Evaluation of Compressive Strength of Masonry Walls by Limit Analysis
Publication: Journal of Structural Engineering
Volume 114, Issue 10
Abstract
The bearing capacity of a masonry element subjected to compression is generally determined by elastic calculations that take into account the different mechanical properties of the constituents. Compared to experimental checks, these estimates show a systematic error in the order of 50‐100%. This is due to the impossibility of defining unequivocally the values of the normal modulus of elasticity and of the transversal contraction coefficient (especially for mortar). These observations suggest that the problem should be approached from a totally different point of view, i.e., not confining the stress analysis to the elastic phase, but taking into account the inelastic phase preceding the rupture. In this work, an evaluation of the bearing capacity is carried out by superimposing a field of fundamental stresses that is balanced with the assigned compressive load, and plane fields that are balanced with null forces. This technique provides only the lower limit of the collapse load. The model reproduces closely the qualitative features of the rupture behavior of masonry described by experimental results available in the literature.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Atkinson, R. H., and Noland, J. L. (1983). “A proposed failure theory for brick masonry in compression.” Proc., 3rd Canadian Masonry Symp., Edmonton, Canada, Vol. 5, 1–17.
2.
de Coulomb, C. A. (1776). “Essai sur une application des règies de Maximis et Minimis quelques problèmes de Statique, relatif a l'Architecture.” Mem. Divers Savants Acad. Sci., Paris, France.
3.
Drysdale, R. G., and Wong, H. E. (1985). “Interpretation of the compressive strength of masonry prisms.” Proc., 7th Int. Brick Masonry Conf., Melbourne, Australia, 617–624.
4.
Francis, A. J., Horman, C. B., and Jerrems, L. E. (1971). “The effect of joint thickness and other factors on the compressive strength of brickwork.” Proc., Second Int. Brick Masonry Conference, 31–37.
5.
Haller, P. (1960). “The physics of the fired brick: Part one—strength properties.” Libr. Commun. Bldg. Res. Stn, 929.
6.
Hendry, A. W. (1981). Structural brickwork. The Macmillan Press Ltd., Hong Kong.
7.
Hilsdorf, H. K. (1969). “Investigation into the failure mechanism of brick masonry loaded on axial compression.” Proc., Int. Conf. on Masonry Structural Systems, Austin, Tex., 34–41.
8.
Kupfer, H., Hilsdorf, H. K., and Rusch, H. (1969). “Behavior of concrete under biaxial stresses.” ACI J., 66(3), 65–87.
9.
Lenczner, D. (1972). Elements of load bearing brickwork. Pergamon Press, Oxford, U.K.
10.
McNary, W. S., and Abrams, D. P. (1985). “Mechanics of masonry in compression.” J. Struct. Engrg., ASCE, 111(4), 857–870.
11.
Page, A. W. (1981). “The biaxial compressive strength of brick masonry.” Proc. Inst. Civ. Engrs., London, U.K., Part 2, Vol. 71, 893–906.
12.
Sparacio, R. (1983). “Calcclo delle costruzioni in muratura.” Il consolidamento delle costruzioni, G. Del Piero, ed., CISM, Udine, Italy, 277‐312 (in Italian).
13.
Stassi D'Alia, F. (1967). “Flow and fracture of materials according to a new limiting condition of yielding.” Meccanica, 2(3), 178–195.
Information & Authors
Information
Published In
Copyright
Copyright © 1988 ASCE.
History
Published online: Oct 1, 1988
Published in print: Oct 1988
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.