Field Transfer Matrix for Nonlinear Curved Beams
Publication: Journal of Structural Engineering
Volume 114, Issue 3
Abstract
For large‐displacement and small‐strain analysis of planar general arches, the field transfer matrix is formulated for a curved element applicable to arbitrary arch geometry. The total displacements are clearly separated into the large rigid‐body displacements and the small elastic deformations. The formulation includes no approximation except the assumed small deflection theory for the elastic deformations. To establish a general computational strategy, however, the initial arch configuration is assumed to be accurately represented by using blending functions. No special shape functions for displacements are needed. The formulation is shown to be simple and accurate in theory and useful in practice.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ashwell, D. G., and Sabir, A. B. (1971). “Limitations of certain curved finite elements when applied to arches.” Internat. J. Mech. Sci. 13(2), 133–139.
2.
Ashwell, D. G., and Sabir, A. B. (1974). “On the finite elements calculation of stress distribution in arches.” Internat. J. Mech. Sci., 16(1), 21–29.
3.
Austin, W. J., and Ross, T. J. (1976). “Elastic buckling of arches under symmetric loading.” J. Struct. Div., ASCE, 102(5), 1085–1095.
4.
DaDeppo, D. A., and Schmidt, R. (1969). “Sideway buckling of deep circular arches under a concentrated load.” J. Appl. Mech., 36(2), 325–327.
5.
Dawe, D. J. (1971). “A finite‐deflection analysis of shallow arches by the discrete element method.” Internat. J. Numer. Methods in Engrg., 3(4), 529–552.
6.
Dawe, D. J. (1974). “Curved finite elements for the analysis of shallow and deep arches.” Comp. and Struct., 4, 559–580.
7.
Frisch‐Fray, R. (1960). “The deformation of elastic circular rings.” Austr. J. Appl. Sci., 11, 329–340.
8.
Gellert, M., and Lausen, M. E. (1976). “Formulation and convergence of a mixed finite element method applied to elastic arches of arbitrary geometry and loading.” Comp. Methods Appl. Mech. and Engrg., 7, 565–572.
9.
Gong, S. X., and Fujii, F. (1986). “Blending functions used in discrete and nondiscrete mixed methods for plate bending.” Comp. and Struct., 22(4), 565–572.
10.
Huddleston, J. V. (1968). “Finite deflection and snap‐through of high circular arches.” J. Appl. Mech., 35(4), 763–769.
11.
Kikuchi, F. (1975). “On the validity of the finite element analysis of circular arches represented by assemblage beam elements.” Comp. Methods Appl. Mech. and Engrg., 5, 253–276.
12.
Lee, S. W., and Pian, T. H. H. (1978). “Improvement of plate and shell elements by mixed formulations.” Am. Inst. of Aeronaut, and Astronaut. Journal, 16, 29–34.
13.
Noor, A. K., Greene, W. H., and Hartley, S. J. (1977). “Nonlinear finite element analysis of curved beams.” Comp. Methods Appl. Mech. and Engrg., 12, 289–307.
14.
Rohde, F. V. (1953). “Large deflections of a cantilever beam with uniformly distributed load.” Quart. Appl. Math., 9(3), 337–338.
15.
Seide, P. (1973). “Postbuckling behavior of circular rings with two or four concentrated loads.” Internat. J. Nonlinear Mech., 8, 169–178.
16.
Stolarski, H., and Belytschko, T. (1982). “Membrane locking and reduced integration for curved elements.” J. Appl. Mech., 49(1), 172–176.
17.
Stolarski, H., and Belytschko, T. (1983). “Shear and membrane locking in curved C° elements.” Comp. Methods Appl. Mech. and Engrg., 41(3), 279–296.
18.
Wang, T. M., Lee, S. L., and Zienkiewicz, O. C. (1961). “A numerical analysis of large deflection of beams.” Internat. J. Mech. Sci., 3(3), 219–228.
19.
Williams, F. V. (1964). “An approach to the nonlinear behaviour of the members of a rigid jointed plane framework with finite deflection.” Quart. J. Mech. Appl. Math., 17(4), 451–469.
20.
Yoshida, H., and Imoto, Y. (1973). “Inelastic lateral buckling of restrained beams.” J. Engrg. Mech., ASCE, 99(2), 343–366.
Information & Authors
Information
Published In
Copyright
Copyright © 1988 ASCE.
History
Published online: Mar 1, 1988
Published in print: Mar 1988
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.