I Interaction of Plastic Local and Lateral Buckling
Publication: Journal of Structural Engineering
Volume 111, Issue 10
Abstract
Attention is given to the interaction between local and lateral buckling of I‐sections and their influence on plastic flexural ductility in regions of moment gradient. It is shown by means of simple theoretical formulations and the results of a series of tests to failure that rotation capacity in the plastic range is influenced significantly not only by conventional codified parameters, but also by the ratio of span to flange thickness and coincident axial force. In addition, the interaction between local and lateral buckling in the plastic region is demonstrated, and a model is formulated for quantifying this strain‐weakening effect. The results are relevant to the plastic design of structures as well as more general research into methods of improving flexural ductility of I‐sections.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Axelrod, M. S., “Local Web Buckling and Lateral Buckling of Plastically‐Designed Steel Beams and Beam‐columns,” thesis presented to the University of the Witwatersrand, Johannesburg in 1982, in partial fulfillment of the requirements for the degree of Master of Science.
2.
“BS 449: Part 2: 1969. Specification for the Use of Structural Steel in Buildings,” British Standards Institute, 1969.
3.
Driscoll, G. C., “Rotation Capacity Requirements for Single‐Span Frames,” Fritz Engineering Laboratory Report No. 268.5, Lehigh University, Sept., 1958.
4.
Kemp, A. R., “Local Buckling of I‐sections in Plastic Regions of High Moment Gradient,” Instability and Plastic Collapse of Steel Structures, L. J. Morris, Ed., Granada, London, 1983, pp. 529–537.
5.
Kemp, A. R., “Slenderness Limits Normal to the Plane‐of‐Bending for Beam‐Columns in Plastic Design,” Journal of Constructional Steel Research, Elsevier Applied Science Publishers, Vol. 4, No. 2, Barking, England, 1984.
6.
Kerfoot, R. P., “Rotation Capacity of Beams,” Fritz Engineering Laboratory Report No. 297.14, Lehigh Univ., Mar., 1965.
7.
Korn, A., and Galambos, T. V., “Behavior of Elastic‐Plastic Frames,” Journal of the Structural Division, ASCE, Vol. 94, No. ST5, Proc. Paper No. 5942, May, 1968, pp. 1119–1142.
8.
Lay, M. G., and Galambos, T. V., “Inelastic Steel Beams under Uniform Moment,” Journal of the Structural Division, ASCE, Vol. 91, No. ST6, Proc. Paper No. 4566, Dec., 1965, pp. 67–93.
9.
Lay, M. G., and Galambos, T. V., “Inelastic Beams under Moment Gradient,” Journal of the Structural Division, ASCE, Vol. 93, No. ST1, Proc. Paper No. 5110, Feb., 1967, pp. 381–399.
10.
Lukey, A. F., and Adams, P. F., “Rotation Capacity of Wide‐Flange Beams under Moment Gradient,” Journal of the Structural Division, ASCE, Vol. 95, No. ST6, Proc. Paper No. 6599, June, 1969, pp. 1173–1188.
11.
Neathercot, D. A., and Trahair, N. S., “Inelastic Lateral Buckling of Determinate Beams,” Journal of the Structural Division, ASCE, Vol. 102, No. ST4, Proc. Paper No. 12020, Apr., 1976, pp. 701–717.
12.
“S.A.A. Steel Structures Code, AS1250‐1972,” Standards Association of Australia, 1972.
13.
Smith, R. J., and Adams, P. F., “Experiments on Wide‐Flange Beams under Moment‐Gradient,” Structural Engineering Report No. 13, Department of Civil Engineering, University of Alberta, May, 1968.
14.
Southward, R. E., “Local Buckling in Universal Sections,” Internal Report, University of Cambridge Engineering Department, 1969.
15.
“Specification for the Design, Fabrication and Erection of Structural Steel for Buildings,” AISC, Chicago, Ill., Aug., 1978.
16.
Stowell, E. Z., “Compressive Strength of Flanges,” Technical Note No. 2020, National Advisory Committee for Aeronautics, 1950.
17.
White, M. W., “The Lateral‐Torsional Buckling of Yielded Structural Members,” Fritz Engineering Laboratory Report No. 205.E8, Lehigh University, 1956.
Information & Authors
Information
Published In
Copyright
Copyright © 1985 ASCE.
History
Published online: Oct 1, 1985
Published in print: Oct 1985
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.