Five‐Spring Element for Biaxially Bent R/C Columns
Publication: Journal of Structural Engineering
Volume 115, Issue 2
Abstract
The cyclic behavior of reinforced concrete columns subjected to biaxial bending was determined using a hysteretic element consisting of five axial springs. Four composite springs and one concrete spring are used. Their basic properties are controlled by the calculated balanced moment and axial force. A new simple hysteresis model was used for the composite springs and an existing model was used for the concrete spring. The five‐spring element (FSE) was evaluated based on its performance in simulating the response of several reinforced concrete test specimens. The element appeared to be successful in reproducing the response as long as the peak axial force did not exceed the balanced axial force. The FSE was also used to determine the response histories for several bridges. The results indicate that the response histories found based on FSE can be considerably different from those based on an elastoplastic yield surface model.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Emori, K., and Schnobrich, W. C. (1978). “Analysis of reinforced concrete framewall structures for strong motion earthquakes.” Civil Engineering Studies, SRSNo. 457, Univ. of Illinois, Urbana‐Champaign, Ill.
2.
Ghusn, E. G., and Saiidi, M. (1986). “A simple hysteresis element for biaxial bending of R/C columns and implementation in NEABS‐86.” Report No. CCEER86‐1, Center for Civ. Engrg. Earthquake Res., Univ. of Nevada, Reno, Nev.
3.
Lai, S.‐S. (1984). “Inelastic analysis of reinforced concrete space frame under biaxial earthquake motions,” thesis presented to the University of Toronto, at Toronto, Canada, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
4.
Lai, S.‐S. (1987). “Post‐yield hysteretic biaxial models for reinforced concrete members.” ACI Struct. Journal, May–June, 235–245.
5.
Lai, S.‐S., Will, G. T., and Otani, S. (1984). “Model for inelastic biaxial bending of concrete members.” J. Struct. Engrg., ASCE, 110(11), 2563–2584.
6.
Linbeck, L. E. (1987). “Behavior of reinforced concrete columns subjected to cyclic axial and lateral load reversals,” thesis presented to the University of Texas, at Austin, Tex., in partial fulfillment of the requirements for the degree of Master of Science.
7.
Otani, S., and Cheung, V. W.‐T. (1981). “Behavior of reinforced concrete columns subjected to biaxial lateral load reversals.” Publication 81‐02, Dept. of Civ. Engrg., Univ. of Toronto, Toronto, Canada.
8.
Padilla‐Mora, R., and Schnobrich, W. C. (1974). “Nonlinear response of framed structures subjected to two‐dimensional earthquake motion.” Civil Engineering Studies, SRS No. 408, Univ. of Illinois, Urbana‐Champaign, Ill.
9.
Pecknold, D. A. (1974). “Elastic structural response to 2D ground motion.” J. Engrg. Mech. Div., ASCE, 100(EM5), 949–963.
10.
Penzien, J. R., Imbsen, R., and Liu, W. D. (1981). “NEABS: Nonlinear earthquake analysis of bridge systems (Users Manual). “NISSEE/Computer Applications, Earthquake Engrg. Res. Center, Univ. of California, Berkeley, Calif.
11.
Saiidi, M., and Sozen, M. A. (1979). “Simple and complex models for nonlinear seismic response of reinforced concrete structures.” Civil Engineering Studies, SRS No. 465, Univ. of Illinois, Urbana‐Champaign, Ill.
12.
Saiidi, M., Ghusn, G., and Jiang, Y. (1987). “Simple modeling of biaxial bending response under earthquake loads.” Pacific Conference on Earthquake Engineering, Wairakei, New Zealand.
13.
Sozen, M. A. (1974). “Hysteresis in Structural elements.” Applied Mechanics in Earthquake Engineering. 8, Nov., 63–98.
Information & Authors
Information
Published In
Copyright
Copyright © 1989 ASCE.
History
Published online: Feb 1, 1989
Published in print: Feb 1989
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.