Steel Mechanical Properties at Different Strain Rates
Publication: Journal of Structural Engineering
Volume 113, Issue 4
Abstract
Dynamic test results reported by different investigators on structural steel, deformed reinforcing bars, and deformed wires subjected to monotonic tension are used for deriving empirical expressions for the ratios of static to dynamic values of the yield and ultimate stresses, yield and ultimate strains, and the strain at the end of the yield plateau. The principal variables in the expressions are the rate of straining and the steel static yield strength. These expressions are then used for developing dynamic constitutive models for monotonically loaded steel.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bažant, P. Z., and Bhat, P. P., “Prediction of Hysteresis of R/C Members,” Journal of the Structural Division, ASCE, Vol. 103, No. ST1, Jan., 1977, pp. 153–167.
2.
Cowell, W. C., “Dynamic Tests of Concrete Reinforcing Steel,” Technical Report R394, U.S. Naval Civil Engineering Laboratory, Port Hueneme, Calif., Sept., 1965.
3.
Filippou, F. C., Popov, E. P., and Bertero, V. V., “Effect of Bond Deterioration on Hysteretic Behavior of R/C Joints,” Report No. UCB/CERC‐83/19, Earthquake Engineering Research Center, University of California, Berkeley, Calif., Aug., 1983.
4.
Mahin, S. A., and Bertero, V. V., “Rate of Loading Effects on Uncracked and Repaired Reinforced Concrete Members,” Report No. UCB/CERC‐72/9, Earthquake Engineering Research Center, University of California, Berkeley, Calif., Dec., 1972.
5.
Meregotto, M., and Pinto, P., “Method of Analysis for Cyclically Loaded Reinforced Concrete Plane Frames Including Changes in Geometry and Nonelastic Behavior of Elements under Combined Normal Force and Bending,” Proceedings of the Symposium on Resistance and Ultimate Deformability of Structures Acted on by Well‐Defined Repeated Loads, IABSE, Lisbon, Portugal, 1973.
6.
Norris, C. H., et al., Structural Design for Dynamic Loads, McGraw‐Hill Book Company, Inc., New York, N.Y., 1959.
7.
Seabold, R. H., “Dynamic Shear Strength of Reinforced Concrete Beams—Part II,” Technical Report R‐502, U.S. Naval Civil Engineering Laboratory, Port Hueneme, Calif., Jan., 1967.
8.
Seabold, R. H., “Dynamic Shear Strength of Reinforced Concrete Beams—Part III,” Technical Report R‐695, U.S. Naval Civil Engineering Laboratory, Port Hueneme, Calif., Sept., 1970.
9.
Staffier, S. R., and Sozen, M. A., “Effect of Strain Rate on Yield Stress of Model Reinforcement,” Structural Research Series No. 415, Civil Engineering Studies, University of Illinois, Urbana, Ill., Feb., 1975.
10.
Winlock, J., “The Influence of the Rate of Deformation on the Tensile Properties of Some Plain Carbon Sheet Steels,” Journal of Metals, AIME, Vol. 197, June, 1953, pp. 797–803.
11.
Wood, D. S., “Rapid Loading Tests on Three Grades of Reinforcing Steel,” Report under Contract Noy‐90922 with NCEL, May, 1956.
Information & Authors
Information
Published In
Copyright
Copyright © 1987 ASCE.
History
Published online: Apr 1, 1987
Published in print: Apr 1987
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.