Local Buckling of W Shape Columns and Beams
Publication: Journal of Structural Engineering
Volume 110, Issue 6
Abstract
An analytical method, previously developed and programmed for computer use, is used to carry out an extensive study of the various parameters affecting the local buckling behavior of W shape columns and beams. The effects of flange and web interaction, residual stresses, plate geometry, and inelastic action are included in the study. Specific parameters investigated include web slenderness, flange slenderness, yield stress, residual stress, strain‐hardening modulus, and member length. Local buckling curves of critical loads versus web slenderness are presented for various values of flange slenderness for beams and columns. The results of the study indicate that the present values of flange slenderness (260) and web slenderness (670), as presently specified for columns in the Canadian Standard, CAN3‐S16.1‐M78, are inappropriate. Values of flange slenderness (189) and web slenderness (788) are indicated. The results also show that the presently specified values of flange slenderness (260) and web slenderness (1,810) for Class 3 (non‐compact) sections may be too liberal with respect to the flanges and conservative with respect to the web. Values of flange slenderness (189) and web slenderness (2,100) are indicated by the study. The effects of all the parameters investigated during the study are shown in the form of local buckling curves as described here.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Akay, H. V., Johnson, C. P., and Will, K. M., “Lateral and Local Buckling of Beams and Frames,” Journal of the Structural Division, ASCE, Vol. 103, No. ST9, Paper 3226, Sept., 1977, pp. 1821–1832.
2.
Bijlaard, P. P., “Theory and Tests on the Plastic Stability of Plates and Shells,” Journal of Aeronautical Science, Vol. 16, Sept., 1949, pp. 529–541.
3.
Bleich, F., “Buckling Strength of Metal Structures,” McGraw‐Hill Book Co., Inc., New York, N.Y., 1952.
4.
Dawe, J. L., “Local Buckling of W Shapes Used as Columns, Beams, and Beam‐Columns,” dissertation presented to the University of Alberta, Edmonton, Alberta, in Oct., 1980, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
5.
Dawe, J. L., and Kulak, G. L., “Plate Instability of W Shapes,” Journal of the Structural Division, ASCE, Vol. 110, No. ST6, Paper 18956, June, 1984.
6.
Fung, Y. C., “Foundations of Solid Mechanics,” Prentice‐Hall, Inc., Englewood Cliffs, N.J., 1965.
7.
Galambos, T. V., “Structural Members and Frames,” Prentice‐Hall, Inc., Englewood Cliffs, N.J., 1968.
8.
Galambos, T. V., and Ravindra, M. K., “Properties of Steel for Use in LRFD,” Journal of the Structural Division, ASCE, Vol. 104, No. ST9, Sept., 1978, pp. 1459–1468.
9.
Goldberg, J. E., Bogdanoff, J. L., and Glauz, W. D., “Lateral and Torsional Buckling of Thin‐walled Beams,” Proceedings, IABSE, Vol. 24, 1964, pp. 91–100.
10.
“Guide to Stability Design Criteria for Metal Structures,” 3rd ed., B. G. Johnston, ed., John Wiley and Sons, New York, N.Y., 1976.
11.
Haaijer, G., and Thurlimann, B., “On Inelastic Buckling in Steel,” Journal of Engineering Mechanics, ASCE, Vol. 84, No. EM2, Apr., 1958.
12.
Hancock, G. J., “Local, Distortional, and Lateral Buckling of I‐Beams,” Journal of the Structural Division, ASCE, Vol. 104, No. ST11, Nov., 1978, pp. 1787–1798.
13.
Handleman, G. H., and Prager, W., “Plastic Buckling of a Rectangular Plate Under Edge Thrusts,” National Advisory Council for Aeronautics, Technical Note No. 1530, Aug., 1948.
14.
“Handbook of Structural Stability,” Construction Research Council, Japan, Corona Publishing Co., Tokyo, Japan, 1971.
15.
