General Behavior of WF Steel Shear Link Beams
Publication: Journal of Structural Engineering
Volume 112, Issue 2
Abstract
The behavior of different length wide flange (WF) links in eccentrically braced steel frames with or without axial force application, were experimentally investigated using a subassemblage system simulating the frame action. The results are examined with emphasis on the influence of link length on the performance. Moment, shear, and axial force interaction, as well as the effect of strain hardening on moment redistribution, energy dissipation, and flange and web buckling are considered. Design and analysis methods for cyclically loaded links are proposed.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Haaijer, G., “Plate Buckling in the Strain‐Hardening Range,” Journal of the Engineering Mechanics Division, ASCE, Vol. 83, No. EM2, Apr., 1957.
2.
Hall, W. J., and Newmark, N. M., “Shear Deflections of Wide‐Flange Steel Beams in The Plastic Range,” Transactions, ASCE, Vol. 122, Paper No. 2878, 1957, p. 666.
3.
Hjelmstad, K. D., and Popov, E. P., “Seismic Behavior of Active Beam Links in Eccentrically Braced Frames,” EERC Report 83‐24, Univ. of California, Berkeley, CA, 1983.
4.
Hodge, P. G., “Interaction Curves for Shear and Bending of Plastic Beams,” Journal of Applied Mechanics, Vol. 24, 1957.
5.
Kasai, K., and Popov, E. P., “On Seismic Design of Eccentrically Braced Steel Frames,” Proceedings 8W CEE, San Francisco, CA, Vol. 5, July 21–28, 1984, pp. 387–394.
6.
Kasai, K., “A Study of Seismically Resistant Eccentrically Braced Steel Frame Systems, thesis presented to Univ. of California, Berkeley, in June, 1985, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
7.
Kasai, K., and Popov, E. P., “Cyclic Web Buckling Control of Shear Link Beams,” Journal of Structural Engineering, ASCE, to be published.
8.
Kusuda, T., and Thurlimann, B., “Strength of Wide‐Flange Beams Under Combined Influence of Moment, Shear, and Axial Force,” Report No. 248.1, Fritz Engineering Laboratory, Lehigh Univ., Bethlehem, PA, 1958.
9.
Lay, M. G., “Flange Local Buckling in Wide‐Flange Shapes,” Journal of the Structural Division, ASCE, Vol. 91, No. ST6, Dec., 1965.
10.
Lay, M. G., and Galambos, T. V., “The Inelastic Behavior of Beams Under Moment Gradient,” Report No. 297.12, Fritz Engineering Laboratory, Lehigh Univ., Bethlehem, PA, 1964.
11.
Malley, J. O., and Popov, E. P., “Design Considerations for Shear Links in Eccentrically Braced Frames,” EERC Report 83‐24, Univ. of California, Berkeley, CA, 1983.
12.
Manheim, D. N., and Popov, E. P., “Plastic Shear Hinges in Steel Frames,” Journal of Structural Engineering, ASCE, Vol. 109, No. 10, Oct., 1983, pp. 2404–2419.
13.
Neal, B. G., “Effect of Shear Force on the Fully Plastic Moment of an I‐Beam,” Journal of Mechanical Engineering Science, Vol. 3, No. 3, 1961.
14.
“Plastic Design in Steel,” ASCE Manual 41, 2nd ed., ASCE‐WRC, New York, NY, 1971.
15.
Popov, E. P., Amin, N. R., Louie, J. J. C., and Stephen, R. M., “Cyclic Behavior of Large Beam‐Column Assemblies,” Earthquake Spectra, Vol. 1, No. 2, Feb., 1985, pp. 3–38.
16.
Ricles, J. M., “Cyclic Behavior of Composite Shear Links,” CE 299 Report, Dept. of Civ. Engrg., Univ. of California, Berkeley, CA, 1985.
17.
Roeder, C. W., and Popov, E. P., “Inelastic Behavior of Eccentrically Braced Steel Frames Under Cyclic Loading,” EERC Report No. 77‐18, Univ. of California, Berkeley, CA, 1977.
18.
Shing, P. B., and Mahin, S. A., “Pseudodynamic Test Method for Seismic Performance Evaluation: Theory and Implementation,” EERC Report No. 84‐01, Univ. of California, Berkeley, CA, 1984.
19.
“Specifications for the Design, Fabrication and Erection of Structural Steel for Buildings with Commentary,” Manual of Steel Construction, 8th ed., AISC, 1980.
20.
Teal, E., “Practical Design of Eccentrically Braced Frames to Resist Seismic Forces,” Structural Steel Education Council, San Francisco/El Monte, CA, 1979.
21.
Udagawa, K., Takanashi, K., and Tanaka, H., “Restoring Force Characteristics of H‐shaped Steel Beams Under Cyclic and Reversed Loadings,” Transactions of A.I.J., No. 264, Feb., 1978 (in Japanese).
22.
Yamanouchi, H., Midorikawa, M., Nishiyama, I., and Watabe, M., “Experimental Results on a K‐Braced Steel Structure Under Seismic Loading Utilizing Full‐Scale Six‐Story Test Structure—U.S./Japan Cooperative Research Program,” Proceedings, Annual Technical Session, Structural Stability Research Council, San Francisco, CA, 1984.
23.
Yoshimura, K., “Inelastic Behavior of Steel Members Subjected to Alternating Loads,” thesis presented to Kyushu Univ., at Fukuoka, Japan, in 1973, in partial fulfillment of the requirements for the degree of Doctor of Engineering.
Information & Authors
Information
Published In
Copyright
Copyright © 1986 ASCE.
History
Published online: Feb 1, 1986
Published in print: Feb 1986
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.