Cold‐Formed Steell Farm Structures, Part I:Grain Bins
Publication: Journal of Structural Engineering
Volume 111, Issue 10
Abstract
Cylindrical cold‐formed steel structures are widely used for grain storage on the farm, as well as for stock facilities, storages, and utility structures. The information related to their analysis and design is scattered and incomplete; therefore a task committee was established by the ASCE Committee on Cold‐Formed Steel Members, with the following objectives: (3) To define the problems encounted in the analysis and design of these types of structures; and (2) to gather and develop information that could lead to rational methods of design. The state of the art for the upright cylindrical grain bins made of cold‐formed steel is discussed. Barrel shells will be discussed in a companion paper, Part II. Both papers critically examine the existing methods of analysis and, wherever possible, additional information and charts are provided to simplify the design process.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Abdel‐Sayed, G., “Loading in Grain Bins,” Westeel‐Rosco Ltd., Toronto, Ontario, Canada, 1973.
2.
Abdel‐Sayed, G., Fung, C., and Monasa, F., “State of the Art—Cylindrical Cold‐Formed Steel Farm Structures,” Proceedings, 5th International Specialty Conference on Cold‐Formed Steel Structures, St. Louis, Mo., Nov. 18–19, 1980, pp. 571–589.
3.
Abdel‐Sayed, G., Siddal, W., and Monasa, F., “Cylindrical Cold‐Formed Steel Farm Structures,” ASCE Convention, Oct. 26–31, 1981, St. Louis, Mo., preprint 81–526.
4.
Agricultural Engineering Year Book, Grain Storage Loads, Pressures, and Capacities, American Society of Agricultural Engineers, 1963, 1969, 1973.
5.
Airy, W., “The Pressure of Grain,” Minutes of Proceedings, Institute of Civil Engineers, London, England, Vol. 131, 1897, pp. 347–358.
6.
“American National Standard Building Code Requirements for Minimum Design Loads in Buildings and Other Structures,” American National Standards Institute, ANSI A58.1‐1972, New York, N.Y., 1972.
7.
Amundson, L. R., “Determination of Band Stresses and Lateral Wheat Pressure for a Cylindrical Bin,” Agricultural Engineering, Vol. 26, 1945, pp. 321–324.
8.
Anderson, P., “Temperature Stresses in Steel Grain‐Storage Tanks,” Civil Engineering, ASCE, Jan., 1966, p. 74.
9.
Arnold, P. C., McLean, A. G., and Roberts, A. W., “Bulk Solids: Storage, Flow and Handling,” Tunra Bulk Solids Handling Research Associates, University of Newcastle, NSW, Sept., 1980.
10.
Arnold, P. C., and McLean, A. G., “Wall Loads on Steel Bins,” Steel Construction, Vol. 12, No. 3, 1978.
11.
Balis, J. S., “Methodology on the Determination of Friction Coefficients of Agricultural Materials,” thesis presented to Purdue University, at Lafayette, Ind., in 1961, in partial fulfillment of the requirements for the degree of Master of Science.
12.
Barre, H. J., “Grain Pressures on Bin Walls and Related Problems,” Proceedings, Seventh Annual Grain Drying and Storage Conference, Texas Technological University, Lubbock, Tex., 1961, pp. 43–48.
13.
Barre, H., and Sammet, L. L., “Estimating Loads,” Farm Structures, John Wiley & Sons, Inc., New York, N.Y., 1950, pp. 438–460.
14.
Bergan, W., “Measurements in Grain Silos During Filling and Emptying,” Proceedings, Swedish Geotechnical Institute, Stockholm, Vol. 17, 1959, pp. 47–71.
15.
Britton, M. G., “Strain in Deep Bin Walls Due to Ambient Temperature Decrease,” thesis presented to Texas A&M, at College Station, Tex., in 1973, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
16.
Britton, M. G., “State of the Art—Predicting Static Pressure in Grain Bins,” ASAE Winger Meeting, Chicago, Ill., Dec. 13–16, 1977, published by ASAE, St. Joseph, Mich., 1978, Paper 77–4501, 8 pp.
