Collapse Loads of Nonprestressed R/C Curved Beams
Publication: Journal of Structural Engineering
Volume 109, Issue 4
Abstract
A general method of collapse load analysis was proposed by the writers in an earlier paper for reinforced concrete indeterminate frames in which the members are subjected to combined bending, torsion, and shear. The application of the method to the case of fixed‐ended beams, curved in plan and subjected to a point load, is described in this paper in detail. The theoretical predictions are then compared with the writers' test data as well as those available in the literature. In general, the method gives a good prediction of the behavior and strength of reinforced concrete (nonprestressed) curved beams at collapse.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Badawy, H. E. I., Jordaan, I. J., and McMullen, A. E., “Effect of Shear on Collapse of Curved Beams,” Journal of the Structural Division, ASCE, Vol. 103, No. ST9, Proc. Paper 13185, Sept., 1977, pp. 1849–1866.
2.
Badawy, H. E. I., McMullen, A. E., and Jordaan, I. J., “Experimental Investigation of the Collapse of Reinforced Concrete Curved Beam,” Magazine of Concrete Research, Vol. 29, No. 99, June, 1977, pp. 59–69.
3.
Collins, M. P., Walsh, P. F., Archer, F. E., and Hall, A. S., “Ultimate Strength of Reinforced Concrete Beams Subjected to Combined Torsion and Bending,” Publication SP‐18, Torsion of Structural Concrete, American Concrete Institute, Detroit, Mich., 1968, pp. 379–402.
4.
Hall, A. S., and Archer, F. E., “The Strength of Reinforced Concrete Beams in Torsion, Bending and Shear,” UNICIV Report No. R‐60, University of New South Wales, Kensington, Australia, Nov., 1970.
5.
Hsu, T. C. C., Inan, M., and Fonticiella, L., “Behavior of Reinforced Concrete Horizontally Curved Beams,” American Concrete Institute Journal, Vol. 75, No. 4, Apr., 1978, pp. 112–122.
6.
Jordaan, I. J., Khalifa, M. A., and McMullen, A. E., “Collapse of Curved Reinforced Concrete Beams,” Journal of the Structural Division, ASCE, Vol. 100, No. ST11, Proc. Paper 10951, Nov., 1974, pp. 2255–2269.
7.
Mansur, M. A., and Rangan, B. V., “A Lower‐Bound Analysis for Torsion in Concrete Frames,” Magazine of Concrete Research, Vol. 29, No. 101, London, England, Dec., 1977, pp. 191–198.
8.
Mansur, M. A., and Rangan, B. V., “Study of Design Methods for Reinforced Concrete Curved Beams,” American Concrete Institute Journal, Vol. 87, No. 3, May–June, 1981, pp. 226–231.
9.
Ramakrishnan, V., and Ananthanarayana, Y., “Tests to Failure in Bending and Torsion of Reinforced Concrete Bents,” American Concrete Institute Journal, Vol. 66, No. 5, May, 1969, pp. 428–431.
10.
Rangan, B. V., and Hall, A. S., “Strength of Rectangular Prestressed Concrete Beams in Combined Torsion, Bending and Shear,” American Concrete Institute Journal, Vol. 70, No. 4, Apr., 1973, pp. 270–278.
11.
Rangan, B. V., Staley, R. F., and Hall, A. S., “Behavior of Concrete Beams in Torsion and Building,” Journal of the Structural Division, ASCE, Vol. 103, No. ST4, Proc. Paper 12864, Apr., 1977, pp. 759–772.
12.
“SAA Concrete Structures Code‐Metric,” AS1480 Standards Association of Australia, 1974.
13.
“Tentative Recommendations for the Design of Reinforced Concrete Members to Resist Torsion,” American Concrete Institute Journal, ACI Committee 438 Report, Vol. 66, No. 1, Jan., 1969, pp. 1–8.
Information & Authors
Information
Published In
Copyright
Copyright © 1983 ASCE.
History
Published online: Apr 1, 1983
Published in print: Apr 1983
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.