P‐Delta Analysis of Building Structures
Publication: Journal of Structural Engineering
Volume 115, Issue 4
Abstract
The trend towards more slender and lighter building structures has resulted in potentially more significant P‐delta effects; this has led to the demand for simple and accurate methods of P‐delta analysis. Methods are reviewed and compared in terms of their efficiency and accuracy. Considered roughly in their order of sophistication, the methods reviewed include the amplification factor method, the direct method, the iterative method, the negative property member methods, and the second‐order computer program method. In addition to these, a new method similar to the iterative method, but based on analyses using the actual gravity loading applied to successive deflected shapes, is presented. The results are identical to those given by the iterative method, while the analysis takes less than one‐third of the time. Factors that differentiate the methods include their accuracy, ease of use, whether they are for hand or computer use, and whether they are applicable to all types of structures or only to certain types.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Adams, P. F. (1974). The design of steel beam‐columns. Can. Steel Industries Construction Council, Willowdale, Ont., Can.
2.
Clough, R. W., and Penzien, J. (1975). Dynamics of structures. McGraw‐Hill Book Co., New York, N.Y.
3.
Goldberg, J. E. (1947). “Analysis of two‐column symmetrical bents and Vierendeel trusses having parallel and equal chords.” J. Am. Conc. Inst., 19(3), 225–234.
4.
Goldberg, J. E. (1973). “Approximate methods for stability and frequency analysis of tall buildings.” Proc. of the Regional Conference on Tall Buildings, Madrid, Spain, 123–146.
5.
Goldberg, J. E. (1974). “Approximate methods in stress and stability analysis of tall building frames.” Proc. of the Regional Conference on Tall Buildings, Bangkok, Thailand, 177–194.
6.
Handbook of steel construction, (1980). 3rd Ed., Can. Inst. of Steel Constr., Willowdale, Ont., Can., 4–21.
7.
LeMessurier, W. J. (1977). “A practical method of second order analysis.” AISC Engrg. J., 14(2), 49–67.
8.
Nair, R. S. (1975). “Overall elastic stability of multistory buildings.” J. Struct. Div., ASCE, 101(12), 2487–2503.
9.
Nixon, D., Beaulieu, D., and Adams, P. F. (1975). “Simplified second order frame analysis.” Can. J. Civ. Engrg., 2(4), 602–605.
10.
Rutenberg, A. (1981). “A direct P‐delta analysis using standard plane frame computer programs.” Comput. Struct., 14(1–2), 97–102.
11.
Rutenberg, A. (1982). “Simplified P‐delta analyses for asymmetric structures.” J. Struct. Div., ASCE, 108(9), 1995–2013.
12.
Stafford Smith, B., and Gaiotti, R. (1988). “Iterative gravity load method for P‐delta analysis.” Structural Engrg. Report No. 88‐4, Dept. of Civ. Engrg. and Applied Mech., McGill Univ., Montreal, P.Q., Can.
13.
Timoshenko, S. P., and Gere, J. M. (1961). Theory of elastic stability, 2nd Ed., McGraw‐Hill Book Co., New York, N.Y.
Information & Authors
Information
Published In
Copyright
Copyright © 1989 ASCE.
History
Published online: Apr 1, 1989
Published in print: Apr 1989
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.