RC Rectangular Slabs with Edge Restraints
Publication: Journal of Structural Engineering
Volume 113, Issue 11
Abstract
Reinforced concrete slabs with edges restrained against lateral displacement are capable of carrying ultimate loads which are considerably higher than the loads predicted by using conventional yield‐line theory. An analytical relation for the load‐deflection behavior is derived in the paper by using a plastic‐flow theory. The compatibility condition introduced in the paper for the deformation of the centerline of the slab incorporates boundary displacements as well as the in‐plane deformations of the slab. Combining the compatibility condition, the flow rule associated with the load‐moment yield criterion, and the axial equilibrium condition, a nonlinear differential equation is obtained for the membrane force in the slab. The load on the slab is then calculated for a given deflection by balancing the external and internal energy dissipation. The predicted load‐deflection curves are compared with those obtained from two test series and a good agreement is obtained up to the peak load. The load‐deflection curve beyond the peak load is found to be predicted better by the incorporation of an analysis which approximates strain softening of the concrete.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Braestrup, M. W. (1980). “Dome effect in RC slabs: Rigid‐plastic analysis.” J. Struct. Div., ASCE, 106(6), 1237–1254.
2.
Braestrup, M. W., and Morley, C. T. (1980). “Dome effect in RC slabs: elastic‐plastic analysis,” J. Struct. Div., ASCE, 106(6), 1255–1262.
3.
Brotchie, J. F., and Holley, M. J. (1971). “Membrane action in slabs.” Cracking, Deflection, and Ultimate Load of Concrete Slab Systems, ACI Publication, SP‐30, 345–377.
4.
Building code requirements for reinforced concrete. (1983). American Concrete Institute, Detroit, Mich.
5.
Christiansen, K. P., and Frederiksen, T. (1983). “Experimental investigation of rectangular concrete slabs with horizontal restraints.” Materials and Structures, 16(93), 179–192.
6.
Datta, T. K., and Ramesh, C. K. (1975). “Some experimental studies on a reinforced concrete slab‐beam system.” Magazine of Concrete Research, London, England, 27, 111–120.
7.
Desayi, P., and Kulkami, A. B. (1977). “Load‐deflection behaviour of restrained reinforced‐concrete slabs,” J. Struct. Div., ASCE, 103(2), 303–312.
8.
Gvozdev, A. A. (1960). “The determination of the value of the collapse load for statically indeterminate systems undergoing plastic deformation.” Int. J. of Mech. Sci., 1, 322–335.
9.
Hung, T. Y., and Nawy, E. G. (1971). “Limit strength and serviceability factor in uniformly loaded, isotropically reinforced two‐way slabs.” Cracking, Deflection and Ultimate Load of Concrete Slab Systems, ACI Publication, SP‐30, 301–324.
10.
Janas, M. (1968). “Large plastic deformation of reinforced concrete slabs.” Int. J. of Solids and Struct, 4, 61–74.
11.
Johansen, K. W. (1943). Brudlinieteorier, Copenhagen, Denmark; English edition, 1962, Yield‐line theory, Cement and Concrete Association, London, England.
12.
Kemp, K. O. (1967). “Yield of a square reinforced slab on simple supports allowing for membrane forces.” The Struct Engr. London, England, 45, 235–240.
13.
Morley, C. T. (1967). “Yield line theory for reinforced concrete slabs at moderately large deflection.” Magazine of Concrete Research, London, England, 19, 211–222.
14.
Park, R. (1964). “Ultimate strength of rectangular slabs under short‐term uniform loading with edges restrained against lateral movement.” Proc. of the Inst. of Civ. Engrs., London, England, 28, 125–150.
15.
Park, R., and Pauley, T. (1975). Reinforced concrete structures, John Wiley & Sons, Inc., New York, N.Y.
16.
Sawczuk, A., and Winnicki, L. (1965). “ Plastic behaviour of simply‐supported reinforced concrete plates at moderately large deflections.” Int. J. Solids and Struct., 1, 97–111.
Information & Authors
Information
Published In
Copyright
Copyright © 1987 ASCE.
History
Published online: Nov 1, 1987
Published in print: Nov 1987
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.