Cluster Frequencies of Continuous Uniform Plates
Publication: Journal of Structural Engineering
Volume 109, Issue 12
Abstract
The numerical formulas are presented for quick determination of natural frequencies of orthotropic and isotropic continuous uniform plates. A one‐way continuous plate consists of two types of independent vibration modes in both directions. The transverse mode represents the number of half‐waves across the width of a plate. The longitudinal mode possesses more implicit characteristics, nevertheless it may represent shape distribution across all the panels. It has been noted that the frequencies of continuous uniform plates can be grouped in formation of clusters. The frequency clusters analyzed in this paper are based on the transverse modes. Therefore, each cluster consists of the number of longitudinal frequencies equal to the number of panels or spans in a continuous system. An example of twelve‐span continuous plate and 164 natural frequencies is included. Over sixty percent of the frequencies has error percentage less than 0.01. The maximum error is only 0.044%.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Dill, E. H., and Pister, K. S., “Vibration of Rectangular Plates and Plate Systems,” Proceedings of the Third U.S. National Congress of Applied Mechanics, 1958.
2.
Elishakoff, I., and Steinberg, A., “Eigenfrequendes of Continuous Plates with Arbitrary Number of Equal Spans,” Journal of Applied Mechanics, Vol. 46, No. 3, 1979.
3.
Hayashi, Y., and Kawai, T., “On Vibrations of Continuous Plate,” 15th Structures, Structural Dynamics, and Material Conference, 25–28, 1978 (in Japanese).
4.
Kurata, M. “On Vibration of Continuous Rectangular Plates,” Proceedings of the First Japan National Congress for Applied Mechanics, 1951.
5.
Qin, B. S., “Calculation of Continuous Plates and Study on Their Properties Under the Harmonic Disturbing Force,” thesis presented to Tonji University, China, in 1965, in partial fulfillment of the requirements for graduate degree.
6.
Gin, B. S., and Feng, C. C., “Frequencies of Continuous Plates by Moment‐Ratio Method,” Journal of Structural Engineering, ASCE, Vol. 109, No. 12, Dec., 1983, pp. 2905–2921.
7.
Sakata, T., “Eigenvalues of Orthotropic Continuous Plates with Two Opposite Sides Simply Supported,” Journal of Sound & Vibration, Vol. 47, No. 4, 1976.
8.
Sen Gupta, G., “Natural Flexural Waves and the Normal Modes of Periodically‐Supported Beams and Plates,” Journal of Sounds & Vibration, Vol. 13, No. 1, 1970.
9.
Veletsos, A. S., and Newmark, N. M., “Determination of Natural Frequencies of Continuous Plates and Hinged Along Two Opposite Edges,” Journal of Applied Mechanics, Vol. 23, 1956.
10.
Wu, C. I., and Chung, Y. K., “Frequency Analysis of Rectangular Plates Continuous in One or Two Directions,” Journal of Engineering & Structural Dynamics, Vol. 3, No. 3, 1974.
Information & Authors
Information
Published In
Copyright
Copyright © 1983 ASCE.
History
Published online: Dec 1, 1983
Published in print: Dec 1983
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.