Spacing of Cracks in Reinforced Concrete
Publication: Journal of Structural Engineering
Volume 109, Issue 9
Abstract
The spacing and width of cracks in a parallel crack system is approximately analyzed using the energy criterion of fracture mechanics as well as the strength criterion. The energy criterion indicates that the crack spacing is a function of the axial strain of the bars and also depends on bar spacing, bar diameter, fracture energy of concrete, and its elastic modulus. Both the energy and strength criteria yield a minimum strain necessary to produce any cracks. The energy criterion and the bond slip conditions further yield a lower bound on possible spacing of continuous cracks. The rules for the formation of shorter, partial length, cracks are also set up. Approximate expressions for the crack width at, and away, from the bars are derived. Numerical comparisons indicate satisfactory agreement with existing test data, and lend theoretical support to one aspect of the empirical Gergely‐Lutz formula obtained by statistical regression analysis of test data. Finally, formation of skew cracks in a biaxially stressed and biaxially reinforced plate is analyzed and a crack spacing formula is derived for one typical case.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Albandar, F. A‐A., and Mills, G. M., “The Prediction of Crack Widths in Reinforced Concrete Beams,” Magazine of Concrete Research, Vol. 26, No. 88, Sept., 1974, pp. 153–160.
2.
Base, G. D., Read, J. B., Beeby, A. W., and Taylor, H. P. J., “An Investigation of the Crack Control Characteristics of Various Types of Bar in Reinforced Concrete Beams,” Research Report No. 18, Parts 1, 2, Cement and Concrete Association, London, England, Dec., 1966.
3.
Bažant, Z. P., and Oh, B. H., “Concrete Fracture via Stress‐Strain Relations,” Report No. 81‐10/665, Center for Concrete and Geomaterials, Northwestern University, Evanston, Ill., Oct., 1981.
4.
Bažant, Z. P., and Oh, B. H., “Crack Spacing in Reinforced Concrete: Approximate Solution,” Journal of Structural Engineering, ASCE, Vol. 109, No. 9, Sept., 1983, pp. 2207–2212.
5.
Bažant, Z. P., and Oh, B. H., “Deformation of Cracked Net‐Reinforced Concrete Walls,” Journal of Structural Engineering, ASCE, Vol. 109, No. 1, Jan., 1983, pp. 93–108.
6.
Bažant, Z. P., and Ohtsubo, H., “Stability Conditions for Propagation of a System of Cracks in a Brittle Solid,” Mechanics Research Communications, Vol. 4, No. 5, Sept., 1977, pp. 353–366.
7.
Bažant, Z. P., and Raftshol, W. J., “Effect of Cracking in Drying and Shrinkage Specimens,” Cement and Concrete Research, 1982 (in press).
8.
Bažant, Z. P., and Wahab, A. B., “Instability and Spacing of Cooling on Shrinkage Cracks,” Journal of the Engineering Mechanics Division, ASCE, Vol. 105, No. EM5, Proc. Paper 14933, Oct., 1979, pp. 873–889.
9.
Bažant, Z. P., and Wahab, A. B., “Stability of Parallel Cracks in Solids Reinforced by Bars,” International Journal of Solids and Structures, Vol. 16, 1980, pp. 97–105.
10.
Bažant, Z. P., Ohtsubo, H., and Aoh, K., “Stability and Post‐Critical Growth of a System of Cooling or Shrinkage Cracks,” International Journal of Fracture, Vol. 15, No. 5, Oct. 1979, pp. 443–456.
11.
Broms, B. B., “Crack Width and Crack Spacing in Reinforced Concrete Members,” Journal of the American Concrete Institute, Proceedings, Vol. 62, No. 10, Oct., 1965, pp. 1237–1256.
12.
Broms, B. B., and Lutz, L. A., “Effects of Arrangement of Reinforcement on Crack Width and Spacing of Reinforced Concrete Members,” Journal of the American Concrete Institute, Proceedings, Vol. 62, No. 11, Nov., 1965.
13.
Chi, M., and Kirstein, A. F., “Flexural Cracks in Reinforced Concrete Beams,” Journal of the American Concrete Institute, Proceedings, Vol. 54, No. 10, Apr., 1958, pp. 865–878.
