Behavior of Concrete Structures in Service
Publication: Journal of Structural Engineering
Volume 115, Issue 1
Abstract
In concrete structures, durability and compliance with functional requirements are strictly related to behavior in service conditions. In this paper, the analysis of the behavior of reinforced, partially prestressed, and prestressed concrete members is developed in a unified way by identifying the characteristic phases in the life of a structure: instantaneous load‐effect variations and effects of sustained loads. The analysis is performed for cracked or uncracked elements depending on whether or not the stresses due to load effects exceed the section's tensile strength. The effects of creep and shrinkage, of the variations in concrete modulus, and of the relaxation of the reinforcement are taken into account. The calculation of displacements and the evolution of redundant effects is carried out on the basis of the mean strain values which are determined by taking into account the influence of tension stiffening. For practical calculation purposes, the procedure advanced in this paper is based on the constitutive laws of the materials laid down in the 1978 Comite Euro‐International du Beton (CEB) Model Code for Concrete Structures.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bazant, Z. P. (1972). “Prediction of concrete creep effects using age‐adjusted effective modulus method.” ACI J., 69(20), 212–217.
2.
Chiorino, M. A., ed., Structural effects of time‐dependent behaviour of concrete. CEB Manual No. 142/142bis, Georgi Publishing Company, Saint‐Saphorin, Switzerland.
3.
Cohn, M. Z., ed. (1983). Int. Symposium on Non Linearity and Continuity in Prestressed Concrete, 1.2.3., Univ. of Waterloo, Waterloo, Ontario, Canada, July.
4.
Cohn, M. Z. (1984). “Partial prestressing: From theory to practice.” NATO ASI Series, 113a, b, Martinus Nijhoff Publishers, Dordrecht, The Netherlands.
5.
Colonnetti, G. (1921). “Per una teoria generale delle coazioni elastiche,” Atti della Reale Accademia delle Scienze di Torino, Torino, Italy, 56, (in Italian).
6.
Eurocode No. 2: Common unified rules for concrete structures. (1984). Commission of the European Communities. Industrial processes building and Civil Engineering, ECSC‐EEG‐EAEC, Brussels‐Luxembourg.
7.
Favre, R., Beeby, A. W., Falkner, H., Koprna, M., and Schiessel, P. (1985). CEB design manual on cracking and deformations. Ecole Polytechnique de Lausanne, Switzerland.
8.
Ghali, A., and Trevino, J. (1985). “Relaxation of steel in prestressed concrete.” PCI J., 30(5), 82–94.
9.
Model code for concrete structures. (1978). Comité Euro‐Int. de Béton (CEB), Fédération Int. du la Précontrainte (FIP), Paris, France.
10.
Mola, F. (1985). “Valutazione dello stato tensionale a lungo termine nelle sezioni in cemento armato integralmente e parzialmente precompresso.” Atti delle giornate AICAP, Riva del Garda, Italy (in Italian).
11.
Naaman, A. E. (1985). “Partially prestressed concrete: Review and recommendations.” PCI J., 30(6), 30–71.
12.
“Recommendations on practical design of reinforced and prestressed concrete structures.” (1982). Based on CEB‐FIP MC 78. Fédération Int. de la Précontrainte. 9th FIP Congress, Stockholm, Sweden.
Information & Authors
Information
Published In
Copyright
Copyright © 1989 ASCE.
History
Published online: Jan 1, 1989
Published in print: Jan 1989
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.