ACI Stability Resistance Factor for RC Columns
Publication: Journal of Structural Engineering
Volume 113, Issue 9
Abstract
Load and resistance factors are used to reduce the probability of overloading, understrength, or both to acceptable levels. The ACI Building Code specifies the use of resistance factors for beam‐columns in the following ways: (1) Resistance factors are applied to cross‐section strength; and (2) resistance factors are applied to critical buckling strength used in moment magnification due to slenderness effects. Probabilistic examination of ACI resistance factors as used in (1) was reported in an earlier study and is available in the literature. This paper examines the ACI resistance factors as employed in (2) and suggests a value for design office use for computing moment magnification of concrete slender columns.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
“American National Standard Minimum Design Loads for Buildings and Other Structures,” ANSI A58.1‐1982, American National Standards Institute, New York, N.Y., 1982.
2.
“Building Code Requirements for Reinforced Concrete,” ACI 318‐63, American Concrete Institute, Detroit, Mich., 1963.
3.
“Building Code Requirements for Reinforced Concrete,” ACI 318‐71, American Concrete Institute, Detroit, Mich., 1971.
4.
“Building Code Requirements for Reinforced Concrete,” ACI 318‐77, American Concrete Institute, Detroit, Mich., 1977.
5.
“Building Code Requirements for Reinforced Concrete,” ACI 318‐83, American Concrete Institute, Detroit, Mich., 1983.
6.
Grant, L. H., Mirza, S. A., and MacGregor, J. G., “Monte Carlo Study of Strength of Concrete Columns,” American Concrete Institute Journal, Vol. 75, No. 8, Aug., 1978, pp. 348–358.
7.
MacGregor, J. G., “Load and Resistance Factors for Concrete Design,” American Concrete Institute Journal, Vol. 80, No. 4, Jul.–Aug., 1983, pp. 279–287.
8.
Mirza, S. A., “Resistance Factors for Concrete Design Using ACI 318‐83,” International Journal of Structures, Vol. 5, No. 1, Jan., 1985, pp. 1–22.
9.
Mirza, S. A., and MacGregor, J. G., “Probabilistic Study of Strength of Reinforced Concrete Members,” Canadian Journal of Civil Engineering, Vol. 9, No. 3, Sep., 1982, pp. 431–448.
10.
Nowak, A. S., and Curtis, J. D., “Risk Analysis Computer Program,” Report UMEE 80R2, Department of Civil Engineering, The University of Michigan, Ann Arbor, Mich., 1980.
Information & Authors
Information
Published In
Copyright
Copyright © 1987 ASCE.
History
Published online: Sep 1, 1987
Published in print: Sep 1987
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.