Moment‐Curvature Expressions for Fabricated Tubes
Publication: Journal of Structural Engineering
Volume 110, Issue 11
Abstract
The behavior of fabricated tubes is far more complicated than that of hot‐rolled tubes because of out‐of‐roundness and residual stresses introduced during the process of fabrication. In deepwater platforms, the capacity of fabricated tubular members may be reduced significantly by external hydrostatic pressure. A rigorous numerical analysis of even an individual member requires considerable computer time, which can be reduced significantly by using closed‐form curve‐fitting expressions for the moment‐curvature relationship. In this paper, the results of rigorous numerical analysis are used to develop closed‐form moment‐curvature expressions for a fabricated tubular crosssection subjected to a given value of axial force and external pressure. As an example, these closed‐form expressions, combined with similar expressions for axial stiffness, are used to analyze a fabricated tubular cantilever beam at a depth of 800 ft of water. The finite element approach, coupled with the tangent stiffness procedure, is employed in the analysis. Due to external pressure, the capacity of the beam is reduced by 15%.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bisshopp, K. E., and Drucker, D. C., “Large Deflection of Cantilever Beams,” Quarterly of Applied Mathematics, Vol. 3, 1945, pp. 272–275.
2.
Chen, W. F., “Further Studies of Inelastic Beam‐Column Problems,” Journal of the Structural Division, ASCE, Vol. 97, No. ST2, Feb., 1971, pp. 529–544.
3.
Chen, W. F., and Ross, D. A., “The Axial Strength and Behaviour of Cylinderical Columns,” OTC Paper No. 2683, Eighth Annual Offshore Technology Conference, Houston, Tex., May, 1976, pp. 741–754.
4.
Chen, W. F., and Atsuta, T., Theory of Beam‐Columns—In Plane Behaviour and Design, Vol. 1, McGraw‐Hill, New York, N.Y., 1976.
5.
Chen, W. F., and Atsuta, T., Theory of Beam‐Columns—Space Behaviour and Design, Vol. 2, McGraw‐Hill, New York, N.Y., 1977.
6.
Chen, W. F., and Ross, D. A., “Test of Fabricated Tubular Columns,” Journal of the Structural Division, ASCE, Vol. 103, No. ST3, Mar., 1977, pp. 619–634.
7.
Chen, W. F., and Toma, S., “Effect of External Pressure on the Axial Capacity of Fabricated Tubular Columns,” Report to Exxon Production Research Company, Houston, Tex., Jan., 1979.
8.
Han, D. J., and Chen, W. F., “Cyclic Inelastic Behaviour of Steel Tubular Beam‐Columns,” Report No. CE‐STR‐81‐33, School of Civil Engineering, Purdue University, West Lafayette, Ind., Sept., 1981.
9.
Han, D. J., and Chen, W. F., “Behaviour of Portal and Strut‐Types of Beam‐Columns,” Engineering Structure, Vol. 5, Jan., 1983, pp. 15–26.
10.
Han, D. J., and Chan, W. F., “Buckling and Cyclic Inelastic Analysis of Steel Tubular Beam‐Columns,” Engineering Structure, Vol. 5, Apr., 1983, pp. 119—132.
11.
Saleeb, A. F., “Near Bottom Bend of Flowlines,” thesis presented to the School of Civil Engineering, Purdue University, at West Lafayette, Ind., in May, 1979, in partial fulfillment of the requirements for the degree of Master of Science.
12.
Saleeb, A. F., and Chen, W. F., “Elastic‐Plastic Large Displacement Analysis of Pipes,” Journal of the Structural Division, ASCE, Vol. 107, No. ST4, Apr., 1981, pp. 605–626.
13.
Sohal, I. S., “Large Bending of Pipes,” thesis presented to the School of Civil Engineering, Purdue University, at West Lafayette, Ind., in Aug., 1983, in partial fulfillment of the requirements for the degree of Master of Science.
14.
“Specifications for Fabricated Structural Steel Pipes,” API Specification 2B, American Petroeum Institute, Oct., 1972.
15.
Timoshenko, S. P., and Gere, J. M., “Theory of Elastic Stability,” McGraw‐Hill, New York, N.Y., 1961.
16.
Toma, S., and Chen, W. F., “Analysis of Fabricated Tubular Columns,” Journal of the Structural Division, ASCE, Vol. 105, No. ST11, Paper 14994, Nov., 1979, pp. 2343–2366.
17.
Toma, S., “Analysis and Design of Fabricated Tubular Beam‐Columns,” thesis presented to the School of Civil Engineering, Purdue University, at West Lafayette, Ind., in Dec., 1980, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
18.
Toma, S., Chan, W. F., and Finn, L. D., “External Pressure and Sectional Behavior of Fabricated Tubes,” Journal of the Structural Division, ASCE, Vol. 108, No. ST1, Paper 16797, Jan., 1982, pp. 177–194.
Information & Authors
Information
Published In
Copyright
Copyright © 1984 ASCE.
History
Published online: Nov 1, 1984
Published in print: Nov 1984
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.