Elastic‐Plastic‐Softening Analysis of Plane Frames
Publication: Journal of Structural Engineering
Volume 111, Issue 4
Abstract
Softening of reinforced concrete sections at advanced curvatures in flexure is taken into account in collapse load analysis of frames. The analysis employs a trilinear elastic‐plastic‐softening approximation to real moment‐curvature curves, and elastic unloading and reloading from the softening curve is assumed. Formulas for hinge length in reinforced concrete flexural members are reviewed. Elements of a stiffness matrix for elastic elements with softening portions are derived. The stiffness matrix allows extension of the capability of an existing computer program for elastic‐plastic analysis to softening or hardening. Several examples demonstrate the application of computer program PAWS (Plastic Analysis with Softening) to concrete frame structures. A steeper softening slope reduces both the number of hinges formed before collapse and the collapse load, compared with elastic‐plastic behavior. Values of critical softening parameters for first or later formed hinges may be found using PAWS, and theoretical values are confirmed. Quite small softening parameters lead to large reductions in static collapse and shakedown loads, especially when there are significant residual moments.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
ACI 318‐83, Building Code Requirements for Reinforced Concrete, American Concrete Institute, Detroit, 1983.
2.
Ahmad, S. H., and Shah, S. P., “Complete Stress‐Strain Curve of Concrete and Nonlinear Design,” Proceedings International Symposium on Nonlinear Design of Concrete Structures, University of Waterloo, Canada, 1979, pp. 61–81.
3.
Bachmann, H., “Influence of Shear and Bond on Rotational Capacity of Reinforced Concrete Beams,” LABSE Memoires, Vol. 30, 1970, No. II, pp. 11–28.
4.
Baker, A. L. L., and Amarakone, A. M. N., “Inelastic Hyperstatic Frames Analysis,” Proceedings of the International Symposium on the Flexural Mechanics of Reinforced Concrete, Miami, 1964, ACI SP‐12, 1965, pp. 85–142.
5.
Barnard, P. R., “The Collapse of Reinforced Concrete Beams,” Proceedings of the International Symposium on the Flexural Mechanics of Reinforced Concrete, Miami, 1964, ACI SP‐12, 1965, pp. 501–520.
6.
Barnard, P. R., and Johnson, R. P., “Plastic Behaviour of Continuous Composite Beams,” Proceedings I.C.E. (London), Vol. 32, Oct., 1965, pp. 180–187.
7.
Bazant, Z. P., “Instability, Ductility and Size Effect in Strain‐Softening Concrete,” Journal of the Engineering Mechanics Division, ASCE, Vol. 102, No. EM2, Apr., 1976, pp. 331–344.
8.
Cohn, M. Z., “Equilibrium Methods of Limit Design for Concrete Frames,” Paper 7514S, Proceedings I.C.E. (London), 1972, pp. 263–275.
9.
Corley, W. G., “Rotational Capacity of Reinforced Concrete Beams,” Journal of the Structural Division., ASCE, Vol. 92, No. ST5, Oct., 1966, pp. 121–126.
10.
Cranston, W. B., “A Computer Method for Inelastic Analysis of Plane Frames,” Technical Report TRA/386, Cement and Concrete Association, London, Mar., 1965.
11.
Cranston, W. B., “Tests on Reinforced Concrete Frames; 1: Pinned Portal Frames,” Technical Report TRA/392, Cement and Concrete Association, London, Aug., 1965.
12.
Cranston, W. B., and Cracknell, J. A., “Tests on Reinforced Concrete Frames; 2: Portal Frames with Fixed Feet,” Technical Report TRA/420, Cement and Concrete Association, London, Sept., 1969.
13.
Darvall, P. LeP., “Critical Softening of Hinges in Portal Frames,” Journal of Structural Engineering, ASCE, Vol. 110, No. 1, Jan., 1984, pp. 157–162.
14.
Darvall, P. LeP., “Critical Softening of Hinges in Indeterminate Beams and Portal Frames,” Civil Engineering Transactions, I.E. Australia, Vol. CE 25, No. 3, 1983, pp. 199–210.
15.
Darvall, P. LeP., “Some Aspects of Softening in Flexural Members,” Research Report 3/1983, Dept. of Civil Engineering, Monash University, Australia.
16.
Darvall, P. LeP., “Shakedown with Softening in Reinforced Concrete Beams,” Materials and Structures, RILEM, Paris, 1984.
17.
Gosh, S. K., “Analysis of Concrete Structures Allowing for Strain‐Softening,” Indian Concrete Journal, V51, No. 4, Apr., 1977, pp. 108–116.
18.
Heyman, J., Plastic Design of Frames: 2 Applications, Cambridge Univ. Press, 1971, 292 pp.
19.
Karsan, I., and Jirsa, J. O., “Behaviour of Concrete Under Compressive Loadings,” Journal of the Structural Division, ASCE, Vol. 95, No. ST12, Dec., 1969, pp. 2543–2563.
20.
Mendis, P. A., and Darvall, P. LeP., “Elastic‐Plastic‐Softening Analysis of Plane Frames,” Research Report 5/1984, Dept. of Civil Engineering, Monash University, Australia.
21.
Nawy, E. G., Danesi, R. F., and Grosko, J. J., “Rectangular Spiral Binders Effect on Plastic Hinge Rotation Capacity in Reinforced Concrete Beams,” Journal ACI, Vol. 65, No. 12, Dec., 1968, pp. 1001–1010.
22.
Nylander, H., and Sahlin, S., “Investigation of Continuous Concrete Beams at Far Advanced Compressive Strains in Concrete,” Betong, 1955, 40, (3), Translation No. 66, Cement and Concrete Association, London.
23.
Park, R., and Paulay, T., Reinforced Concrete Structures, Wiley‐Interscience, 1975, pp. 199–203, and 224–236.
24.
Rosenbleuth, E., and Diaz de Cossio, R., “Instability Considerations in Limit Design of Concrete Frames,” Proceedings International Symposium on Flexural Mechanics of Reinforced Concrete, Miami, 1964, ACI SP‐12, 1965, pp. 439–463.
25.
Sawyer, H. A., “Design of Concrete Frames for Two Failure Stages,” Proceedings International Symposium on the Flexural Mechanics of Reinforced Concrete, Miami, 1964, ACI SP‐12, 1965, pp. 405–431.
26.
Srinivasa Rao, P., Kannan, P. R., and Subrahmanyam, B. V., “Influence of Span Length and Application of Load on the Rotation Capacity of Plastic Hinges,” Journal ACI, Vol. 68, No. 6, June, 1971, pp. 468–471.
27.
Taber, R. L., and Darvall, P. LeP., “Work Softening Behaviour in Simple Reinforced Concrete Structures,” Proceedings Seventh Australasian Conference on the Mechanics of Structures and Materials, Perth, 1980, pp. 138–142.
28.
Taylor, H. P. J., “The Behaviour of In‐Situ Beam‐Column Joints,” Technical Report 42.492, Cement and Concrete Association, London, May, 1974.
29.
ULARC, “Simple Elasto‐Plastic Analysis of Plane Frames,” Programmed by A. Sudhakar, G. H. Powell, G. Orr, R. Wheaton, University of California, Berkeley, California, 1972 (Distributed by NISEE/Computer Applications).
30.
Warner, R. F., and Yeo, M. F., “Collapse Behaviour of Concrete Structures with Limited Ductility” Report No. R61, Department of Civil Engineering, University of Adelaide, Jan., 1984.
Information & Authors
Information
Published In
Copyright
Copyright © 1985 ASCE.
History
Published online: Apr 1, 1985
Published in print: Apr 1985
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.