14.
Clark, A. P., “Cracking in Reinforced Concrete Flexural Member,” Journal of the American Concrete Institute, Proceedings, Vol. 52, No. 8, Apr., 1956, pp. 851–862.
15.
Fung, Y. C., Foundations of Solid Merchanics, Prentice Hall, Inc., Englewood Cliffs, N.J., 1965.
16.
Gergely, P., and Lutz, L. A., “Maximum Crack Width in Reinforced Concrete Flexural Members,” Causes, Mechanism, and Control of Cracking in Concrete, SP‐20, American Concrete Institute, Detroit, Mich., 1968, pp. 87–117.
17.
Hillerborg, A., Modéer, M., and Petersson, P. E., “Analysis of Crack Formation and Crack Growth in Concrete by Means of Fracture Mechanics and Finite Elements,” Cement and Concrete Research, Vol. 6, 1976, pp. 773–782.
18.
Hognestad, E., “High Strength Bars as Concrete Reinforcement, Part 2. Control of Flexural Cracking,” Journal of the Portland Cement Association Research and Development Laboratories, Vol. 4, No. 1, Jan., 1962, pp. 46–63.
19.
Kaar, P. H., and Hognestad, E., “High Strength Bars as Concrete Reinforcement, Part 7. Control of Cracking in T‐Beam Flanges,” Journal of the Portland Cement Association Research and Development Laboratories, Vol. 7, No. 1, Jan., 1965, pp. 42–53.
20.
Kaar, P. H., and Mattock, A. H., “High Strength Bars as Concrete Reinforcement, Part 4, Control of Cracking,” Journal of the Portland Cement Association Research and Development Laboratories, Vol. 5, No. 1, Jan., 1963, pp. 15–38.
21.
Knott, J. F., Fundamentals of Fracture Mechanics, Butterworths, London, England, 1973.
22.
Mathey, R. G., and Watstein, D., “Effect of Tensile Properties of Reinforcement on the Flexural Characteristics of Beams,” Journal of the American Concrete Institute, Proceedings, Vol. 56, No. 12, June, 1960, pp. 1253–1273.
23.
Meier, S. W., and Gergely, P., “Flexural Crack Width in Prestressed Concrete Beams,” Journal of the Structural Division, ASCE, Vol. 107, No. ST2, Proc. Paper 16010, Feb., 1981, pp. 429–433.
24.
Nawy, E. G., “Crack Control in Reinforced Concrete Structures,” Journal of the American Concrete Institute, Proceedings, Vol. 65, No. 10, Oct., 1968, pp. 825–836.
25.
Park, R., and Paulay, T., Reinforced Concrete Structures, John Wiley and Sons, New York, N.Y., 1975 (Section 10.4).
26.
Petersson, P. E., “Fracture Energy of Concrete: Method of Determination,” Cement and Concrete Research, Vol. 10, 1980, pp. 78–89,
and “Fracture Energy of Concrete: Practical Performance and Experimental Results,” Cement and Concrete Research, Vol. 10, 1980, pp. 91–101.
27.
Sneddon, I. N., and Lowengrub, M., Crack Problems in the Classical Theory of Elasticity, John Wiley and Sons, New York, N.Y., 1969 (p. 134).
28.
Tada, H., Paris, P. C., and Irwin, G. R., “The Stress Analysis of Cracks Handbook,” Del Research Corp., Hellertown, Pa., 1973.
29.
Watstein, D., and Mathey, R. G., “Width of Cracks in Concrete at the Surface of Reinforcing Steel Evaluated by Means of Tensile Bond Specimens,” Journal of the American Concrete Institute, Proceedings, Vol. 56, No. 1, July, 1959, pp. 47–56.
30.
Watstein, D., and Parsons, D. E., “Width and Spacing of Tensile Cracks in Axially Reinforced Concrete Cylinders,” Journal of Research of the National Bureau of Standards, Vol. 31, July, 1943, No. RP545, pp. 1–24.
Information & Authors
Information
Published In
Journal of Structural Engineering
Volume 109 • Issue 9 • September 1983
Pages: 2066 - 2085
Copyright
Copyright © 1983 ASCE.
History
Published online: Sep 1, 1983
Published in print: Sep 1983
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.