Shearing Stress in Plastic Bending of Wood Beams
Publication: Journal of Structural Engineering
Volume 109, Issue 4
Abstract
The shearing stress analysis of glue‐laminated wood beams in the elastic‐plastic range is presented, and the theoretical method for calculating the ultimate shearing stresses is developed. The validity of the theoretical method was verified by a test program using 16 models. The test results support the theoretical prediction. It is proved that the elastic theory on which the present design criteria of bending wood beams are based does not explain adequately the true structural behavior of wood beams in the elastic‐plastic range. This theory is verified through tests of glue‐laminated wood beams of defect‐free material and of commercial quality. The theory is proved for beams of defectfree material, and it is of significant value since it makes it possible to compute the shearing stress for a fully plastic case under ultimate load.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bach, C., and Baumann, R., “Bigungsfersuche,” Elastizität und Festigkeit, Neunte Auflage, 9 ed., Verlag von Julius Springer, Berlin, Germany, 1924, pp. 305–308.
2.
Bechtel, S. C., and Norris, C. B., “Strength of Wood Beams of Rectangular Cross Section as Affected by Span‐Depth Ratio,” Forest Products Laboratory Report, No. 1910, Madison, Wisc., 1952.
3.
Bohannan, B., “Effect of Size on Bending Strength of Wood Members,” Forest Products Laboratory Paper, FPL 56, Madison, Wisc., 1966.
4.
Brochard, F. X., “Elasticité (Elasticity),” Bois et Charpente en Bois, Edition Eyrolles, Paris, France, 1960, pp. 113–119.
5.
Comben, A. J., “The Effect of Depth on the Strength Properties of Timber Beams With An Analysis of the Stresses and Strains Developed,” Department of Science and Industrial Research, Forest Products Res. Sp. Rpt., No. 12, London, England, 1957.
6.
Coulomb, C. A., “Sur une Application des Régies de Maximis et Minimis á Quelques Problemes de Statique Relatifs á l'Architecture,” Memoires de l'Academic des Sciences, Paris, France, 1773.
7.
Freas, A. D., and Selbo, M. L., “Fabrication and Design of Glued Laminated Wood Structural Member,” U.S. Department of Agriculture Technical Bulletin, No. 1069, 1954.
8.
Kon, T., “On the Laws of Flexural Rupture of Wood,” Hokkaido University Report, Sapporo, Japan, Mar., 1949.
9.
Malhotra, S. K., and Bazant, I. M. M., “Ultimate Bending Strength Theory for Timber Beams,” Wood Science, Vol. 13, No. 1, Madison, Wisc., 1980, pp. 50–63.
10.
Moe, J., “The Mechanism of Failure of Wood in Bending,” Publication International Association for Bridge and Structural Engineering, Vol. 21, 1961, pp. 163–178.
11.
Navier, L. M. H., “Recherches sur la Flexion des Plan Elastiques,” Bulletin de la Societé Philo‐Mathématique, Paris, France, 1825.
12.
Navier, L. M. H., “Resumé des Leçons de la Résistance des Corps Solides (1819), Donné par B. Saint‐Venant,” De la Resistance de Corps Solides, Dunod, Paris, France, 1864.
13.
Newlin, J. A., and Trayer, G. W., “Form Factors of Beams Subjected to Transverse Loading Only,” National Advisory Committe for Aeronautics, Report 181, Forest Products Laboratory, Report No. 1310, 1941.
14.
Popov, E. P., “Shearing Stresses in Beams,” Introduction to Mechanics of Solids, Prentice‐Hall, Inc., Englewood Cliffs, N.J., 1968, pp. 219–251.
15.
Prager, V. W., “Uber die Querschnittsbemessung Zweigurtiger Holzholme,” Zeitschrift für Flugtechnik und Motorluftschiffort, No. 19, Germany, Oct., 1933.
16.
Ramos, A. N., “Stress‐Strain Distribution in Douglas‐Fir Beams within the Plastic Range,” Forest Products Laboratory Report, No. 2231, Madison, Wisc., 1961.
17.
Robinson, H., and Cooper, D. W., “The Ultimate Strength in Bending of Solid Beams of Structural Grade, European Redwood,” Wood Science, Vol. 1, No. 1, Madison, Wisc., 1958, pp. 40–65.
18.
Roš, M., “Das Holz als Bauschtoff,” Schweizerische Kongress Holzverwertung, Bern, Switzerland, 1936, p. 274.
19.
Saint‐Venant, A. J. C. B. de, “Leçons de Méhanigue Appligué,” Paris, France, 1937.
20.
Saint‐Venant, A. J. C. B. de, “Memoire sur La Flexion des Prismes,” Paris, France, 1855 and 1856.
21.
Suenson, E., “Die Lage de Nullinie in Gebogeńen Holzbalkan,” Holz als Rohund Werkstoff, Vol. 4, Germany, pp. 305–314.
22.
Thunell, B., “Uber die Elastizität Schwedischen Kiefernholz,” Holz als Rohund Werkstoff, Vol. 1, Germany, 1941, pp. 115–224.
23.
Vicat, L., “Annates des Ponts et Chausśes,” Paris, France, 1833, p. 200.
24.
Young, T., Philosophiae Transactions, London, England, 1814, p. 303.
25.
Yugoslav Specifications of Wood Structures, FTP 8, Savezno Ministarstvo Gradjevina, Sluzčbeni list FNRJ, Vol. 32, Apr. 1947, Reprinted by Gradjevinska knjiga, Beograd, 1965.
26.
Yugoslav Standards of Wood Testing—JUS.D.A1.048 Tension Parallel to Grain, JUS.D.A.1.045 Compression Parallel to Grain and JUS.D.A. Shearing Parallel to Grain, Savezna Komisija za Standardizaciju, Službeni list FNR Yugoslavia, Belgrad, Yugoslavia, No. 47, 1957.
27.
Zakić, B. D., “Inelastic Bending of Wood Beams,” Journal of the Structural Division, ASCE, Vol. 99, No. ST10, Proc. Paper 10071, Oct., 1973, pp. 2079–2095.
28.
Zhuravski, D. J., “Annates des Ponts et Chausseés,” No. 12, Paris, France, 1856, pp. 328.
Information & Authors
Information
Published In
Copyright
Copyright © 1983 ASCE.
History
Published online: Apr 1, 1983
Published in print: Apr 1983
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.