Rapid Exact Inelastic Biaxial Bending Analysis
Publication: Journal of Structural Engineering
Volume 111, Issue 12
Abstract
A general analysis of cross sections subjected to axial force and biaxial bending is presented. The method is based on Green's theorem and allows for exact determination of stress resultants and tangent stiffnesses for a given set of deformations when the section boundary is rectilinear. The method may be applied to cross sections of any material provided that the stress‐strain relationships are integrable. The method is extremely rapid because stress integrals need only be evaluated at a small number of points on the section boundary. Unlike existing tangent stiffness methods, discontinuous stress‐strain relationships may be used.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Alcock, D. G., “Computer Analysis of Reinforced Concrete Members and Foundations,” The Structural Engineer, Vol. 45, No. 9, Sept., 1967, pp. 303–311.
2.
Baker, J. F., Home, M. R., and Heyman, J., “The Steel Skeleton—Vol. II, Plastic Behaviour and Design,” Cambridge University Press, 1956.
3.
Bennett, E. W., Cranston, W. B., Monnier, T., Neville, A. M., and Thielen, G., “Deformability of Concrete Structures—Basic Assumptions,” CEB Bulletin D'Information, No. 90, Part II, Apr., 1973, p. 10.
4.
Chen, W. F., and Shoraka, M. T., “Tangent Stiffness Method for Biaxial Bending of Reinforced Concrete Columns,” IABSE, Publications, Vol. 35‐I, 1975, pp. 23–44.
5.
Czerniak, E., “Analytical Approach to Biaxial Eccentricity,” Journal of the Structural Division, ASCE, Vol. 88, No. 574, Proc. Paper 3239, Aug., 1962, pp. 105–158.
6.
Desayi, P., and Krishnan, S., “Equation for the Stress‐Strain Curve of Concrete,” Journal of the American Concrete Institute, Proc. Vol. 61, No. 3, Mar., 1964, pp. 345–350.
7.
Farah, A., and Huggins, M. W., “Analysis of Reinforced Concrete Columns Subject to Longitudinal Load and Biaxial Bending,” Journal of the American Concrete Institue, Vol. 66, No. 7, July, 1969, pp. 569–575.
8.
Folie, G. M., “Contour Integration for Calculation of Properties of Sections,” Civil Engineering Transactions, Institution of Engineers, Australia, Vol. CE13, No. 1, Apr., 1971, pp. 25–27.
9.
Gilbert, R. I., and Warner, R. F., “Tension Stiffening in Reinforced Concrete Slabs,” Journal of the Structural Division, ASCE, Vol. 104, No. ST12, Proc. Paper 14211, Dec., 1978, pp. 1885–1900.
10.
Hognestad, E., “A Study of Combined Bending and Axial Load in Reinforced Concrete Members,” University of Illinois Engineering Station Bull., No. 399, Vol. 49, No. 22, Nov., 1951.
11.
Kent, D. C., and Park, R., “Flexural Members with Confined Concrete,” Journal of the Structural Division, ASCE, Vol. 97, No. ST7, Proc. Paper 8243, July, 1971, pp. 1969–1990.
12.
Ketter, R. L., Kaminsky, E. L., and Beedle, L. S., “Plastic Deformation of Wide‐Flange Beam‐Columns,” Transactions, ASCE, Vol. 120, 1955, pp. 1028–1061.
13.
Lachance, L., and Hays, C. O., “Composite Section Non‐Linear Solutions,” Journal of the Structural Division, ASCE, Vol. 106, No. ST11, Proc. Paper 15801, Nov., 1980, pp. 2203–2219.
14.
Menegotto, M., and Pinto, P. E., “Slender RC Compressed Members in Biaxial Bending,” Journal of the Structural Division, Vol. 103, No. ST3, Mar., 1977, pp. 587–605.
15.
Pinto de Magalhaes, M., “Biaxially Loaded Concrete Sections,” Journal of the Structural Division, ASCE, Vol. 105, No. ST12, Dec., 1979, pp. 2639–2656.
16.
Robertson, A., and Cook, G., “Transition from the Elastic to the Plastic State in Mild Steel,” Proceedings of the Royal Society, Series A, Vol. 88, London, England, 1913.
17.
Rotter, J. M., “Rapid Exact Inelastic Biaxial Bending Analysis,” Research Report No. R405, School of Civil Engineering, Univ. of Sydney, Australia, Apr., 1981.
18.
Santathadaporn, S., and Chen, W. F., “Tangent Stiffness Method for Biaxial Bending,” Journal of the Structural Division, ASCE, Vol. 98, No. ST1, Jan., 1972, pp. 153–163.
19.
Saville, W. G. S., “Analysing Non‐Homogeneous Sections Subjected to Bending and Direct Stress,” Civil Engineering, Vol. 10, No. 3, Mar., 1940, p. 170.
20.
“An Investigation of Prestressed Concrete Plank Bridges—Report on 15 metre Span Bridge,” Investigation Report No. S233, School of Civil Engineering, University of Sydney, Australia, Dec., 1978.
21.
Sokolnikoff, I. S., and Redheffer, R. M., Mathematics of Physics and Modern Engineering, 2nd ed., McGraw‐Hill, New York, NY, 1966.
22.
Virdi, K. S., “A New Technique for Moment‐Thrust‐Curvature Calculations for Columns in Biaxial Bending,” Sixth Australian Conference on the Mechanics of Structures and Materials, Univ. of Canterbury, Christchurch, NZ, Aug., 1977, pp. 307–313.
23.
Warner, R. F., “Biaxial Moment Thrust Curvature Relations,” Journal of the Structural Division, ASCE, Vol. 95, No. ST5, Proc. Paper 6564, May, 1969, pp. 923–940.
Information & Authors
Information
Published In
Copyright
Copyright © 1985 ASCE.
History
Published online: Dec 1, 1985
Published in print: Dec 1985
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.