Nonlinear Analysis of Sheathed Wood Diaphragms
Publication: Journal of Structural Engineering
Volume 110, Issue 9
Abstract
A finite element model for predicting the quasi‐static load‐deflection behavior of diaphragms is presented. A fastener compliance element derived from nonlinear nail load‐slip properties is deployed. The model is formulated for the general case and does not impose restrictions on sheathing arrangements, load application, and geometry of distorted diaphragms. The method is verified using experimental tests where good agreements have been obtained.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
American Society of Testing and Materials, “Standard Methods of Conducting Strength Tests of Panels for Building Construction,” ASTM Designation E 72–77.
2.
Atherton, G. H., Rowe, K. E., and Bastendroff, Ken M., “Damping and Slip of Nailed Joints,” Wood Science, Vol. 12, No. 4, Apr., 1980.
3.
Atherton, G. H., “Strength and Stiffness of Structural Particle‐board Diaphragms,” Report of Project 818‐151A, Forest Research Laboratory, Oregon State Univ., Oct., 1981.
4.
Bathe, K. J., Ozdemir, H., and Wilson, E. L., “Static and Dynamic Geometric and Material Nonlinear Analysis,” Structural Engineering Laboratory, Report No. UC‐SESM 74‐4, Department of Civil Engineering, Univ. of California, Berkeley, Feb., 1974.
5.
Bathe, K. J., Wilson, E. L., and Iding, R. H., “NONSAP‐A Structural Analysis Program for Static and Dynamic Response of Nonlinear Systems,” Structural Engineering Laboratory, Report No. UC‐SESM 73‐3, Department of Civil Engineering, Univ. of California, Berkeley, Feb., 1974.
6.
Carney, J. M., “Bibliography on Wood and Plywood Diaphragms,” Journal of the Structural Division, ASCE, ST11, Nov., 1975, pp. 2423–2436.
7.
DeBonis, A. L., and Bodig, J., “Nailed Wood Joints Under Combined Loading,” Wood Science and Technology, Vol. 9, 1975.
8.
Easley, J. T., Foomani, M., and Dodds, R. H., “Formulas for Wood Shear Walls,” Journal of the Structural Division, ASCE, No. ST11, Nov., 1982, pp. 2460–2478.
9.
Elliott, J. R., “Wood Diaphragm Testing—Past, Present, Planned,” Proceedings of a Workshop on Design of Horizontal Wood Diaphragms, Applied Technology Council, Nov., 19–20, 1979.
10.
Foschi, R. O., “The Load‐Slip Characteristics of Nails,” Wood Science, Vol. 7, No. 1, 1974.
11.
Foschi, R. O., and Bonac, T., “Load‐Slip Characteristics for Connections with Common Nails,” Wood Science, Vol. 9, No. 3, Jan., 1977.
12.
Foschi, R. O., “Analysis of Wood Diaphragms and Trusses—Part I: Diaphragms,” Canadian Journal of Civil Engineering, Vol. 4, No. 3, 1977, pp. 345–352.
13.
Foschi, R. O., “Performance Evaluation of Shear Walls, and Diaphragms with Waferboard Sheathing,” a report to the Canadian Waferboard Association by Forintek Canada Corp., Dec., 1982.
14.
GangaRao, H. V. S., and Luttrell, L. D., “Preliminary Investigation into the Response of Timber Diaphragms,” ongoing research report presented in Proceedings of a Workshop on Design of Horizontal Wood Diaphragms, Applied Technology Council, 1979.
15.
GangaRao, H. V. S., Luttrell, L. D., and Putcha, C., “Seismic Design Studies of Timber Diaphragms in Low‐Rise Buildings,” ongoing research report presented in ASCE 1980 Spring Session in Porland, Oreg., 1980.
16.
Hirashima, Y., Kamiya, F., Hatayama, Y., and Kanaya, N., “Studies on Wood‐Panel Construction (II)—Loading Test of Full‐Scale House,” Bull. For. and For. Prod. Res. Inst., No. 315, 1981, Japan.
17.
Itani, R. Y., Tuomi, R. L., and McCutcheon, W. J., “Methodology to Evaluate Racking Resistance of Nailed Walls,” Forest Products Journal, Vol. 32, No. 1, Jan., 1982, pp. 30–36.
18.
Kamiya, F., Hirashima, Y., Hatayama, Y., and Kanaya, N., “Studies on Wood‐Panel Construction (I)—Effect on Racking Resistances of Bearing Wall due to Testing Methods and Wall Length,” Bull. For. and For. Prod. Res. Inst., No. 315, 1981, Japan.
19.
Neisel, R. H., and Guerrera, J. F., “Racking Strength of Fiberboard Sheathing,” Tappi, Vol. 39, No. 9, Sept., 1956.
20.
Neisel, R. H., “Racking Strength and Lateral Nail Resistance of Fiberboard Sheathing,” Tappi, Vol. 41, No. 12, Dec., 1958.
21.
Price, E. W., and Gromala, D. S., “Racking Strength of Walls Sheathed with Structural Flakeboards Made from Southern Species,” Forest Products Journal, Vol. 30, No. 12, Dec., 1980.
22.
Structural Fibrous Material Committee, “Racking Strength of Structural Insulation Board,” Tappi, Vol. 49, No. 3, Mar., 1966.
23.
Tuomi, R. L., and McCutcheon, W. J., “Testing of a Full‐Scale House under Simulated Snow Loads and Wind Loads,” USDA For. Serv. Res. Pap. FPL 234, For. Prod. Lab., Madison, Wisc., 1974.
24.
Tuomi, R. L., and Gromala, D. S., “Racking Strength of Walls: Let‐in Corner Bracing, Sheet Materials, and Effect of Loading Rate,” USDA Forest Serv. Res. Pap. FPL 301, Forest Prod. Lab., Madison, Wisc., 1977.
25.
Tuomi, R. L., and McCutcheon, W. J., “Racking Resistance of Light‐Framed Nailed Walls,” Journal of the Structural Division, ASCE, Vol. 104, No. ST7, July, 1978, pp. 1131–1140.
26.
Welsch, G. J., “Racking Strength of Half‐Inch Fiberboard Sheathing,” Tappi, Vol. 46, No. 8, Aug., 1963.
Information & Authors
Information
Published In
Copyright
Copyright © 1984 ASCE.
History
Published online: Sep 1, 1984
Published in print: Sep 1984
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.