Reliability Based Optimum Design of Concrete Frames
Publication: Journal of Structural Engineering
Volume 109, Issue 3
Abstract
A reliability based optimum design procedure as a rational approach to optimum structural design is presented. The reliability analysis is based on a first‐order second moment approach. Uncertainties in the structural strength and loading due to inherent variability as well as modeling and prediction errors are included in the formulation. The failure modes considered include failure due to bending, combined axial thrust and bending, and shear. The structural systems investigated are typical office buildings consisting of fourand ten‐story reinforced concrete frames. The procedure to obtain the optimal structure is based on a minimization of the total expected cost, and the optimal risk level is obtained as the value that results in the minimum total expected cost. The total expected cost is taken as the sum of the initial building cost and the loss due to failure. An iterative procedure is used to obtain member dimensions and reinforcing steel areas for prescribed risk levels ranging from and upper, and lower bounds on the total expected cost are computed. For the buildings considered, the optimal risk level ranges from The proposed optimization procedure can provide an accurate estimate of the optimal level of safety.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
“Accident Facts,” The National Safety Council, Chicago, Ill., 1975.
2.
American National Standard Building Code Requirements for Minimum Design Loads in Buildings and Other Structures, American National Standards Institute, ANSI A58.1‐1972, New York, N.Y., 1972.
3.
Ang, A. H‐S., and Amin, M., “Reliability of Structures and Structural Systems,” Journal of the Engineering Mechanics Division, ASCE, Vol. 94, No. EM2, Apr., 1968.
4.
Building Code Requirements for Reinforced Concrete (ACI318‐77), American Concrete, 1979.
5.
Building Cost File, American Concrete McKee‐Berger‐Mansueto Inc., Central Edition, Van Nostrand Reinhold, New York, N.Y., 1979.
6.
Campey, I. K., “Types of Cover,” The Building Economist, Vol. 17, June, 1978, pp. 11–13.
7.
Cornell, C. A., “Bounds on the Reliability of Structural Systems,” Journal of the Structural Division, ASCE, Vol. 93, No. ST1, Feb., 1967, pp. 171–220.
8.
Cornell, C. A., “A Probability‐Based Structural Code,” ACI Journal, Dec., 1969, pp. 974–985.
9.
Edgerton, W. H., and Hlibok, A. J., Real Estate Valuation Cost Files, Van Nostrand Reinhold, New York, N.Y., 1979.
10.
Ellingwood, B. R., “Reliability Based Criteria for Reinforced Concrete Design,” Journal of the Structural Division, ASCE, Vol. 105, No. ST4, Apr., 1979, pp. 713–737.
11.
Ellingwood, B. R., Reliability Basis of Load and Resistance Factors for Reinforced Concrete Design, NBS Building Science Series 110, Feb., 1978.
12.
Ellingwood, B. R., “Statistical Analysis of RC Beam‐Column Interaction,” Journal of the Structural Division, ASCE, Vol. 103, No. ST7, July, 1977, pp. 1377–1388.
13.
Ellingwood, B. R., and Ang, A. H‐S., A Probabilistic Study of Safety Criteria for Design, Structural Research Series No. 387, University of Illinois, Urbana, Ill., June, 1972.
14.
Ellingwood, B. R., and Ang, A. H‐S., “Risk Based Evaluation of Design Criteria,” Journal of the Structural Division, ASCE, Vol. 100, No. ST9, Sept., 1974, pp. 1771–1788.
15.
Ellingwood, B. R., and Culver, C., “Analysis of Live Loads in Office Buildings,” Journal of the Structural Division, ASCE, Vol. 100, No. ST8, Aug., 1977, pp. 1551–1559.
16.
Greene, M. R., Risk and Insurance, Southwestern Publishing, Cincinnati, Ohio 1973.
17.
Hilton, H. H., and Feigen, M., “Minimum Weight Analysis Based on Structural Reliability,” Journal of the Aerospace Sciences, Vol. 27, No. 9, pp. 641–652, Sept., 1960.
18.
Lind, N. C., “Consistent Partial Safety Factors,” Journal of the Structural Division, ASCE, Vol. 97, No. ST6, June, 1971, pp. 1651–1669.
19.
Mortimer, T. J., “Insurance: A New Look at an Old Subject,” The Building Economist, Dec., 1979.
20.
Moses, F., “Design for Reliability—Concepts and Applications,” Chapter 13, Optimum Structural Design, R. H. Gallagher, ed., and O. C. Zienkiewicz, eds., John Wiley and Sons, Inc., 1973.
21.
Moses, F., and Kinser, D. E., “Optimum Structural Design with Failure Probability Constraints,” AIAA Journal, Vol. 5, No. 6, June, 1967.
22.
Moses, F., Stevenson, J. D., “Reliability‐Based Structural Design,” Journal of the Structural Division, ASCE, Vol. 96, No. ST2, Feb., 1970, pp. 221–244.
23.
Pauls, J. L., “Management and Movement of Building Occupants in Emergencies,” Proceedings of the Second Conference Designing to Survive Severe Hazards, IIT Research Institute, Nov., 1977, pp. 103–130.
24.
Portillo, M. G., Ang, A. H‐S., Evaluation of Safety of Reinforced Concrete Buildings to Earthquakes, Structural Research Series No. 433, University of Illinois, Urbana, Ill., Oct., 1976.
25.
Ravindra, M. K., Cornell, C. A., and Galambos, T. V., “Wind and Snow Load Factors for Use in LRFD,” Journal of the Structural Division, ASCE, Vol. 104, No. ST9, Sept., 1978, pp. 1443–1458.
26.
Reese, R. C., CRSI Design Handbook, Concrete Reinforcing Steel Institute, Chicago, Ill., 1978.
27.
Rojiani, K. B., and Bailey, G. L., “A Comparison of Reliability Based Optimum Designs and AISC Code Based Designs,” Proceedings, International Symposium on Optimum Structural Design, Tucson, Ariz., Oct., 1981.
28.
Roos, N. R., and Gerber, J. S., Governmental Risk Management Manual, Risk Management Publishing, Tucson, Arizona, 1976.
29.
Rosenblueth, E., Mendoza, E., “Reliability Optimization in Isostatic Structures,” Journal of the Engineering Mechanics Division, ASCE, Vol. 97, No. EM6, Dec., 1971, pp. 1625–1640.
30.
Switzky, H., “Minimum Weight Design with Structural Reliability,” Proceedings, Fifth Annual Structures and Materials Conference, American Institute of Aeronautics and Astronautics, Palm Springs, California, Apr., 1964.
31.
Turkstra, C. J., “Choice of Failure Probabilities,” Journal of the Structural Division, ASCE, Vol. 93, No. ST6, Dec., 1967, pp. 189–200.
32.
Wiggens, J. H., “National Losses and Mitigation Effects for Air, Earth and Waterborne Natural Hazards,” Proceedings, Conference on Designing to Survive Severe Hazards, IIT Research Institute, Chicago, Ill., Nov., 1977.
33.
Winter, G., Nilson, A. H., Design of Concrete Structures, McGraw‐Hill Book Co., Inc., New York, N.Y., 1979.
Information & Authors
Information
Published In
Copyright
Copyright © 1983 ASCE.
History
Published online: Mar 1, 1983
Published in print: Mar 1983
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.