Flowcharts for Biaxial Bending in R/C Tied Columns
Publication: Journal of Structural Engineering
Volume 114, Issue 6
Abstract
Flowcharts are presented for the analysis and design of biaxially and uniaxially loaded, reinforced‐concrete, tied columns in accordance with the “moment magnification method” of ACI 318‐83, section 10.11. Nonslender and slender columns in braced and unbraced frames are considered. The case of “appreciable” sway due to gravity loads in unbraced frames is also considered. The flowcharts can be used as step by step guides for manual computations or for coding subroutines in a computer program. The charts can easily be modified for any cross section shape and for other national or international codes. Where the wording of the American Concrete Institute code and commentary appears unclear, its intent is explored, discussed, and followed.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Breen, E. J., MacGregor, G. J., and Pfrang, O. E. (1972). “Determination of effective length factors for slender concrete columns.” J. Am. Concr. Inst., 69(11), 669–672.
2.
Bresler, B. (1960). “Design criteria for reinforced concrete columns under axial load and biaxial bending.” J. Am. Concr. Inst., 57, Nov., 481–490.
3.
“Building code requirements for reinforced concrete.” (1983). ACI318‐83, American Concrete Institute, Detroit, Mich.
4.
Commentary on building code requirements for reinforced concrete. (1983). American Concrete Institute, Detroit, Mich.
5.
“Design handbook in accordance with the strength design method, vol. 2; columns.” (1983). Publication SP‐17A, American Concrete Institute, Detroit, Mich.
6.
Gowens, A. J. (1975). “Biaxial bending simplified.” Reinforced concrete columns, (SP‐50), American Concrete Institute, Detroit, Mich., 233–261.
7.
Harik, I. E., and Gesund, H. (1986). “Reinforced concrete columns in biaxial bending.” Concrete framed structures, stability and strength, R. Narayanan, ed., Elsevier Applied Science Publishers, London, England, 111–132.
8.
Huang, C., Harik, I. E., and Gesund, H. (1987). “CADCO: analysis and design of uniaxially and biaxially bent nonslender and slender R/C tied columns in braced and unbraced frames.” Design of structural concrete/computer publication COM‐3, American Concrete Institute, Detroit, Mich.
9.
Notes on ACI 318‐83 building code requirements for reinforced concrete. (1984). 4th Ed., G. B. Neville, ed., Portland Cement Association, Skokie, Ill.
10.
Pannell, F. N. (1963). “Failure surfaces for members in compression and biaxial bending.” J. Am. Concr. Inst., 60, Jan., 129–140.
11.
Parme, A. L., Nieves, J. M., and Gowens, A. (1966). “Capacity of reinforced rectangular columns subject to biaxial bending.” J. Am. Concr. Inst., 63, Sep., 911–923.
12.
Specification for the design, fabrication and erection of structural steel for buildings. (1983). American Institute of Steel Construction, Chicago. Ill.
13.
Wang, C. K., and Salmon, D. G. (1985). Reinforced concrete design. 4th Ed., Harper and Row Publishers, New York, N.Y.
Information & Authors
Information
Published In
Copyright
Copyright © 1988 ASCE.
History
Published online: Jun 1, 1988
Published in print: Jun 1988
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.