Nonlinear Design of Reinforced Concrete Frameworks
Publication: Journal of Structural Engineering
Volume 112, Issue 10
Abstract
A nonlinear design method for reinforced concrete framed structures is developed. Both the strength and ductility criteria for reinforced concrete design are simultaneously and explicitly satisfied at the specified service and ultimate load levels. The strain‐hardening effect of high strength reinforcing steel is also included in the design. An optimal design approach is adopted, and the design formulation becomes a nonlinear programming problem that can be solved by suitable mathematical solution algorithms and related computer codes. The design solution includes the set of member cross‐section dimensions and steel percentages for which the members have sufficient plastic moment and rotation capacities at the specified ultimate load level while ensuring adequate serviceability at the specified service load level, and for which the total cost of steel and concrete is minimum. A one‐story two‐bay frame example is presented to demonstrate a practical application of the method.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
ACI, Building Code Requirements for Reinforced Concrete (ACI 318‐83), 1983.
2.
Ali, M. M., “Optimal Limit‐State Design of Reinforced Concrete Frameworks,” thesis submitted in partial fulfillment of the requirements for the Doctor of Philosophy Degree, University of Waterloo, Waterloo, Ontario, Canada, 1977.
3.
Ali, M. M., and Grierson, D. E., “Reinforced Concrete Design for Strength and Deformability,” Journal of the Engineering Mechanics Division, ASCE, Vol. 100, No. EM5, Oct., 1974, pp. 839–860.
4.
Ali, M. M., and Grierson, D. E., “Critical Deformation States for Locking Structures,” Proceedings of the Seventh Canadian Congress of Applied Mechanics (CANCAM‐79), University de Sherbrooke, Sherbrooke, Quebec, Canada, May–June, 1979.
5.
Baker, A. L. L., “Ultimate Load Theory Applied to the Design of Reinforced and Prestressed Concrete Frames,” Concrete Series, Concrete Publications Ltd., London, England, 1956.
6.
Best, M. J., “FCDPAK: A Fortran IV Subroutine to Solve Differential Mathematical Programs,” Technical Report, Department of Combinatories and Optimization, University of Waterloo, Waterloo, Ontario, Canada, Aug., 1972.
7.
Burnett, E. F. P., and Ali, M. M., “The Significance of Structural Serviceability in Reinforced Concrete Limit Design,” ACI Fall Convention, Mexico City, Mexico, Oct., 1976.
8.
Cohn, M. Z., “Optimum Limit Design for Reinforced Concrete Continuous Beams,” Proceedings ICE, Vol. 30, London, England, Apr., 1965, pp. 17–32.
9.
Cohn, M. Z., “Nonlinear Design of Concrete Structures: Problems and Prospects,” International Symposium on ‘Nonlinear Design of Concrete Structures’, University of Waterloo, Waterloo, Ontario, Canada, Aug., 1979, pp. 3–42.
10.
Corley, G. W., “Rotation Capacity of Reinforced Concrete Beams,” Journal of Structural Division, ASCE, Vol. 92, ST5, Oct., 1966, pp. 121–146.
11.
Dell'Acqua, L. C., and Maier, G., “A Matrix Theory of Elastic‐Locking Structures,” Meccanica, No. 4, Vol. IV, 1969, pp. 298–313.
12.
Furlong, R. W., “Design of Concrete Frames by Assigned Limit Moments,” Journal ACI, Vol. 67, No. 4, Apr., 1970, pp. 341–353.
13.
Ghosh, S. K., “Contributions to Nonlinear Analysis of Reinforced Concrete,” thesis submitted to the University of Waterloo, Waterloo, Ontario, Canada in 1973 in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
14.
Gladwell, G. M. L., and Grierson, D. E., “Structural Analysis for Idealized Nonlinear Material Behavior,” Journal of Structural Mechanics, Vol. 2, No. 1, 1973, pp. 33–55.
15.
Grierson, D. E., “First‐Order Analysis of Nonlinear Structures,” SM Study No. 9, Solid Mechanics Division, University of Waterloo, Waterloo, Ontario, Canada, 1973.
16.
Levi, F., “Study of the Inelastic Phenomena Up to Failure,” (in Italian), Giornale del Genio Civil, Rome, Italy, Vol. 92, No. 3, Mar., 1954, pp. 180–192.
17.
Macchi, G., “A Proposal of Analysis Based on the Theory of Imposed Rotations,” (in French), Bulletin d'Information CEB, No. 21, Paris, France, Jan., 1960, pp. 121–158.
18.
Mattock, A. H., “Rotation Capacity of Hinging Regions in Reinforced Concrete Beams,” Proceedings International Symposium on Flexural Mechanics of Reinforced Concrete, Miami, Florida, November, 1964, ACI Special Publication SP‐12, 1965.
19.
Munro, J., Krishnamoorthy, C. S., and Yu, C. W., “Optimal Design of Reinforced Concrete Frames,” The Structural Engineer, Vol. 50, No. 7, July, 1972, pp. 259–264.
20.
Neal, B. G., The Plastic Methods of Structural Analysis, 2nd Edition, Chapman and Hall, London, England, 1963.
21.
Priestley, M. J. N., Park, R., and Lu, F. P. S., “Moment‐Curvature Relationships for Prestressed Concrete in Constant Moment Zones,” Magazine of Concrete Research, Vol. 23, No. 75–76, June–Sept., 1971, pp. 69–78.
22.
Sawyer, H. A., Jr., “Design of Concrete Frames for Two Failure Stages,” Proceedings International Symposium on Flexural Mechanics of Reinforced Concrete, Miami, Florida, November, 1964, ACI Special Publication SP‐12, 1965.
Information & Authors
Information
Published In
Copyright
Copyright © 1986 ASCE.
History
Published online: Oct 1, 1986
Published in print: Oct 1986
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.