Crack Gages for Detecting Fatigue Crack Initiation
Publication: Journal of Structural Engineering
Volume 113, Issue 7
Abstract
The use of fatigue crack gages is examined, in order to provide a clear indication of fatigue crack initiation and early subcritical crack growth in structural steel details. The crack gage consists of a thin steel coupon that can be bonded to a structural member in the vicinity of a known stress raiser, such as at the end of a cover plate or near a stiffener. The crack gage concept has traditionally been used to correlate fatigue crack growth in the gage to crack growth in the structure. The present emphasis, however, is to use the crack gage to detect the onset of fatigue crack growth. The geometry of the crack gage is designed such that either initiation or significant crack propagation in the gage provides a direct indication that the structural element has developed a detectable fatigue crack.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ashbaugh, N. E., and Grandt, A. F., Jr., “Evaluation of a Crack‐Growth Gage for Monitoring Possible Structural Fatigue‐Crack Growth,” Service Fatigue Loads Monitoring, Simulation, and Analysis, ASTM STP 671, American Society for Testing and Materials, 1979, pp. 94–117.
2.
Crews, J. H., “Crack Initiation at Stress Concentrations as Influenced by Prior Local Plasticity,” Achievements of High Fatigue Resistance in Metals and Alloys, ASTM STP 467, American Society for Testing and Materials, 1970, pp. 37–52.
3.
Crews, J. H., and Hardrath, H. F., “A Study of Cyclic Plastic Stresses at a Notch Root,” Experimental Mechanics, Vol. 6, No. 6, Jun., 1966, pp. 313–320.
4.
Dumanis‐Modan, A., “Evaluation of the Crack Gage as an Advanced Individual Aircraft Tracking Concept,” thesis submitted to Purdue University, at West Lafayette, Ind., in 1982, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
5.
“Fatigue Reliability: Quality Assurance and Maintainability,” Committee on Fatigue and Fracture Reliability, Journal of the Structural Division, ASCE, Vol. 108, No. ST1, Jan., 1982, pp. 25–46.
6.
Gallagher, J. P., Grandt, A. F., Jr., and Crane, R. L., “Tracking Potential Crack Growth Damage in U.S. Air Force Aircraft,” Journal of Aircraft, Vol. 15, No. 7, Jul., 1978, pp. 435–442.
7.
Grandt, A. F., Jr., Crane, R. L., and Gallagher, J. P., “A Crack Growth Gage for Assessing Flaw Growth Potential in Structural Components,” Fracture 77, Proceedings of the 4th International Conference on Fracture, Vol. 3, University of Waterloo Press, Waterloo, Canada, 1977, pp. 39–45.
8.
Gray, T. D., and Grandt, A. F., “An Evaluation of the Crack Gage Technique for Individual Aircraft Tracking,” Case Studies on Structural Integrity and Reliability, Proceedings of the Army Symposium on Solid Mechanics, AMMRC MS 78‐3, Army Materials and Mechanics Research Center, Sep., 1987, pp. 63–82.
9.
Gurney, T. R., “Finite Element Analyses of Some Joints with the Welds Transverse to the Direction of Stress,” Yielding Research Abroad, Vol. 22, No. 10, Dec., 1976, pp. 3–27.
10.
Impellizeri, L. F., “Cumulative Damage Analysis in Structural Fatigue,” Effect of Environment and Complex Load History on Fatigue Life, ASTM STP 462, American Society for Testing and Materials, 1970, pp. 40–68.
11.
Johnson, W. S., and Paquette, W. J., “Design and Evaluation of a Cracked Gage Concept for Monitoring Potential Crack Growth in Fleet Aircraft,” Research Report No. EER‐FW‐1831, General Dynamics, Fort Worth Division, Tex., Jul., 1977, 41 pp.
12.
Landgraf, R. W., Morrow, J., and Endo, T., “Determination of the Cyclic Stress‐Strain Curve,” Journal of Materials, JMSLA, Vol. 4, No. 1, Mar., 1969, pp. 176–188.
13.
Manson, S. S., and Hirschberg, M. H., “Low Cycle Fatigue of Notched Specimens by Consideration of Crack Initiation and Propagation,” National Aeronautics and Space Administration, NASA TN D‐3146, 1965.
14.
“Manual for Maintenance Inspection of Bridges,” American Association of State Highway and Transportation Officials, Highway Subcommittee on Bridges and Structures, 1983, 50 pp.
15.
Mattos, R. J., and Lawrence, F. V., “Estimation of the Fatigue Crack Initiation Life in Welds Using Low Cycle Fatigue Concepts,” Fracture Control Program Report No. 19, College of Engineering, University of Illinois, Urbana‐Champaign, Ill., Oct., 1975, 189 pp.
16.
Neuber, H., “Theory of Stress Concentration for Shear Strained Prismatical Bodies with Arbitrary Non‐Linear Stress‐Strain Law,” Journal of Applied Mechanics, Vol. 28, No. 4, Dec., 1961, pp. 544–550.
17.
Ori, J. A., and Grandt, A. F., Jr., “Single‐Edge‐Cracked Growth Gage,” Fracture Mechanics, ASTM STP 677, American Society for Testing and Materials, 1979, pp. 533–549.
18.
Paris, P. C., and Erdogan, F., “A Critical Analysis of Crack Propagation Law,” Journal of Basic Engineering, Vol. 85, No. 4, 1963, pp. 528–534.
19.
Paris, P. C., Gomez, M. P., and Anderson, W. E., “A Rational Analytic Theory of Fatigue,” The Trend in Engineering, Vol. 13, No. 1, University of Washington, Seattle, Wash., Jan., 1961, pp. 9–14.
20.
Peterson, R. E., “Notch Sensitivity,” Metal Fatigue, Sines and Waisman, Eds., McGraw‐Hill Book Co., Inc., New York, N.Y., 1959, 415 pp.
21.
Peterson, R. E., “Fatigue of Metals‐Engineering and Design Aspects,” Materials Research and Standards, Vol. 3, No. 2, Feb., 1963, pp. 122–139.
22.
Raske, D. T., and Morrow, J., “Mechanics of Materials in Low Cycle Fatigue Testing,” Manual on Low Cycle Fatigue Testing, ASTM STP 465, 1969, pp. 1–26.
23.
Smith, H. W., Fatigue Damage Indicator, U.S. Patent No. 3,979,949, assigned to the Boeing Company, Seattle, Wash., Sep., 1976.
24.
Tobe, Y., and Lawrence, F. V., “Effect of Inadequate Joint Penetration on Fatigue Resistance of High Strength Structural Steel Welds,” Welding Journal, Vol. 56, No. 9, Sep., 1977, pp. 259s–266s.
25.
Topper, T. H., and Morrow, J., “Simulation of the Fatigue Behavior at the Notch Root in Spectrum Loaded Members (U),” TAM Report No. 333, Department of Theoretical and Applied Mechanics, University of Illinois, Urbana‐Champaign, Ill., Jan., 1970.
26.
Topper, T. H., Wetzel, R. M., and Morrow, J., “Neuber's Rule Applied to Fatigue of Notched Specimens,” Journal of Materials, Vol. 4, No. 1, Mar., 1969, pp. 200–209.
27.
Torvik, P. J., “On the Determination of Stresses, Displacements, and Stress‐Intensity Factors in Edge‐Cracked Sheets with Mixed Boundary Conditions,” Journal of Applied Mechanics, Vol. 46, Sep., 1979, pp. 611–617.
Information & Authors
Information
Published In
Copyright
Copyright © 1987 ASCE.
History
Published online: Jul 1, 1987
Published in print: Jul 1987
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.