Welded Box Compression Members
Publication: Journal of Structural Engineering
Volume 110, Issue 10
Abstract
An experimental and theoretical study is presented on the strength of welded box compression members of high strength steel. The member cross sections are composed of plates with relatively large width‐thickness ratios so that local plate buckling is supposed to occur before the attainment of the overall member buckling. A total of 25 members of various lengths, width‐thickness ratios and cross‐sectional shapes (square or rectangular box) were tested to failure under bending as well as under concentric or eccentric axial loading. In the theoretical study a computer program has been developed, based on the effective width concept, to trace up to collapse the load‐deformation characteristics of locally buckled beam‐columns. By comparing the experimental and theoretical results it has been found that the agreement is reasonably good in the columns with large width‐thickness ratios.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Specifications for the Design, Fabrication and Erection of Structural Steel for Buildings, American Institute of Steel Construction, 8th Ed., New York, N.Y., 1980.
2.
Bijlaard, P. P., and Fisher, G. P., “Column Strength of H‐Sections and Square Tubes in Post‐buckling Range of Component Plates,” National Advisory Committee for Aeronautics TN 2994, Aug., 1953.
3.
Cook, R. D., “Concepts and Applications of Finite Element Analysis,” 2nd Ed., John Wiley and Sons, New York, N.Y., 1981.
4.
DeWolf, J. T., Pekoz, T., and Winter, G., “Local and Overall Buckling of Cold‐Formed Members,” Journal of the Structural Division, ASCE, Vol. 100, No. ST10, Oct., 1974, pp. 2017–2036.
5.
Dwight, J. B., “Collapse of Steel Compression Panels,” Developments in Bridge Design and Construction, Crosby Lockwood & Son LTD, London, England, 1971, pp. 519–539.
6.
Graves, Smith, T. R., “The Post‐Buckled Strength of Thin‐Walled Columns,” Final Report of the Eighth Congress, International Association for Bridge and Structural Engineering, New York, N.Y., 1968, pp. 311–320.
7.
Hancock, G., “Interaction Buckling in I‐Section Columns,” Journal of the Structural Division, ASCE, Vol. 107, No. ST1, Paper 15978, Jan., 1981, pp. 165–179.
8.
Hancock, G., “Nonlinear Analysis of Thin Sections in Compression,” Journal of the Structural Division, ASCE, Vol. 107, No. ST3, Paper 16090, Mar., 1981, pp. 455–471.
9.
Johnston, B. G., ed., Guide to Stability Design Criteria for Metal Structures, 3rd Ed., John Wiley and Sons, New York, N.Y., 1976.
10.
Kalyanaraman, V., Pekoz, T., and Winter, G., “Unstiffened Compression Elements,” Journal of the Structural Division, ASCE, Vol. 103, No. ST9, Paper 13197, Sept., 1977, pp. 1833–1848.
11.
König, J., and Thomasson, P.‐O., “Thin‐Walled C‐Shaped Panels Subject to Axial Compression or to Pure Bending,” in Thin Walled Structures, J. Rhodes and A. C. Walker, eds., Granada, London, England, 1980, pp. 735–751.
12.
Little, G. H., “The Strength of Square Steel Box Columns—Design Curves and their Theoretical Basis,” The Structural Engineer, Vol. 57, Feb., 1979, pp. 49–61.
13.
Nishino, F., “Buckling Strength of Columns and Their Component Plates,” thesis presented to Lehigh University, at Bethlehem, Pa., in 1964, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
14.
Skaloud, M., and Naprstek, J., “Limit State of Compressed Thin‐Walled Steel Columns with Regard to the Interaction between Column and Plate Buckling,” Second International Colloquium on Stability of Steel Structures, Liege, Apr., 1977, pp. 405–414.
15.
Usami, T., and Fukumoto, Y., “Local and Overall Buckling of Welded Box Columns,” Journal of the Structural Division, ASCE, Vol. 108, No. ST3, Paper 16944, Mar., 1982, pp. 525–542.
16.
Usami, T., “Post‐Buckling of Plates in Compression and Bending,” Journal of the Structural Division, ASCE, Vol. 108, No. ST3, Paper 16943, Mar., 1982, pp. 591–609.
17.
Vilnay, O., and Rockey, K. C., “A Generalized Effective Width Method for Plates Loaded in Compression,” Journal of Constructional Steel Research, Vol. 1, No. 3, May, 1981, pp. 3–12.
18.
Wang, S. T., “Nonlinear Analysis of Locally Buckled Thin‐Walled Structures,” Proceedings, International Conference on Computational Methods in Nonlinear Mechanics, Austin, Tex., 1974, pp. 809–818.
19.
Yoshida, H., and Maegawa, K., “Local and Member Buckling of H‐Columns,” Journal of Structural Mechanics, Vol. 6, No. 1, 1978, pp. 1–27.
20.
Yu, W. W., “Cold Formed Steel Structures,” McGraw‐Hill Book Co., New York, N.Y., 1973.
Information & Authors
Information
Published In
Copyright
Copyright © 1984 ASCE.
History
Published online: Oct 1, 1984
Published in print: Oct 1984
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.