Problems in Predicting Seismic Responses of RC Buildings
Publication: Journal of Structural Engineering
Volume 114, Issue 9
Abstract
A methodology to apply linear and nonlinear analysis rationally in the seismic design, vulnerability evaluation or upgrade design of RC buildings is presented. Some of the initial steps in this methodology are discussed and exemplified, while the remaining steps will be discussed in a separate paper. It is recommended to apply analysis to study in a step‐by‐step interactive manner the bounds of critical section, the critical element, and the complete structural response as a structure is loaded to failure under static load increments which are monotically and simultaneously applied in both lateral directions. This analysis procedure is assessed to be more rational than conducting time‐history analyses of detailed models. The reliability in the bounds of generated static response would naturally depend on perceiving and accurately modeling all the critical local and global mechanisms which influence response. Some of the parameters and mechanisms which significantly influenced the test response of idealized assemblies and building specimens are described. The influence of these parameters and mechanisms on element response bounds is illustrated.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Aktan, A. E., and Bertero, V. V. (1984a). “Seismic responses of R/C frame‐wall structures.” J. Struct. Engrg., ASCE.
2.
Aktan, A. E., and Bertero, V. V. (1984b). “Conceptual seismic resistant design of frame‐wall structures.” J. Struct. Engrg., ASCE.
3.
Aktan, A. E., and Bertero, V. V. (1985). “RC structural walls: seismic design for shear.” J. Struct. Engrg., ASCE, 3(8), 1775–1792.
4.
Aktan, A. E., and Bertero, V. V. (1987). “Evaluation of seismic response of RC buildings loaded to failure.” J. Struct. Engrg., ASCE, 113(5), 1092–1110.
5.
Aktan, A. E., Bertero, V. V., and Sakino, K. (1985). “Lateral flexibility characteristics of R/C frame‐wall structures.” Publication SP‐86, American Concrete Institute, Detroit, MI.
6.
Aktan, A. E., and Nam, D. H. (1987). “Inelastic analysis for vulnerability assessment.” Proc., Sixth Annual Structures Congress of American Society of Civil Engineers.
7.
Aktan, A. E., and Nelson, G. E. (1986). “Inelastic analysis of RC sections.” Proc., Third U.S. National Conference on Earthquake Engineering, Earthquake Engineering Research Institute, El Cerrito, CA.
8.
Aktan, A. E., and Pecknold, D. A. (1974). “Response of a reinforced concrete section to two‐dimensional curvature histories.” J. the American Concrete Institute, 71(5), 246–250.
9.
American Society of Civil Engineers (1982). Finite element analysis of reinforced concrete. New York, NY.
10.
American Society of Civil Engineers (1985). Finite element analysis of reinforced concrete structures. New York, NY.
11.
Applied Technology Council (1987). ATC‐14, “Evaluating the seismic resistance of existing buildings,” Redwood City, CA.
12.
Bertero, V. V. et al. (1985). “Earthquake simulator tests and associated analytical and correlation studies of a 1/5 scale replica model of a full scale, 7‐Story R/C frame‐wall structure.” Publication SP‐84, American Concrete Institute, Detroit, MI.
13.
Bertero, V. V. et al. (1983). “Mechanical characteristics of materials used in a 1/5 scale model of a 7‐story reinforced concrete test structure.” Report No. UCBIEERC‐83I21, Earthquake Engineering Research Center, Univ. of California, Berkeley.
14.
Charney, F. A. (1986). “Modeling 3‐D response in R/C frame‐wall structures.” Dynamic Response of Structures, ASCE.
15.
Chen, P. F.‐S., and Powell, G. H. (1982). “Generalized plastic hinge concepts for 3D beam‐column elements.” Report No. UCBIEERC‐82120, Univ. of California, Berkeley.
16.
Filippou, F. C., Popov, E. P., and Bertero, V. V. (1986). “Analytical studies of hysteretic behavior of R/C joints.” J. Struct. Engrg., 112(7), 1605–1623.
17.
International Conference of Building Officials (1985). Uniform Building Code, Whittier, Calif.
18.
Joglekar, M., et al. (1985). “Full scale tests of beam‐column joints.” Publication SP‐84, American Concrete Institute, Detroit, MI.
19.
Kaba, S. A., and Mahin, S. A. (1983). “Interactive computer analysis method for predicting the inelastic cyclic behavior of structural sections.” Report No. UCBIEERC‐83/18, Earthquake Engineering Research Center, Univ. of California, Berkeley.
20.
Keshavarzian, M., and Schnobrich, W. C. (1985). “Analytical models for the nonlinear seismic analysis of reinforced concrete structures.” Engineering Structures, 7(2), 131–142.
21.
Lai, S.‐S., Will, G. T., and Otani, S. (1984). “Model for inelastic biaxial bending of concrete members.” J. Struct. Engrg.
22.
Mahin, S. A., and Bertero, V. V. (1978). “Prediction of nonlinear seismic building behavior.” J. Tech. Councils, ASCE, 104(TC1).
23.
Moehle, J. P., and Alarcon, L. F. (1986). “Seismic analysis methods for irregular buildings.” J. Struct. Engrg., 112(1), 35–53.
24.
Nelson, G. E., and A. E. Aktan (1986). “Response prediction of wall and T‐beam elements in RC buildings, and user's guide for RCSA.” Research Report 86‐03, Structural Engineering and Structural Mechanics, Louisiana State Univ. (Program RCSA available from NISEE, University of California, Davis Hall, Berkeley, CA 94720).
25.
Neuss, C. F., Maison, B. F., and Bouwkamp, J. G. (1983). “A study of computer modeling formulation and special analytical procedures for earthquake response of multistory buildings.” A Report to the National Science Foundation, J. G. Bouwkamp, Inc., Berkeley, Calif.
26.
Oliva, M. G., and Clough, R. W. (1987). “Biaxial seismic response of R/C frames.” J. Struct. Engrg., 113(6), 1264–1281.
27.
Otani, T., Shiohara, H., and Aoyama, H. (1985). “Analysis of the full scale seven story reinforced concrete test structure.” Publication SP‐84, U.S.‐Japan American Concrete Institute, Detroit, MI.
28.
Park, R., Kent, D. C., and Sampson, R. A. (1972). “Reinforced concrete members with cyclic loading.” J. Struct. Engrg., ASCE.
29.
Saiidi, M., and Sozen, M. A. (1981). “Simple nonlinear seismic analysis of R/C structures.” J. Struct. Engrg., ASCE, 107(ST5), 937–952.
30.
Seismology Committee of the Structural Engineers Association of California (1985). Tentative Lateral Force Requirements, San Francisco, Calif.
31.
Sucuoglu, H., and Aktan, A. E. (1980). “Hysteretic response to reinforced concrete frames.” Publication SP‐63, American Concrete Institute.
32.
Vecchio, F., and Collins, M. P. (1986). “The modified compression field theory for reinforced concrete elements subjected to shear.” Adjournal, 83(2), 219–231.
33.
Yoshimura, M., and Kurose, Y. (1985). “Inelastic behavior of the building.” Publication SP‐84, American Concrete Institute, Detroit, MI.
Information & Authors
Information
Published In
Copyright
Copyright © 1988 ASCE.
History
Published online: Sep 1, 1988
Published in print: Sep 1988
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.