Cyclic Response of Steel Braces
Publication: Journal of Structural Engineering
Volume 112, Issue 2
Abstract
A model for inelastic response analysis of braced steel structures is presented. This model achieves realism and efficiency by combining analytical formultions with formulas developed on the basis of a study of experimental data. A brace is idealized as a pin‐ended member with a plastic hinge located at its midspan. Analytical expressions for the axial force versus axial deformation behavior of the brace are derived on the basis of the classical beamcolumn equation and a plastic flow hypothesis for the plastic hinge. Several empirical behavioral characteristics are incorporated to achieve better representation of observed cyclic inelastic behavior. The model is implemented in a computationally efficient manner so as to be suitable for studying the dynamic response of relatively large structural systems. Verification of the new model is performed on the basis of a quasi‐static analysis of an individual strut and dynamic response analyses of a braced steel frame. The model is able to accurately simulate the cyclic inelastic behavior of steel braces and appears to be reliable and applicable to dynamic analyses of braced frame structures.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Black, R. G., Wenger, W. A. B., and Popov, E. P., “Inelastic Buckling of Steel Strut under Cyclic Load Reversals,” Report No. UCB/EERC‐80/40, Earthquake Engineering Research Center, Univ. of California, Berkeley, CA, Oct., 1980.
2.
Drucker, D. C., “Plasticity,” Structural Mechanics, Pergamon Press, London, England, 1960, pp. 407–488.
3.
Fujiwara, T., “Earthquake Response of Framed Structures Having Aseismic Elements Part 1,” Transactions of AIJ, No. 285, Nov., 1979, pp. 101–108.
4.
Fujiwara, T., “Seismic Behavior of Inelastic Member of Braced Frame Structure,” Proceedings, 7th World Conference on Earthquake Engineering, Sept., 1980.
5.
Ghanaat, Y., and Clough, R. W., “Shaking Table Test of a Tubular Steel Frame Model,” Report No. UCB/EERC‐82/02, Earthquake Engineering Research Center, Univ. of California, Berkeley, CA, Jan., 1982.
6.
Golafshani, A., and Powell, G. H., “DRAIN‐2D2, A Program for Inelastic Seismic Response of Structures,” thesis presented to the Univ. of California, at Berkeley, CA, in 1982, in partal fulfillment of the requirements for the degree of Doctor of Philosophy.
7.
Gugerli, H., and Goel, S. C., “Inelastic Cyclic Behavior of Steel Bracing Members,” Report No. UMEE 82R1, Dept. of Civ. Engrg., Univ. of Michigan, Ann Arbor, MI, Jan., 1982.
8.
Higginbotham, A. B., “The Inelastic Cyclic Behavior of Axially‐Loaded Steel Members,” thesis presented to the Univ. of Michigan, at Ann Arbor, MI, in 1973, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
9.
Ikeda, K., “Analysis of the Cyclic Inelastic Response of Braced Steel Structures,” thesis presented to the Univ. of California, at Berkeley, CA, in 1984, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
10.
Ikeda, K., Mahin, S. A., and Dermitzakis, S. N., “Phenomenological Modeling of Steel Braces under Cyclic Loading,” Report No. UCB/EERC‐84/09, Earthquake Engineering Research Center, Univ. of California, Berkeley, CA, May, 1984.
11.
Maekawa, K., and Okamura, H., “The Deformational Behavior and Constitutive Equation of Concrete Using the Elasto‐Plastic and Fracture Model,” Journal of Faculty of Engineering, Univ. of Tokyo (B), Vol. XXXII, Sept., 1983.
12.
Nilforoushan, R., “Seismic Behavior of Multi‐Story K‐Braced Frame Structures,” Univ. of Michigan Research Report UMEE 73R9, Ann Arbor, MI, Nov., 1973.
13.
Nonaka, T., “An Elastic‐Plastic Analysis of a Bar under Repeated Axial Loading,” International Journal of Solids Structures, Vol. 9, 1973, pp. 560–580,
(Erratum in No. 10, p. 569).
14.
Nonaka, T., “Approximation of Yield Condition for the Hysteretic Behavior of a Bar under Repeated Axial Loading,” International Journal of Solids Structures, Vol. B, Paramon Press, Great Britain, 1977, pp. 637–643.
15.
Singh, P., “Seismic Behavior of Braces and Braced Steel Frames,” thesis presented to the Univ. of Michigan, at Ann Arbor, MI, in 1977, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
16.
Shing, P. B., Javadian‐Gilani, A. S., and Mahin, S. A., “Evaluation of Seismic Behavior of a Braced Tubular Structure by Pseudodynamic Testing,” Proceedings, 3rd International Symposium on Offshore and Arctic Engineering, New Orleans, LA, Feb., 1984.
17.
Shing, P. B., and Mahin, S. A., “Pseudodynamic Test Method for Seismic Performance Evaluation Theory and Implementation,” Report No. UCB/EERC‐84/01, Earthquake Engineering Research Center, Univ. of California, Berkeley, CA, Jan., 1984.
18.
Wakabayashi, M., Nonaka, T., and Shibata, M., “Studies on the Post Buckling Behavior of Braces, Part 1,” Abstracts, Annual Meeting of Kinki Branch of AIJ, June, 1972, pp. 197–200 (in Japanese).
19.
Zayas, A. Z., Shing, P. B., Mahin, S. A., and Popov, E. P., “Inelastic Structural Modeling of Braced Offshore Platforms for Seismic Loading,” Report No. UCB/EERC‐81/04, Earthquake Engineering Research Center, Univ. of California, Berkeley, CA, Jan., 1981.
Information & Authors
Information
Published In
Copyright
Copyright © 1986 ASCE.
History
Published online: Feb 1, 1986
Published in print: Feb 1986
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.