Torsional Strength of R/C Beams Containing Rectangular Openings
Publication: Journal of Structural Engineering
Volume 113, Issue 11
Abstract
A method for predicting the torsional strength of a reinforced concrete beam containing a rectangular opening is developed using the principles of limit analysis. A simple yield criterion for yielding under combined bending and torsion is employed. The applicability of the method is limited to openings in which the chords are subjected to predominant bending and torsion, while the shear force at collapse is less than 2/3 of the ultimate shear force. Such openings are characteristically long, and a suitable length parameter to use is the ratio of ultimate bending moment to ultimate shear force of chords. The proposed method is easier to apply than other available methods because it requires only some hand calculations beyond the computation of ultimate values of bending moment, torsion, and shear force of the chords using standard methods. Comparison with available test results shows that the proposed method provides consistently good predictions.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
“Building code requirements for reinforced concrete.” (1983). ACI 318‐83, American Concrete Institute, Detroit, Mich.
2.
Daniel, H. R., and McMullen, A. E. (1977). “Torsion in concrete beams containing an opening.” J. Struct. Div., ASCE, 103(ST3), 607–617.
3.
Elfgren, L., Karlson, I., and Losberg, A. (1974). “Torsion‐bending‐shear interaction for concrete beams.” J. Struct. Div., ASCE, 100(ST8), 1657–1676.
4.
Hsu, T. (1984). Torsion of Reinforced Concrete. Van Nostrand Reinhold Inc., New York, N.Y.
5.
Lampert, P. (1972). “Bruchwiderstand von stahlbetonbalken unter torsion und biegung.” Berich No. 26, Institut fur Baustatik, ETH Zurich, Switzerland.
6.
Lampert, P., and Collins, M. P. (1972). “Torsion, bending and confusion‐an attempt to establish the facts.” ACI J., 69(8), 500–504.
7.
Mansur, M. A., and Hasnat, A. (1979). “Concrete beams with small openings under torsion.” J. Struct. Div., ASCE, 105(ST11), 2433–2447.
8.
Mansur, M. A., Ting, S. K., and Lee, S. L. (1983a). “Torsion tests of R/C beams with large openings.” J. Struct. Engrg., ASCE, 109(8), 1780–1791.
9.
Mansur, M. A., Ting, S. K., and Lee, S. L. (1983b). “Ultimate torque of R/C beams with large openings.” J. Struct. Engrg., ASCE, 109(8), 1887–1902.
10.
McMullen, A. E., and Daniel, H. R. (1975). “Torsional strength of longitudinally reinforced beams containing an opening.” ACI J., 72(8), 415–420.
11.
Thurlimann, B. (1979). “Torsional strength of reinforced and prestressed concrete beams—CEB Approach.” Concrete Design: U.S. and European Practices, ACI special publication SP‐59, American Concrete Institute, Detroit, Mich., 117–143.
Information & Authors
Information
Published In
Copyright
Copyright © 1987 ASCE.
History
Published online: Nov 1, 1987
Published in print: Nov 1987
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.