Discussion of “Local and Overall Buckling of Welded Box Columns” by Tsutorrm Usami and Yuhshi Fukumoto (March, 1982)
This article is a reply.
VIEW THE ORIGINAL ARTICLEThis article has a reply.
VIEW THE REPLYPublication: Journal of Structural Engineering
Volume 109, Issue 5
0733-9445(1983)109:5(1314)/asset/8765e883-6ae3-4b50-a3f2-d83f2420f373/assets/(asce)0733-9445(1983)109:5(1314).fp.png)
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Annamalai, N., Lewis, A. D. M., and Goldberg, J. E., “Cost Optimization of Welded Plate Girders,” Journal of the Structural Division, ASCE, Vol. 98, No. ST10, Oct., 1972, pp. 2235–2246.
2.
Code of Practice for Design of Steel Bridges, BS 5400: Part 3: 1982, British Standards Institution, 1982.
3.
Farkas, J., “The Effect of Residual Welding Stresses on the Buckling Strength of Compressed Plates,” Proceedings, Regional Colloquium on Stability of Steel Structures, Budapest, Hungary, 1977, pp. 299–306.
4.
Farkas, J., “Optimum Design of Compressed Columns of Constant Welded Square Box Cross Section Considering the Effect of Residual Welding Stresses,” Acta Technica Academiae Scientiarum Hungaricae, Tomus 84, 1977, pp. 335–348.
5.
Farkas, J., “Optimum Design of Metal Structures by Backtrack Programming,” Final Report of the 11th Congress, International Association for Bridge and Structural Engineering, Vienna, Austria, 1980, pp. 597–602.
6.
Farkas, J., and Szabó, L., “Optimum Design of Welded Beams and Frames of Welded I‐Sections by Means of Backtrack Programming Method,” Acta Technica Academiae Scientiarum Hungaricae, Tomus 91, 1980, pp. 121–135.
7.
Farkas, J., “Optimal Design of Compressed Columns of Square Box Cross‐Section,” submitted for publication to the Journal of Constructional Steel Research.
8.
Faulkner, D., Adamczak, J. C., Snyder, G. J., and Vetter, M. F., “Synthesis of Welded Grillages to Withstand Compression and Normal Loads,” Computers & Structures, Vol. 3, No. 2, Mar., 1973, pp. 221–246.
9.
Vilnay, O., and Rockey, K. C., “A Generalised Effective Width Method for Plates Loaded in Compression,” Journal of Constructional Steel Research, Vol. 1, No. 3, May, 1981, pp. 3–12.
Information & Authors
Information
Published In
Journal of Structural Engineering
Volume 109 • Issue 5 • May 1983
Pages: 1314 - 1316
Copyright
Copyright © 1983 ASCE.
History
Published online: May 1, 1983
Published in print: May 1983
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.