Viscoelastic Sandwich Plates with Crossply Faces
Publication: Journal of Structural Engineering
Volume 114, Issue 1
Abstract
An energy method has been used for an elastic formulation of buckling analysis of a simply supported sandwich plate with crossply faces, including the interlayer shear deformation of adhesive layers and the transverse normal and shear deformations of the core. A quasielastic method is used for the solution of viscoelastic analysis of the sandwich plate. Results of the viscoelastic buckling analysis under in‐plane loads are presented for various lay‐up sequences of face plates. Dependence of buckling load on face lay‐up sequence, adhesive bonding stiffness, load ratio, and plate geometry is examined, including the effect of change of buckling modes.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Althof, W. (1982). “Creep, recovery and relaxation of shear‐loaded adhesive bondlines.” J. Reinforced Plastics and Composites, 1(1), 29–39.
2.
Ashton, J. E., and Whitney, J. M. (1970). Theory of laminated plates. Technomic Publishing Co., Stanford, Conn.
3.
Fazio, P., and Hussein, R. (1982). “Sandwich beam‐coiurnn with interiayer slips.” J. Engrg. Mech., ASCE, 108(2), 354–366.
4.
Goodman, J. R., and Popov, E. P. (1968). “Layered beam systems with interiayer slip.” J. Struct. Engrg., ASCE, 94(11), 2535–2547.
5.
Hussein, R. (1984). “Sandwich plates with interiayer slip.” J. Engrg. Mech., ASCE, 110(4), 493–506.
6.
Pearce, P. R. A., and Webber, J. P. H. (1972). “Buckling of sandwich panels with laminated face plates.” Aero. Quart. 23(2), 146–160.
7.
Rao, K. M. (1985). “Buckling analysis of anisotropic sandwich plates faced with fiber reinforced plastics.” AIAA J. 23(8), 1247–1253.
8.
Schapery, R. A. (1974). “Viscoelastic behavior and analysis of composite materials.” Composite materials, L. J. Broutman and R. H. Krock, eds. Vol. 2, Academic Press, New York, N.Y., 115–119.
9.
Wilson, D. W., and Vinson, J. R. (1984). “Viscoelastic analysis of laminated plate buckling.” AIAA J. 22(7), 982–988.
Information & Authors
Information
Published In
Journal of Structural Engineering
Volume 114 • Issue 1 • January 1988
Pages: 150 - 164
Copyright
Copyright © 1988 ASCE.
History
Published online: Jan 1, 1988
Published in print: Jan 1988
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.