17.
Brubaker, J. E., and Pos, J., “Determining Static Coefficients of Friction of Grains on Structural Surfaces,” Transactions, American Society of Agricultural Engineers, Vol. 8, No. 1, 1965, pp. 53–55.
18.
Canadian Farm Building Code, NRCC No. 15564, Associate Committee on the National Building Code 1977, 1983, National Research Council of Canada, Ottawa, Ontario, Canada, K1A 0R6.
19.
Caughey, R. A., “Lateral, Vertical Pressures of Granular Materials,” Iowa Experiment Station, Bulletin #172‐(1951), Iowa Experiment Station, Ames, Iowa.
20.
Cowdry, C. F., and O'Neil, P. G., “Report of Tests on a Model Cooling Tower,” No. 316a, National Physics Laboratory (Aero), Great Britain, Dec., 1956.
21.
Cowin, S. C., “Theory of Static Loads in Bins,” Journal of Applied Mechanics Transactions, ASME, Vol. 44, Ser. E, No. 3, Sept., 1977, pp. 409–412.
22.
Cowin, S. C., “The Pressure Ratio in the Theory of Bin Pressures,” Journal of Applied Mechanics Transactions, ASME, Vol. 46, Sept., 1979, pp. 524–528.
23.
Deutsch, G. P., and Schmidt, L. C., “Pressure on Silo Walls,” Journal of Engineering for Industry, Transactions of the ASME, May, 1969, pp. 450–459.
24.
DIN‐1055, “Design Loads in Buildings: Loads in Silos,” German Standard DIN 1055, Sheet 6, Berlin, Germany, 1964 (with supplementary provisions in May, 1977).
25.
Fordham, A. A., “The Direct Measurement of Lateral Pressure on Walls and Bins,” Engineering, Vol. 134, No. 3722, May 14, 1937, pp. 561–562.
26.
Gaylord, E. H., and Gaylord, C. N., “Granular Material Pressures in Bins,” ASAE Winter Meeting, Chicago, Ill., Dec. 13–16, 1977, published by ASAE, St. Joseph, Mich., 1978, Paper 77–4503, 16 pp.
27.
Ghiocel, D., and Lungn, D., Wind, Snow and Temperature Effects on Structures Based on Probability, Abacus Press, Tunbridge Wells, Kent, England, pp. 236–237.
28.
Henney, G. E. J., Aulbersberg, P., Elliott, G. E. B., and Stamm, P. H. H., “Lessons Learnt from the Development of Large Diameter Free‐Standing Grain Storage Bins in Southern Africa,” Design of Silos for Strength and Flow Conference, Powder Advisory Center, University of Lancaster, U.K., Sept., 1980.
29.
Isaacson, J. D., 1971, Investigations on the Basic Theory of Static and Dynamic Pressure Phenomena in Grain Under Conditions of Storage,” USDA, ARS 52‐48, 174 p.
30.
Isaacson, J. D., 1971, and Boyd, J. S., “Mathematical Analysis of Lateral Pressure in Flat‐Bottomed Deep Grain Bins,” ASAE, St. Joseph, Mich., Paper No. 64‐947, 1964.
31.
Janssen, H. A., “Versuche uber Getreidedruck in Silozellen,” Zeitschrift des Vereines Deutscher Ingenieure, 1895, pp. 1045.
32.
Janssen, H. A., “On the Pressure of Grain in Silos,” Minutes, Proceedings of Institute of Civil Engineering, Vol. 124, 1896, pp. 553–555.
33.
Jenike, A. W., and Johanson, J. R., “Bin Loads,” Journal of the Structural Division, ASCE, Vol. 94, No. ST4, Proc. Paper 5916, Apr., 1968, pp. 1011–1041.
34.
Jenike, A. W., and Johanson, J. R., “On the Theory of Bin Loads,” Journal of Engineering for Industry, Transactions ASME, Series B, Vol. 91, No. 2, 1969, p. 339.
35.
