc., Seventh World Conf. on Earthquake Engrg., Istanbul, Turkey.
6.
Filiatrault, A., and Cherry, S. (1986). “Seismic tests of friction damped steel frames.” Proc., Third Conf. Engrg. Mech. Div. of ASCE, Univ. of California, Los Angeles, Calif.
7.
Jain, A. K., and Goel, S. C. (1978). “Hysteresis models for steel members subjected to cyclic buckling or cyclic end moments and buckling.” Univ. of Michigan Res. Report UMEE 78R6, Ann Arbor, Mich., Dec.
8.
Jones, E. A., and Jirsa, J. O. (1986). “Seismic strengthening of a reinforced concrete frame using structural steel bracing.” PMFSEL Report No. 86‐5, Univ. of Texas at Austin, Tex., May.
9.
Kanaan, A. E., and Powell, G. H. (1973). “DRAIN‐2D, a general purpose computer program for dynamic analysis of inelastic plane structures.” Report EERC 73‐6 and EERC 73‐22, Univ. of California, Berkeley, Calif.
10.
Kawamata, S., and Masaki, Q. (1980). “Strengthening effect of eccentric steel braces to existing RC frames.” Proc., Seventh World Conf. on Earthquake Engrg., Istanbul, Turkey.
11.
Sugano, S. (1982). “An overview of the state‐of‐the‐art in seismic strengthening of existing reinforced concrete buildings in Japan.” Proc., Third Seminar on Repair and Retrofit of Structs., Ann Arbor, Mich., 328–349.
12.
Umehara, H., and Jirsa, J. O. (1982). “Shear strength and deterioration of short reinforced concrete columns under cyclic deformations.” PMFSEL 82‐3, The Univ. of Texas at Austin, Tex.
13.
Woodward, K., and Jirsa, J. O. (1984). “Influence of reinforcement on RC short column lateral resistance.” J. Struct. Engrg., ASCE, 110(1), 90–104.
14.
Wyllie, L. (1983). “Seismic strengthening procedures for existing buildings.” Strengthening of Building Structures—Diagnosis and Theory, International Association of Bridge and Structural Engineering Symp., Venice, Italy, 363–370.
Information & Authors
Information
Published In
Copyright
Copyright © 1990 ASCE.
History
Published online: Jan 1, 1990
Published in print: Jan 1990
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.