Errors in Structural Engineering
Publication: Journal of Structural Engineering
Volume 114, Issue 11
Abstract
The majority of structural failures, whether collapse or functional, are attributable to errors in design, construction, or operation. This paper attempts to review selected literature on the subject of errors in structural engineering. Various features such as the frequency, magnitude, classification, and detection of error are considered, together with causes and environments for error propagation and the role of control strategies in error abatement. In this last respect, the viewpoint on costs largely drives the professional attitude to error. If the full costs fall on the perpetrator, then a lively interest in controls prevails. If the costs are spread among practitioners, then the interest abates and changes to the detection of socially tolerable levels of error and failure incidence. The relation between errors and aspects of professional life and education is also discovered. The significance of frequent personnel changes, compressed design‐construction time, belief in codes and complex calculations, low pay, professional inexperience, and novelty of the structure are considered.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Blockley, D. I. (1977). “Analysis of structural failures.” Proc. Inst. Civ. Engrs., London, England, I(62), 51–74.
2.
Brent, P. L. (1981) Charles Darwin: a man of enlarged curiosity. W. W. Norton & Co., New York, N.Y.
3.
Brown, C. B. (1979). “A fuzzy safety measure.” J. Engrg. Mech. Div., ASCE, 105(5), 855–872.
4.
Brown, C. B. (1986). “Incomplete design paradigm.” Proc. Workshop on Modeling Human Error in Struct. Design and Constr., National Science Foundation, 8–12.
5.
Brown, C. B., Johnson, J. F., and Loftus, J. J. (1984). “Subjective seismic assessments.” J. Struct. Engrg., ASCE, 110(9), 2212–2233.
6.
Ditlevsen, O. (1983). “Fundamental postulate in structural safety.” J. Engrg. Mech., ASCE, 109(4), 1096–1102.
7.
Drysdale, R. G. (1975). “Placement errors for reinforcing in concrete columns.” ACI J. 72(2), 9–15.
8.
Ellingwood, B., et al. (1980). “Development of a probability‐based load criterion for American national standard A58.” NBS Special Publication No. SP577, National Bureau of Standards, Washington, D.C.
9.
Feld, J. (1964). “Lessons from failures of concrete structures.” ACI Monograph No. 1, Am. Concr. Inst., Detroit, Mich.
10.
Fraczek, J. (1979). “ACI survey of concrete structure errors.” Concr. Int., 1(12), 14–20.
11.
Freudenthal, A. M. (1956). “Safety and the probability of failure.” Trans., ASCE, 121, 1337–1375.
12.
Godfrey, K. A., Jr. (1984a). “Building failures—construction related problems and solutions.” Civ. Engrg., ASCE, 54(5), 59–63.
13.
Godfrey, K. A., Jr. (1984b). “Building failure: design problems and solutions.” Civ. Engrg., ASCE, 54(6), 62–66.
14.
Hadipriono, F. (1985). “Analysis of events in recent structural failures.” J. Struct. Engr., ASCE, 111(7), 1468–1481.
15.
Harris, D. H., and Chaney, F. B. (1969). Human factors in quality assurance. John Wiley and Sons, Inc., New York, N.Y.
16.
Hauser, R. (1979). “Lessons from European failures.” Concr. Int., 1(12), 21–25.
17.
Ingles, O. G. (1979). “Human factors and errors in civil engineering.” Proc. ICASP‐3, Sydney, Australia.
18.
Ingles, O. G. (1986). “Where should we look for error control.” Proc. Workshop on Modeling Human Error in Struct. Design and Constr., National Science Foundation, 13–21.
19.
Ingles, O. G., and Saunders, J. R. (1975). “The concept of engineering,” Proc. 2nd Int. Conf. Appl. Stat. and Prob. in Soil and Struct. Engrg., Aachen, W. Germany.
20.
Knoll, F. (1982). “Human error in the building process—A research proposal,” J. Int. Assoc. of Bridge and Struct. Engrg., 17, 35–50.
21.
Lamb, T. M. (1985). “Reinforcing steel placement—why should we be concerned?” Conc. Int., 7(7).
22.
Ligtenberg, F. K. (1969). “Structural safety and catastrophic events.” IABSE Symp. on Concepts of Safety of Struct. and Meth. of Design, Int. Assoc. of Bridge and Struct. Engrs., London, England.
