Earthquake Simulator Testing of Concentric Braced Dual System
Publication: Journal of Structural Engineering
Volume 115, Issue 8
Abstract
A six‐story concentrically chevron‐braced dual steel system is subjected to 20 earthquake ground motions with effective peak accelerations of up to 0.40 g on the earthquake simulator at the University of California at Berkeley. The design of the structure has been reviewed in accordance with the 1979 Uniform Building Code. The construction, dynamic characteristics, and experimental behavior of this test model are discussed. The structural strength is reached after severe buckling and ruptures of the concentric braces. The reduction of elastic strength demand due to developed ductility is on the order of 1.5. A substantial overstrength on the order of 2.4 with respect to the nominal yielding strength of the structure is observed and its importance is discussed in terms of the values of the response modification factor adopted by the Applied Technology Council (ATC). Based upon the test results, the role of the ductile moment‐resisting space frame in the dual system is discussed. Conclusions are drawn regarding the suitability of the response modification factors recommended by ATC. To prevent and/or to delay severe buckling and rupture of the braces, improvement in their proportioning for this type of system is suggested.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bertero, V. V. (1986). “Implications of recent earthquakes and research on earthquake‐resistant design and construction of buildings.” Report No. UCB/EERC‐86/03, Earthquake Engrg. Res. Ctr., Univ. of California, Berkeley, Calif., Mar.
2.
Foutch, D. A., Goel, S. C., and Roeder, C. W. (1987). “Seismic testing of fullscale steel building—part I.” J. Struct. Engrg., ASCE, 113(11), 2111–2129.
3.
Krawinkler, H. (1987). “Seismic code development for steel structures.” Bull. New Zealand Nat. Soc. for Earthquake Engrg., Wellington, New Zealand, 20(2), 127–133.
4.
Monkarz, P. D., and Krawinkler, H. (1981). “Theory and application of experimental model analysis in earthquake engineering.” Report No. 50, The John A. Blume Earthquake Engrg. Ctr., Dept. of Civ. Engrg., Stanford Univ., Stanford, Calif., June.
5.
“Recommendations for a U.S.‐Japan cooperative research program utilizing large scale facilities.” (1979). Report No. UCB/EERC‐79/26, U.S‐Japan Planning Group, Cooperative Research Program Utilizing Large‐Scale Testing Facilities for the Earthquake Engrg. Res. Ctr., Univ. of California, Berkeley, Calif.
6.
Recommended lateral force requirements and commentary. (1987). Seismology Committee, Struct. Engrs. Assoc. of California, San Francisco, Calif.
7.
Specification for the design, fabrication and erection of structural steel for buildings. (1978). 8th ed., Am. Inst. of Steel Constr., New York, N.Y.
8.
“Tentative provisions for the development of seismic regulations for buildings.” (1978). Special Publication 510, (ATC Report 3‐06), Appl. Tech. Council, Nat. Bureau of Standards, Washington, D.C., June.
9.
Uang, C. M. (1985). “Experimental and analytical study of the hysteretic behavior of steel composite girders.” CE 299 Report, Univ. of California, Berkeley, Calif., May.
10.
Uang, C. M., and Bertero, V. V. (1986). “Earthquake simulation tests and associated studies of a 0.3‐scale model of a six‐story concentric braced steel structure.” Report No. UCB/EERC‐86/10, Earthquake Engrg. Res. Ctr., Univ. of California, Berkeley, Calif., Dec.
11.
Uniform building code. (1979). Int. Conf. of Bld. Officials, Whittier, Calif.
12.
Watabe, M., and Ishiyama, K. (1980). “Earthquake resistant regulations for building structures in Japan.” Earthquake resistant regulations—a world list, Bldg. Res. Inst., Tsukuba, Japan.
13.
Whittaker, A. S., Uang, C. M., and Bertero, V. V. (1989). “Experimental behavior of dual steel system.” J. Struct. Engrg., ASCE, 115(1), 183–200.
14.
Yamanouchi, H., et al. (1987). “Summary of full‐scale tests on a six‐story steel building.” Proc. Joint Tech. Coordinating Committee Meeting, U.S.‐Japan Cooperative Research Program Utilizing Large Scale Test Facilities, Tsukuba, Japan, July.
Information & Authors
Information
Published In
Copyright
Copyright © 1989 ASCE.
History
Published online: Aug 1, 1989
Published in print: Aug 1989
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.