Cyclic Kesfonse of Concrete Bracing Members
Publication: Journal of Structural Engineering
Volume 115, Issue 1
Abstract
The paper presents the hysteresis behavior of axially loaded reinforced concrete bracing members. The object was to study the reduction in stiffness in relation to the number of cycles and the energy dissipation capacity. An existing ´compression‐only loading syste was modified to provide tension‐compression cyclic loading. Eight specimens were tested, each having an effective length to the least lateral dimension ratio of 20 or 30. The effects of longitudinal steel, slenderness ratio, and confinement of concrete are analyzed in this paper. It is concluded that reinforced concrete bracing specimens possess considerably more strength and stiffness in compression than in tension. The initial stiffness in tension varied between 28–36% of the secant stiffness, based on the transformed concrete area. The stiffness in tension cycles varied between 13–140% and in compression cycles between 30–400% of the initial tension stiffness. A simple triangular hysteresis model is proposed that accounts for different elastic stiffnesses in tension and compression, stiffness degradation, and pinching‐in effects.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Anderson, J. C., and Townsend, W. H. (1977). “Models for R. C. frames with degrading stiffness.” J. Struct. Div., ASCE, 103(12), 2361–2376.
2.
“Code of practice for earthquake resistant construction.” (1976). IS:4326‐1976, Indian Standards Institution, New Delhi, India.
3.
“Code of practice for plain and reinforced concrete.” (1979). 18:456‐1978, Indian Standards Institution, New Delhi, India.
4.
Desai, J. P. (1986). “Hysteresis behavior of R.C. braces and the seismic response of braced frames,” thesis presented to the University of Roorkee, at Roorkee, India, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
5.
Hudson, D. E. (1965). “Equivalent viscous friction for hysteretic systems in the earthquake like excitations.” Proc., 3rd World Conf. on Earthquake Engineering, Auckland, New Zealand, 2, 185–206.
6.
Kawamata, S., and Ohnuma, M. (1980). “Strengthening effect of eccentric steel braces to existing R.C. frames.” Proc., 7th World Conf. on Earthquake Engineering, Istanbul, Turkey, 4, 513–520.
7.
Matthewson, C. D., and Davey, R. A. (1980). “Precast concrete braced frames incorporating load limiting energy dissipating devices in an earthquake resistant building.” Proc., 7th World Conf. on Earthquake Engineering, Istanbul, Turkey, 7, 349–356.
8.
Mizuhata, K., et al. (1980). “Earthquake response analysis of several kinds of structures with realistic restoring force characteristics.” Proc., 7th World Conf. on Earthquake Engineering, Istanbul, Turkey, 7, 545–552.
9.
Sonobe, Y., et al. (1980). “Behaviour of braced R.C. frames subjected to cyclic lateral loads.” Proc., 7th World Conf. on Earthquake Engineering, Istanbul, Turkey, 6, 553–556.
10.
Tani, S., et al. (1973). “Earthquake response of R.C. structures considering the discontinuous failure process to collapse.” Proc., 5th World Conf. on Earthquake Engineering, Rome, Italy, 1, 1379–1388.
Information & Authors
Information
Published In
Copyright
Copyright © 1989 ASCE.
History
Published online: Jan 1, 1989
Published in print: Jan 1989
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.