Experimental Behavior of Dual Steel System
Publication: Journal of Structural Engineering
Volume 115, Issue 1
Abstract
A six‐story eccentrically braced dual steel system (EBDS) was subjected to 24 earthquake ground motions with effective peak accelerations of up to 0.55 g on the earthquake simulator at the University of California at Berkeley. The design, construction, dynamic characteristics and experimental behavior of this eccentrically braced system are discussed in this paper. The EBDS was analyzed for its compliance with current earthquake‐resistant regulations that include the 1985 Uniform Building Code (UBC), 1984 Applied Technology Council (ATC) 3–06, and 1986 Structural Engineers Association of California (SEAOC). A substantial overstrength of this dual system with respect to its nominal yielding strength was observed and this is discussed in terms of the response modification factors currently adopted by the ATC and SEAOC. The lateral force distributions for the elastic level tests corresponded to the code‐base design lateral force distributions but varied considerably for the collapse level tests. The role of the ductile momentresisting space frame (DMRSF) in the EBDS is discussed in light of its performance during the testing program. Conclusions are drawn regarding the suitability of the EBDS for regions of high seismic risk and the response modification factors and lateral force distributions currently used or implied in the UBC, ATC, and SEAOC.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
“Tentative provisions for the development of seismic regulations for buildings.” (1984). Applied Technology Council, ATC 3‐06, Nat. Bureau of Standards, U.S. Dept. of Commerce, Washington, D.C.
2.
Austin, M. A., Pister, K. S., and Mahin, S. A. (1983). “A methodology for compute‐aided design of earthquake‐resistant steel structures.” Report No. UCB/EERC‐ 85/13, Earthquake Engrg. Res. Ctr., Univ. of Calif., Berkeley, Calif., July.
3.
Bertero, V. V., Aktan, A. E., Charney, F. A., and Sause, R. (1984). “U.S.‐Japan cooperative research program: Earthquake simulation tests and associated studies of a 1/5th scale model of a 7‐story reinforced concrete test structure.” Report No. UCB/EERC‐84/05, Earthquake Engrg. Ctr., Univ. of Calif., Berkeley, Calif. June.
4.
Bertero, V. V. (1986). “Implications of recent earthquakes and research on earthquake‐resistant design and construction of buildings.” Report No. UCB/EERC‐86/03, Earthquake Engrg. Res. Ctr., Univ. of Calif., Berkeley, Calif., Mar.
5.
Foutch, D. A., Goel, S. C., and Roeder, C. W. (1986). “Seismic testing of fullscale steel building—Parts I and II.” J. Struct. Engrg., ASCE, 113(11), 2111–2145.
6.
Hjelmstad, K. D., and Popov, E. P. (1983). “Seismic behavior of active beam links in eccentrically braced frames.” Report No. UCB/EERC‐83/15, Earthquake Engrg. Res. Ctr., Univ. of Calif., Berkeley, Calif., July.
7.
Uniform Building Code. (1985). Int. Conf. of Building Officials, Whittier, Calif.
8.
Kasai, K., and Popov, E. P. (1986). “A study of seismically resistant eccentrically braced steel frame systems.” Report No. UCB/EERC‐86/01, Earthquake Engrg. Res. Ctr., Univ. of Calif., Berkeley, Calif., Jan.
9.
Manheim, D. (1982). “On the design of eccentric braced frames,” thesis presented to the University of California, Berkeley, Calif., in partial fulfillment of the requirements for the degree of Doctor of Engineering.
10.
Roeder, C. W., and Popov, E. P. (1977). “Inelastic Behavior of Eccentric Braced Steel Frames Under Cyclic Loading.” Report No. UCB/EERC‐77/18, Earthquake Engrg. Res. Ctr., Univ. of Calif., Berkeley, Calif., Aug.
11.
“Recommended Lateral Force Requirements.” (1986). Structural Engineers Association of California, San Francisco, Calif.
12.
“Recommendations for a U.S.‐Japan Cooperative Research Program Utilizing Large Scale Facilities.” (1979). U.S.‐Japan Planning Group, Cooperative Research Program Utilizing Large‐Scale Testing Facilities, Report No. UCB/EERC‐79/26, Earthquake Engrg. Res. Ctr., Univ. of Calif., Berkeley, Calif.
13.
Uang, C. M., and Bertero, V. V. (1986). “Earthquake simulation tests and associated studies of a 0.3‐scale model of a six‐story concentric braced steel structure.” Report No. UCB/EERC‐86/10, Earthquake Engrg. Res. Ctr., Univ. of Calif., Berkeley, Calif., Dec.
14.
Whittaker, A. S., Uang, C. M., and Bertero, V. V. (1987). “Earthquake singulation tests and associated studies of a 0.3‐scale model of a six‐story eccentrically braced steel structure.” Report No. UCB/EERC‐87/02, Earthquake Engrg. Res. Ctr., Univ. of Calif., Berkeley, Calif., July.
Information & Authors
Information
Published In
Copyright
Copyright © 1989 ASCE.
History
Published online: Jan 1, 1989
Published in print: Jan 1989
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.