Buckling of Tapered Bars Under Stepped Axial Loads
Publication: Journal of Structural Engineering
Volume 112, Issue 6
Abstract
Tapered bars, axially compressed by concentrated loads applied at various locations along their axes, are discussed. The most common cases of support conditions are considered. The law of stiffness variation chosen covers mainly members of steel structures. Buckling equations of these bars are formulated and corresponding critical loads are evaluated. The results are also presented in graphic form, from which several interesting conclusions are obtained concerning the optimum design and the expediency of using tapered bars as compressive members in structures.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bleich, F., Buckling Strength of Metal Structures, McGraw‐Hill Book Co., Inc., New York, N.Y., 1952.
2.
Dinnik, A. N., “Design of Columns of Varying Cross Section,” Translated from Russian by M. Majetz, Transactions, ASME, Vols. 51–52, 1929 and 1932.
3.
Ermopoulos, J. C., and Kounadis, A. N., “Buckling Analysis of Simple Frames with Varying Built‐Up Sections,” Proceedings, Conference on Mechanics, organized by H.S.T.A.M., Athens, Greece, Sept., 1983.
4.
Ermopoulos, J. C., and Kounadis, A. N., “Stability of Frames with Tapered Built‐Up Members,” Journal of Structural Engineering, ASCE, Vol. 111, No. ST9, Sept., 1985, pp. 1979–1992.
5.
Ermopoulos, J. C., “Elastic Stability Analysis of Plane Rectangular Frames with Varying Stiffness Members,” thesis presented to the National Technical University of Athens, at Athens, Greece, in 1984, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
6.
Galea, Y., “Flambement des Poteaux a Inertie Variable,” Construction Metallique, No. 1, 1981.
7.
Gere, J. M., and Carter, W. O., “Critical Buckling Loads for Tapered Columns,” Journal of the Structural Division, ASCE, Vol. 88, No. ST1, Feb., 1962, pp. 1–11.
8.
Girijavallabhan, C. V., “Buckling Loads of Nonuniform Columns,” Journal of the Structural Division, ASCE, Vol. 95, No. ST11, Nov., 1969, pp. 2419–2431.
9.
Harris, C. O., “Suggestions for Columns of Varying Sections,” Journal of Aeronautic Science, Vol. 9, 1942, p. 97.
10.
Harvey, J. W., “Buckling Loads for Stepped Columns,” Journal of the Structural Division, ASCE, Vol. 90, No. ST2, Apr., 1964, pp. 201–221.
11.
Just, D. J., “Plane Frameworks of Tapering Box and I‐Section,” Journal of the Structural Division, ASCE, Vol. 103, No. ST1, Jan., 1977, pp. 71–86.
12.
Karabalis, D. L., and Beskos, D. E., “Static, Dynamic and Stability Analysis of Structures Composed of Tapered Beams,” Computers and Structures, Vol. 16, No. 6, 1983, pp. 731–748.
13.
Kounadis, A. N., “Beam‐Columns of Varying Cross Section under Lateral Harmonic Loads,” Ingenieur‐Archiv, Vol. 44, 1975, pp. 43–51.
14.
Kounadis, A. N., and Ermopoulos, J. C., “Postbuckling Analysis of a Simple Frame with Varying Stiffness,” Acta Mechanica, Vol. 54, 1984, pp. 95–105.
15.
Krynicki, E. J., and Mazurkiewicz, Z. E., “Frames of Solid Bars of Varying Cross Sections,” Journal of the Structural Division, ASCE, Vol. 90, No. ST4, Aug., 1964, pp. 145–174.
16.
Morley, A., “Critical Loads for Long Tapering Struts,” Engineering, Vol. 104, 1917, p. 295.
17.
Radomski, B., “Compression Struts with Nonprogressively Variable Moment of Inertia,” NACA Technical Memorandum No. 861, 1938.
18.
Tebedge, N., and Lambert, T., “Linear Stability Analysis of Beam‐Columns,” Journal of the Structural Division, ASCE, Vol. 99, No. ST12, Dec., 1973, pp. 2439–2457.
19.
Templeton, H., “Approximate Solution for Tapered Pin‐Ended Struts,” Journal of the Royal Aeronautic Society, Vol. 48, 1944, p. 6.
20.
Thomson, W. T., “Critical Load of Columns of Varying Cross Section,” Transactions, ASME, June, 1950, p. 132.
21.
Timoshenko, S. P., “Buckling of Bars of Variable Cross Section,” Bulletin of the Polytechnic Institute, Kiev, U.S.S.R., 1908.
22.
Timoshenko, S. P., and Gere, J. M., Theory of Elastic Stability, 2nd ed., McGraw‐Hill Book Company, Inc., New York, N.Y., 1961.
23.
Young, D. H., “Inelastic Buckling of Variable Section Columns,” Transactions, ASME, Vol. 67, 1945, p. A‐165.
Information & Authors
Information
Published In
Copyright
Copyright © 1986 ASCE.
History
Published online: Jun 1, 1986
Published in print: Jun 1986
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.