Jenike, A. W., Johanson, J. R., and Carson, J. W., “Bin Loads—Part 2: Concepts,” Journal of Engineering for Industry, Transactions ASME, Series B, Vol. 95, No. 1, 1973, p. 1.
36.
Jenike, A. W., Johanson, J. R., and Carson, J. W., “Bin Loads—Part 3: Mass‐Flow Bins,” Journal of Engineering for Industry, Transactions ASME, Series B, Vol. 95, No. 1, 1973, p. 6.
37.
Jenike, A. W., Johanson, J. R., and Carson, J. W., “Bin Loads—Part 4: Funnel Flow Bins,” Journal of Engineering foi Industry, Transactions ASME, Series B, Vol. 95, No. 1, 1973, p. 13.
38.
Jenike, A. W., “Denting of Circular Bins with Eccentric Drawpoints,” Journal of the Structural Division, ASCE, Vol. 93, No. ST1, Proc., Paper 5087, Feb., 1967, pp. 27–35.
39.
Jenike, A. W., “Storage and Flow of Solids,” Bulletin 123, Utah Engineering Experiment Station, University of Utah, Salt Lake City, Utah, Nov., 1964.
40.
Kelly, C. F., “1940, Research Work in Wheat Storage,” Agricultural Engineering, Vol. 21, No. 12, pp. 473–476.
41.
Lo, J., and Yip, B., “Pressure in Shallow Grain Bins,” Report of Fourth Year Project, Department of Civil Engineering, University of Windsor, Windsor, Ontario, Canada, 1978.
42.
Long, J. D., “Design of Grain Storage Structures,” Agricultural Engineering, Vol. 12, No. 7, July, 1931, pp. 274–275.
43.
Mahmoud, A. A., and Abdel‐Sayed, G., “Loading on Shallow Cylindrical Flexible Grain Bins,” International Conference on Design of Silos for Strength and Flow, University of Lancaster, England, Sept., 1980.
44.
Mahmoud, M. H., “Flowability and Overpressures in Grain Bins,” ASAE, St. Joseph, Mich., 1977, Paper No. 77‐4504.
45.
Mahmoud, M. H., and Bishara, A. G., “Finite Element Analysis of Deformation and Stress Histories in Farm Silos,” American Society Agricultural Engineers, Annual Meeting, Chicago, Ill., Dec. 15–18, 1975, Paper 75–4510, 10 pp.
46.
Manbeck, H. B., et al., “Dynamic Overpressures in Model Bins During Emptying,” presented at the Winter Meeting, American Society of Agricultural Engineers, Dec., 1977.
47.
Manbeck, H. B., “An Experimental Study of the Three Dimensional Stress‐Strain Behavior of Wheat En Masse,” thesis presented to the Oklahoma State University, at Stillwater, Okla., in 1970, in partial fulfillment of the requirements for the degree of Doctor of Philosopy.
48.
Manbeck, H. B., and Nelson, G. L., “Methods and Instrumentation for Evaluating the Stress‐Strain Behavior of Granular Media En Masse,” Transactions of ASAE, Vol. 15, No. 5, 1972, pp. 919–923.
49.
Manbeck, H. B., and Nelson, G. L., “Three Dimensional Constitutive Equations for Wheat En Masse,” Transactions of ASAE, Vol. 18, No. 6, 1975, pp. 1122–1127.
50.
Manbeck, H. B., “Predicting Thermally Induced Pressures in Grain Bins,” ASAE 1982 Summer Meeting, ASAE, Madison, Wisc., June, 1982, Paper No. 28‐4070.
51.
Myers, K. F., “Overpressures in Bolted Steel Grain Bins Due to Ambient Temperature Fluctuations,” thesis presented to Ohio State University at Columbus, Ohio, in 1974, in partial fulfillment of the requirements for the degree of Master of Science.
52.
Narayan, C. V., and Bilanski, W. K., “Behavior Under High Pressure of Wheat Grains in Bulk,” presented at the 1966 Winter Meeting of ASAE, Dec., 1966, Paper No. 66‐806.
