Energy Dissipation in RC Beams Under Cyclic Load
Publication: Journal of Structural Engineering
Volume 112, Issue 8
Abstract
The development and application of an “energy dissipation index” to characterize reinforced concrete beams under cyclic load is described. The index is designed to provide an objective measure of the response of beams with different geometries and reinforcement ratios subjected to severe cyclic loading. The effects of flexural reinforcement, transverse reinforcement, concrete strength, and load history are considered. The index is used to evaluate the results of five major experimental investigations. The energy dissipation index may be applied to both research and design. The analysis of the experimental work shows that to improve the cyclic performance of reinforced concrete beams, it is more efficient to decrease the shear stress, by increasing the beam width, than to increase the transverse reinforcement. The analysis also indicates that increasing the ratio of positive to negative reinforcement may not markedly improve the cyclic performance of a beam. Recommendations are made for the design of reinforced concrete beams that may be subjected to severe cyclic loading.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
ACI Committee 318, “Building Code Requirements for Reinforced Concrete (ACI 318‐83),” American Concrete Institute, Detroit, Mich., 1983, 111 pp.
2.
ACI‐ASCE Committee 426, “The Shear Strength of Reinforced Concrete Members,” Journal of the Structural Division, ASCE, No. ST6, June, 1973, pp. 1091–1176.
3.
Bertero, V. V., Popov, E. P., and Wang, T. Y., “Hysteretic Behavior of Reinforced Concrete Flexural Members with High Shear,” Report No. EERC 74‐9, Earthquake Engineering Research Center, Univ. of California, Berkeley, Calif., Aug., 1972, 126 pp.
4.
Bertero, V. V., and Popov, E. P., “Seismic Behavior of Ductile Moment‐Resisting Reinforced Concrete Frames,” Reinforced Concrete Structures in Seismic Zones, Publ. SP‐53, American Concrete Institute, Detroit, Mich., 1977, pp. 247–291.
5.
Bresler, B., and Scordelis, A. C., “Shear Strength of Reinforced Concrete Beams,” Journal of the American Concrete Institute, Vol. 60, No. 1, Jan., 1963, pp. 51–74.
6.
Brown, R. H., and Jirsa, J. O., “Reinforced Concrete Beams under Load Reversals,” Journal of the American Concrete Institute, Vol. 68, No. 5, May, 1971, pp. 380–390.
7.
Draper, N. R., and Smith, H., Applied Regression Analysis, 2nd ed., John Wiley & Sons, Inc., New York, N.Y., 1981, pp. 241–249.
8.
Gosain, N. K., Brown, R. H., and Jirsa, J. O., “Shear Requirements for Load Reversals on RC Members,” Journal of the Structural Division, ASCE, Vol. 103, No. ST7, July, 1977, pp. 1461–1476.
9.
Hwang, T. H., and Scribner, C. F., “R/C Member Cyclic Responses during Various Loadings,” Journal of Structural Engineering, ASCE, Vol. 110, No. 3, Mar., 1984, pp. 477–489.
10.
Lee, D. L. N., Wight, J. K., and Hanson, R. D., “RC Beam‐Column Joints under Large Load Reversals,” Journal of the Structural Division, ASCE, Vol. 103, No. ST12, Dec., 1977, pp. 2337–2350.
11.
Ma, S. M., Bertero, V. V., and Popov, E. P., “Experimental and Analytical Studies on the Hysteretic Behavior of Reinforced Concrete Rectangular and T‐Beams,” Report No. EERC 76‐2, Earthquake Engineering Research Center, Univ. of California, Berkeley, Calif., May, 1976, 254 pp.
12.
Nmai, C. K., and Darwin, D., “Cyclic Behavior of Lightly Reinforced Concrete Beams,” Structural Engineering and Engineering Materials SM Report No. 12, Univ. of Kansas Center for Research, Inc., Lawrence, Kans., June, 1984, 129 pp.
13.
Park, R., Kent, D. C., and Sampson, R. A., “Reinforced Concrete Members with Cyclic Loading,” Journal of the Structural Division, ASCE, Vol. 98, No. ST7, July, 1972, pp. 1341–1360.
14.
Paulay, T., “Simulated Seismic Loading of Spandrel Beams,” Journal of the Structural Division, ASCE, Vol. 97, No. ST9, Sept., 1971, pp. 2407–2419.
15.
Popov, E. P., Bertero, V. V., and Krawinkler, H., “Cyclic Behavior of Three Reinforced Concrete Flexural Members with High Shear,” Report No. EERC 72‐5, Earthquake Engineering Research Center, Univ. of California, Berkeley, Calif., Oct., 1972, 78 pp.
16.
Scribner, C. F., and Wight, J. K., “Strength Decay in Reinforced Concrete Beams under Load Reversals,” Journal of the Structural Division, ASCE, Vol. 106, No. ST4, Apr., 1980, pp. 861–875.
17.
Uniform Building Code, International Conference of Building Officials, Whittier, Calif., 1985, 817 pp.
18.
Wight, J. K., and Sozen, M. A., “Strength Decay of RC Columns under Shear Reversals,” Journal of the Structural Division, ASCE, Vol. 101, No. ST5, May, 1975, pp. 1053–1065.
Information & Authors
Information
Published In
Copyright
Copyright © 1986 ASCE.
History
Published online: Aug 1, 1986
Published in print: Aug 1986
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.