Snow Load Factors For Lrfd
Publication: Journal of Structural Engineering
Volume 114, Issue 10
Abstract
Snow load factors are critically examined for use in load and resistance factor design (LRFD). Specifically examined are the effects on structural reliability of the change in the basic ground load to roof load conversion factor from 0.8 to 0.7 and recent statistical data concerning the conversion factor. Using the recent data on the groundload to roof‐load conversion factor, statistics are obtained for the one‐year and fifty‐year snow load. Based on these statistics, the reliability index is on the order of 1.6 when snow load controls the design. Increasing the snow load factor from 1.6 to 2.0 increases the reliability index to roughly 2.0. Also examined is the use of extreme value theory to model the 50‐year snow load. It is determined that a direct application of extreme value theory leads to inaccurate estimates of structural reliability.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ang, A. H‐S., and Tang, W. H. (1984). Probability concepts in engineering planning and design, Volume II: Decision, risk, and reliability. John Wiley and Sons, Inc., New York, N.Y.
2.
Benjamin, J. R., and Cornell, C. A. (1970). Probability statistics, and decision for civil engineers. McGraw‐Hill Book Co., New York, N.Y.
3.
“Building code requirements for minimum design loads in buildings and other structures.” (1972). American National Standard A58.1‐1972, American National Standards Institute, New York, N.Y.
4.
Ellingwood, B., etal. (1980). “Development of a probability based load criterion for American National Standard A58.” NBS Special Publication 577, U.S. Department of Commerce, Washington, D.C.
5.
Ellingwood, B., et al. (1982). “Probability based load criteria: load factors and load combinations.” J. Struct. Div., ASCE, 108(ST5), 978–997.
6.
Ellingwood, B., and O'Rourke, M. (1985). “Probabilistic Models of Snow Loads on Structures.” Structural Safety, 2(4), 291–299.
7.
Ellingwood, B., and Redfield, R. (1983). “Ground snow loads for structural design.” J. Struct. Engrg., ASCE, 109(4), 950–964.
8.
Galambos, T. V., et al. (1982). “Probability based load criteria: assessment of current design practice.” J. Struct. Div., ASCE, 108(ST5), 959–977.
9.
Gumbel, E. J. (1958). Statistics of extremes. Columbia University Press, New York, N.Y.
10.
Isyumov, N. (1978). “Roof snow loads: their variability and dependence on climatic conditions.” Structural use of wood in adverse environments, Van Nostrand Reinhold Company, Inc., New York, N.Y., 365–384.
11.
Load and resistance factor design specification for structural steel buildings. (1986). American Institute of Steel Construction, Chicago, Ill.
12.
Madsen, H. O. (1985). “First order vs. second order reliability analysis of series structures.” Struct. Safety, 2(3), 207–214.
13.
Minimum design loads for buildings and other structures. (1982). American National Standard A58.1‐1982, American National Standards Institute, New York, N.Y.
14.
O'Rourke, M. J., Speck, R. S., Jr., and Stiefel, U. (1985). “Drift snow loads on multilevel roofs.” J. Struct. Engrg., ASCE, 111(2), 290–306.
15.
O'Rourke, M. J., and Stiefel, U. (1983). “Roof snow loads for structural design.” J. Struct. Engineering, ASCE, 109(7), 1527–1537.
16.
O'Rourke, M., Tobiasson, W., and Wood, E. (1986). “Proposed code provisions for drifted snow loads.” J. Struct. Engrg., ASCE, 112(9), 2080–2092.
17.
Specifications for the design, fabrication and erection of structural steel for buildings. (1978). 8th Ed., American Institute of Steel Construction, Chicago, Ill.
18.
Templin, J. T., and Schriever, W. R. (1982). “Loads due to drifted snow.” J. Struct. Div., ASCE, 108(ST8), 1916–1925.
19.
Turkstra, C. J., and Putcha, C. S. (1985). “Safety index analysis for problems with large variances.” Structural safety and reliability, Proc., ICOSSAR '85, International Association for Structural Safety and Reliability, II‐511–II‐515.
Information & Authors
Information
Published In
Copyright
Copyright © 1988 ASCE.
History
Published online: Oct 1, 1988
Published in print: Oct 1988
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.