Design of a Triangular Cross‐Section Bridge Truss
Publication: Journal of Structural Engineering
Volume 113, Issue 12
Abstract
The structural advantages and aesthetics of a triangular cross‐section truss have long been recognized by structural engineers and architects alike. Until recently, however, it has not been considered cost‐effective to design and build this system over the traditional rectangular or two‐dimensional truss to carry heavy loadings. But with recent advances in welding techniques, the use of computer analysis methods, and the increased availability of structural tubing for truss members, the triangular cross‐section truss has seen a wide range of new applications. This paper discusses the analysis and design of this type of truss to carry highway loadings. The structural analysis program TRUSS1 by the writer, is used for the analysis and design of various truss configurations. Several primary bracing, sway bracing, and truss depth configurations are investigated, and final selection for design is based on least weight criteria. The final design conforms to the current American Association df State Highway and Transportation Officials (AASHTO) bridge specifications. The design deals with member selection considering buckling and stress constraints, joint design, and deflection criteria.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
American Association of State Highway and Transportation Officials. (1985). Standard specifications for highway bridges. 13th ed., Association General Offices, Washington, D.C.
2.
American Association of State Highway and Transportation Officials. (1985). Interim specifications—bridges. Association General Offices, Washington, D.C.
3.
American Institute of Steel Construction. (1980). Manual of steel construction. 8th ed., Institute General Offices, Chicago, Ill.
4.
American Iron and Steel Institute Committee of Steel Pipe Producers. (1974). Design manual for structural tubing and pipe. Institute General Offices, New York, N.Y.
5.
American Welding Society. (1984). Structural welding code—steel, ANSI/AWS D1.1‐84. 8th ed., Society General Offices, Miami, Fla.
6.
Blodgett, O. W. (1966). Design of welded structures. James F. Lincoln Arc Welding Foundation. Cleveland, Ohio.
7.
Blodgett, O. W. (1982). “New AWS code specifies the design of tubular structures.” No. D413, Lincoln Electric Company.
8.
British Steel Corporation, Tubes Division. (1977). RHS guide to fabrication and design. Corporation Sales Office, Corby, England.
9.
Durfee, R. H. (1986). “Review of triangular cross section truss systems.” J. Struct. Engrg., ASCE, 112(5), 1088–1096.
10.
Graham, R. R. (1965). “Manufacture and use of structural tubing.” J. Met., AIME, 17(9), 975–980.
11.
Kirsch, U. (1981). Optimum structural design. McGraw‐Hill Book Co., New York, N.Y.
12.
Kuzmanovic, B. O., Willems, N., and Thomas, F. M. (1977). “Automated design of three‐legged steel transmission towers.” Computers & Structures, 7(2), 171–175.
13.
“Lattice towers have low visual impact.” 1971). Electrical World, Feb. 1, 56–58.
14.
McCormack, J. C. (1971). Structural steel design. 2nd ed., International Textbook Co., New York, N.Y.
15.
Sherman, D. R. (1976). Tentative criteria for structural applications of steel tubing and pipe. American Iron and Steel Institute, New York, N.Y.
16.
Stelco, Inc. (1981). Hollow structural sections design manual for connections. 2nd ed., Stelco General Offices, Toronto, Ontario, Canada.
17.
U.S. Steel Corporation (1973). Highway structures design handbook. U.S. Steel Corporation, Pittsburgh, Pa.
18.
Welded Steel Tube Institute. (1974). Manual of cold formed welded structural steel tubing. Institute Structural Tube Division, Cleveland, Ohio.
19.
“Wind Effects—A synopsis of CIDECT research.” (1981). CIDECT, 5, 2–5.
Information & Authors
Information
Published In
Journal of Structural Engineering
Volume 113 • Issue 12 • December 1987
Pages: 2399 - 2414
Copyright
Copyright © 1987 ASCE.
History
Published online: Dec 1, 1987
Published in print: Dec 1987
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.