Angles in Eccentric Tension
Publication: Journal of Structural Engineering
Volume 114, Issue 10
Abstract
American, British, and Canadian specifications for the effective diameter of bolt hole, effective net area, and ultimate strength of bolted steel single angles connected by one leg and subjected to axial tension are reviewed. The load-carrying capacities computed according to AASHTO, AISC-LRFD, ASCE, BS 5950:1985 and CAN3-S16.1-M84 are compared with the available test data. It is concluded that: (1) In the case of unequal leg angles, consideration should be given as to whether the long leg is connected or long leg is out; (2) for certain combinations of end distance, edge distance, and pitch, block shear mode of failure may govern instead of net section failure; and (3) the specifications give unduly conservative values for ultimate strengths of angles if end connections are made by close tolerance bolts (fitted bolts).
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Code of practice for general steel construction. (1984). IS:800‐1984, Indian Standards Institution, New Delhi, India, 28–37.
2.
Gibson, G. J., and Wake, B. T. (1942). “An investigation of welded connections for angle tension members.” The Welding J., The J. of the Amer. Welding Soc., Welding Res. Supplement, 21(1), 44‐S–49‐S.
3.
Guide for design of steel transmission towers. (1987). Manual No. 52, Draft Revision, ASCE, Aug., 41–42.
4.
Kennedy, J. B., and Sinclair, G. R. (1969). “Ultimate capacity of single bolted angle connections.” J. Struct. Div., ASCE, 95(ST8), 1645–1660.
5.
Load and resistance factor design specification for structural steel buildings. (1986). Amer. Inst. of Steel Constr., Chicago, Ill., 29–36.
6.
McKibben, F. P. (1906). “Tension tests of steel angles.” Proc. Ninth Annual Meeting, Amer. Soc. for Testing Materials, Atlantic City, N.J., 267–274.
7.
McKibben, F. P. (1907). “Tension tests of steel angles with various types of end connections.” Proc., Tenth Annual Meeting, Amer. Soc. for Testing Materials, Atlantic City, N.J., 287–295.
8.
Mueller, W. H., and Wagner, A. L. (1985). “Plastic behaviour of steel angle columns.” Res. Rept., Bonneville Power Admin., Portland, Oreg., 33–82.
9.
Nelson, H. M. (1953). “Angles in tension.” Publication No. 7, British Constructional Steelwork Assoc., United Kingdom, 8–18.
10.
SAA steel structures code. (1981). AS 1250‐1981, Standards Assoc. of Australia, North Sydney, N.S.W., Australia, 11–30.
11.
Specification for the design, fabrication and erection of structural steel for buildings. (1978). Amer. Inst. of Steel Constr., Chicago, Ill., 41–42.
12.
Standard specifications for highway bridges. (1983). Thirteenth Ed., Amer. Assoc. of State Highway and Transp. Officials (AASHTO), Washington, D.C., 114–121.
13.
Steel structures for buildings (limit states design). (1984). CAN3‐S16.1‐M84, Canadian Standards Assoc., Rexdale, Ontario, Canada, 48.
14.
Structural use of steelwork in building, part 1. Code of practice for design in simple and continuous construction: Hot‐rolled sections. (1985). BS 5950: Part I, British Standards Inst., London, U.K., 15–55.
Information & Authors
Information
Published In
Copyright
Copyright © 1988 ASCE.
History
Published online: Oct 1, 1988
Published in print: Oct 1988
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.