23.
Marciniec, T. M. (1987). “Actual tolerance used in cast‐in‐place concrete construction,” thesis presented to the Univ. of Washington, Seattle, Wash., in partial fulfillment of the requirements for the degree of Master of Science.
24.
Matousek, M. (1977). “Outcoming of a survey of 800 construction failures.” Colloq. on Inspection and Quality Control, Int. Assoc. of Bridge and Struct. Engrg., Cambridge, England.
25.
Melchers, R. E., et al. (1983–1985). “Human error in structural reliability.” Civil Engineering Reports I‐V, Monash Univ., Australia.
26.
Melchers, R. (1987). “Structural reliability assessment and human error.” Reliability and risk analysis in civil engineering, Proc. ICASP‐5, Inst. Risk Research, I, 46–54.
27.
Mirza, S. A., Hatzinikolas, M., and MacGregor, J. G. (1979). “Statistical descriptions of strength of concrete.” J. Struct. Div., ASCE, 105(6), 1021–1038.
28.
Mirza, S. A., and MacGregor, J. G. (1979a). “Variations in Dimensions of reinforced concrete members.” J. Struct. Div., ASCE, 105(4), 751–766.
29.
Mirza, S. A., and MacGregor, J. G. (1979b). “Variability of mechanical properties of reinforcing bars.” J. Struct. Div., ASCE, 105(5), 921–938.
30.
Nowak, A. S., and Carr, R. I. (1984). Classification of human errors. Dept. of Civ. Engrg., Univ. of Michigan, Ann Arbor, Mich.
31.
Nowak, A. S., and Carr, R. I. (1985). “Sensitivity analysis for structural errrors.” J. Struct. Engrg., ASCE, 111(8), 1734–1746.
32.
Nowak, A. S., ed. (1986). “Modeling human error in structural design and construction. Proc. Workshop, National Science Foundation, 1–229.
33.
O'Connor, J. M., and Ellingwood, B. (1987). “Reliability of nonlinear structures with seismic loading.” J. Struct. Engrg., ASCE, 113(5), 1011–1028.
34.
Prot, M. (1951). “Théorie probabiliste de la securité.” Rev. Gen. de Chem. de Fer.
35.
Pugsley, A. G. (1951). “Concepts of safety in structural engineering.” J. Inst. Civ. Engrg., 36(5).
36.
Pugsley, A. G. (1973). “The prediction of proneness to structural accidents.” Struct. Engr., 51(6), 195–196.
37.
Reese, R. C. (1973). “Structural failures from the human side.” Civ. Engrg., ASCE, 43(1), 81–84.
38.
Reid, W. (1844). “A short account of the failure of a part of the Brighton chain pier, in the gale of the 30th of November, 1836.” Prof. Papers of the Corps of Royal Engrs., 1.
39.
“Report on structural safety.” (1955). J. Inst. Struct. Engrg., 24(5), 141–149.
40.
Russell, J. S. (1841). “On the vibration of suspension bridges and other structures.” Trans. Royal Scottish Society of Arts, 1, 304.
41.
Shibata, H. (1985). “Role of human error to safety of critical structures—emphasized on earthquake failure.” Proc. ICOSSAR 3, II.
42.
Shibata, H. (1985). “Effect of human error for structural design under seismic loadings and its evaluation.” Proc. NSF Workshop on Civ. Engrg. Appl. of Fuzzy Sets, National Science Foundation, 45–63.
43.
Sibley, P. G., and Walker, A. C. (1977). “Structural accidents and their causes.” Proc. Inst. Civ. Engrs., 1(62), 191–208.
44.
Smith, D. W. (1976). “Bridge failures.” Proc., Inst. Civ. Engrs., I(60), 367–387.
45.
Smith, D. W. (1977). “Why do bridges fail?” Civ. Engrg., ASCE, 47(11), 58–62.
46.
Weaver, W. (1948). “Probability, rarity, interest and surprise.” The Scientific Monthly, 67(6).
Information & Authors
Information
Published In
Journal of Structural Engineering
Volume 114 • Issue 11 • November 1988
Pages: 2575 - 2593
Copyright
Copyright © 1988 ASCE.
History
Published online: Nov 1, 1988
Published in print: Nov 1988
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.