Holtz, N. M., and Kulak, G. L., “Web Slenderness Limits for Compact Beams,” Structural Engineering Report No. 43, Dept. of Civ. Engrg., Univ. of Alberta, Mar., 1973.
16.
Holtz, N. M., and Kulak, G. L., “Web Slenderness Limits of Non‐Compact Beams,” Structural Engineering Report No. 51, Dept. of Civ. Engrg., Univ. of Alberta, Aug., 1975.
17.
Ilyushin, A. A., “Stability of Plates and Shells Beyond the Proportional Limit,” National Advisory Council for Aeronautics, Technical Memorandum No. 116, Oct., 1947.
18.
Kroll, W. D., Fisher, G. P., and Heimerl, G. J., “Charts for the Calculation of the Critical Stress for Local Instability of Columns with I, Z, Channel, and Rectangular Tube Sections,” NACA Wartime Rep., No. L‐429, Nov., 1943.
19.
Lukey, A. F., and Adams, P. F., “Rotation Capacity of Beams Under Moment Gradient,” Journal of the Structural Division, ASCE, Vol. 95, No. ST6, June, 1969.
20.
McGuire, W., “Steel Structures,” Prentice‐Hall, Inc., Englewood Cliffs, N.J., 1968.
21.
Nash, D. S., and Kulak, G. L., “Web Slenderness Limits for Non‐Compact Beam‐Columns,” Structural Engineering Report No. 53, Dept. of Civ. Engrg., Univ. of Alberta, Mar., 1976.
22.
Onat, E. T., and Drucker, D. C., “Inelastic Instability and Incremental Theories of Plasticity,” Journal of Aeronautical Sciences, Vol. 20, Mar., 1953, p. 181.
23.
Perlynn, M. J., and Kulak, G. L., “Web Slenderness Limits for Compact Beam—Columns,” Structural Engineering Report No. 50, Dept. of Civ. Engrg., Univ. of Alberta, Sept., 1974.
24.
Plank, R. J., and Wittrick, W. H., “Buckling Under Combined Loading of Thin, Flat‐Walled Structures by a Complex Finite Strip Method,” International Journal of Numerical Methods in Engineering, Vol. 8, No. 2, 1974, pp. 323–339.
25.
Przemieniecki, J. S., “Finite Element Structural Analysis of Local Stability,” American Institute of Aeronautics and Astronautics Journal, Vol. 11, No. 1, Jan., 1973.
26.
Rajasekaran, S., and Murray, D. W., “Coupled Local Buckling in Wide‐Flange Beam‐Columns,” Journal of the Structural Division, ASCE, Vol. 99, No. ST6, Paper 9774, June, 1973, pp. 1003–1023.
27.
Stowell, E. Z., “A Unified Theory of Plastic Buckling of Columns and Plates,” National Advisory Council for Aeronautics, Technical Note No. 1556, 1948.
28.
“Specification for the Design, Fabrication and Erection of Structural Steel for Buildings,” American Institute of Steel Construction, 1969.
29.
“Steel Structures for Buildings—Limit States Design,” CAN3‐S16.1‐M78, Canadian Standards Assoc., 1978.
30.
“Structural Steel Design,” 1st ed., Lambert Tall, ed., The Ronald Press Company, New York, N.Y., 1964.
31.
Timoshenko, S., “Stability of Webs of Plate Girders,” Engineering, Vol. 138, 1934, p. 207.
32.
Timoshenko, S., and Gere, J., “Theory of Elastic Stability,” 2nd ed., McGraw‐Hill Book Co., Inc., New York, N.Y., 1961.
33.
Thurlimann, B., “New Aspects Concerning Inelastic Instability of Steel Structures,” Journal of the Structural Division, ASCE, Vol. 86, No. ST1, 1960, pp. 99–120.
Information & Authors
Information
Published In
Copyright
Copyright © 1984 ASCE.
History
Published online: Jun 1, 1984
Published in print: Jun 1984
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.