53.
National Building Code of Canada, issued by the Associate Committee on the National Building Code, National Research Council, Ottawa, Canada, 1965 and 1977.
54.
Moysey, E. B., “Prediction of Pressure in Deep Bins During Emptying,” ASAE, St. Joseph, Mich., Paper No. 77‐4506, 1977.
55.
Pieper, K., and Wenzel, F., “Pressure Conditions in Silos,” W. Ernst and John, Berlin, Germany, 1964.
56.
Purdy, D. M., Maher, F. J., and Fredrick, D., “Model Studies of Wind Loads on Flat‐Top Cylinders,” Journal of the Structural Division, ASCE, Vol. 93, No. ST2, Proc. Paper 5209, Apr., 1967, pp. 379–395.
57.
Reimbert, M., and Reimbert, A., “Silos: Theory and Practice,” Trans Tech Publications, 1976.
58.
Rish, R. F., “Forces in Cylindrical Shells Due to Wind,” Proceedings, Institution of Civil Engineers, Apr., 1967, pp. 791–803.
59.
Ross, I. J., et al., “Grain Bin Loads as Affected by Grain Moisture Content and Vertical Pressure,” ASAE Winter Meeting, Chicago, Ill., Dec. 13–16, 1977, Paper No. 77‐4507.
60.
Ross, I. J., et al., “Effect of Compressibility in Storage Capacity and Pressure,” ASAE, St. Joseph, Mich., Paper No. 77‐4507.
61.
Sagita, M., “Flow and Pressures of Noncohesive Granular Materials in Funnel‐Flow Bins,” ASME Meeting, Sept. 17–20, 1972, Paper No. 72‐MH‐20, 8 pp.
62.
Saul, R. A., “Measurement of Grain Pressures on Bin Walls and Floors,” Agricultural Engineering, Vol. 34, No. 4, Apr., 1953, pp. 231–234.
63.
Spangler, H., and Handy, R., “Soil Engineering,” 3rd ed., Harper & Row Publisher, New York, N.Y., 1973.
64.
Stewart, B. R., “Active & Passive Wall Pressures Induced by Sorghum Grain in a Shallow Bin,” Transactions, American Society of Agricultural Engineers, Vol. 15, No. 1, 1972, pp. 121–125.
65.
Stewart, B. R., “The Effect of Lateral Wall Deformation on Pressures Induced by a Granular Cohensionless Material in a Shallow Bin,” thesis presented to Texas A&M University, in 1966, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
66.
Smith, D. L. O., “Triaxial Load Response of Grain,” thesis presented to Iowa State University, in 1981, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
67.
Thompson, S. A., and Ross, I. J., “Thermal Stresses in Steel Grain Bins Using the Tangent Modulus of Grain,” ASAE 1982 Summer Meeting, June, 1982, Madison, Wisc., Paper No. 82‐4069.
68.
Thompson, S. A., “Physical Properties of Wheat and Its Relationship to Vertical Wall Loads in Grain Bins,” thesis presented to University of Kentucky, at Lexington, Ky., in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
69.
Trepanier, P. J., “Field Research on Armco Storage Buildings,” Proceedings, Eighth Annual Grain Drying and Storage Conference, Texas Tech University, Lubbock, Tex., 1962, pp. 66–68.
70.
Weiland, W. F., “Why Grain Storage Structures Fail,” 7th Annual Grain Drying and Storage Conference, Texas Tech College, Lubbock, Tex., Feb. 22–23, 1961, pp. 31–32.
71.
Weiland, W. F., “Structural Failures of Grain Storage Facilities,” Transactions of the ASAE, 1964, pp. 130–133.
72.
Wickstorm, L. L., “Grain Bins—Static Pressures Due to Nonsymmetrical Cleanout,” ASAE Summer Meeting, Madison, Wisc., June, 1982, Paper No. 82‐4071.
Information & Authors
Information
Published In
Copyright
Copyright © 1985 ASCE.
History
Published online: Oct 1, 1985
Published in print: Oct 1985
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.