Transverse Stirrup Spacing in R/C Beams
Publication: Journal of Structural Engineering
Volume 111, Issue 2
Abstract
Shear tests of five approximately one‐third scale models of large, reinforced concrete beams with shear reinforcement are examined to determine how varying web widths and different transverse stirrup distributions affect beam shear strength. Load‐deflection response, ultimate shear capacities, stirrup stresses, surface inclined crack widths, and internal crack widths are discussed. The results indicate that the shear capacity of a large reinforced concrete beam is not affected by the transverse spacing of stirrups across the web width.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
ACI Committee 318, Building Code Requirements for Reinforced Concrete (ACI 318‐77), American Concrete Institute, Detroit, Mich., 1977, 103 pp.
2.
Beeby, A. W., “An Investigation of Cracking in Slabs Spanning One Way,” Technical Report TRA 443, Cement and Concrete Association, London, England, 1972.
3.
Diaz de Cossio, R., discussion of “Shear and Diagonal Tension,” ACI‐ASCE Committee 326, Journal of the American Concrete Institute, Vol. 59, Sept., 1962, pp. 1323–1332.
4.
Fenwick, R. C., and Paulay, T., “Mechanisms of Shear Resistance of Reinforced Concrete Members,” Journal of the Structural Division, ASCE, Vol. 94, No. ST10, Oct., 1968, pp. 2235–2350.
5.
Hsiung, W., and Frantz, G. C., “An Exploratory Study of the Shear Strength of Wide Reinforced Concrete Beams with Web Reinforcement,” Research Report CE83‐151, Department of Civil Engineering, University of Connecticut, Storrs, Conn., July, 1983.
6.
Husain, S. I., and Ferguson, P. M., “Flexural Crack Width at Bars in Reinforced Concrete Beams,” Research Report 104‐1F, Center for Highway Research, The University of Texas at Austin, June, 1968.
7.
Iyengar, K. T., Rangan, B. V., and Palaniswamy, R., “Some Factors Affecting the Shear Strength of Reinforced Concrete Members,” Indian Concrete Journal, Vol. 42, Dec., 1968, pp. 499–505.
8.
Leonhardt, F., and Walther, R., “The Stuttgart Shear Tests, 1961,” Translation No. 111, Cement and Concrete Association, London, England, 1964.
9.
Loeber, P. J., “Shear Transfer by Aggregate Interlock,” thesis presented to the University of Canterbury, Christchurch, New Zealand, in 1970, in partial fulfillment of the requirements for the degree of Master of Engineering.
10.
Park, R., and Paulay, T., Reinforced Concrete Structures, John Wiley and Sons, Inc., New York, N.Y., 1975, pp. 293–294.
11.
Swamy, R. N., and Andriopoulus, A. D., “Contributions of Aggregate Interlock and Dowel Forces to the Shear Resistance of Reinforced Beams with Web Reinforcement,” Shear in Reinforced Concrete, SP‐42, American Concrete Institute, Detroit, Mich., 1974, pp. 129–166.
12.
Taylor, H. P. J., “The Fundamental Behavior of Reinforced Concrete Beams in Bending and Shear,” Shear in Reinforced Concrete, SP‐42, American Concrete Institute, Detroit, Mich., 1974, pp. 43–77.
Information & Authors
Information
Published In
Copyright
Copyright © 1985 ASCE.
History
Published online: Feb 1, 1985
Published in print: Feb 1985
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.