Double Chord RHS Trusses: Analytical Model
Publication: Journal of Structural Engineering
Volume 109, Issue 12
Abstract
An analytical method is proposed and a computer program developed to analyze double chord trusses comprised of rectangular hollow sections. Three types of local yield mechanisms are incorporated: (1) Plastic hinge formation; (2) member yielding due to plastic load limit; and (3) yielding of shear springs that model the connections. The analysis is carried out in an incremental manner. Overall failure of a truss is declared when either an overall mechanism forms or excessive deflection occurs. A bilinear axial force‐moment interaction diagram is used to allow for reduction in the plastic moment capacity due to the presence of axial force. Results from analyses of Warren trusses with three different types of connections are presented and compared with those obtained experimentally from a previous study. Overall, very good agreement is observed thus verifying the validity of the analytical model.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Chidiac, M. A., “K‐Joints of Double Chord Square Hollow Sections,” thesis presented to McMaster University, Canada, in 1979, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
2.
“Commentary on Plastic Design in Steel,” ASCE‐WRC Joint Committee, ASCE Manual No. 41, 1961.
3.
Casgoly, P. F., and Bakht, B., “A Computer Program to Determine the Collapse Load of Steel Trusses,” Ministry of Transportation and Communications, Ontario, 1978.
4.
Faravelli, L., and Zanon, P., “Limit Analysis of Steel Structures Allowing for Shear Force,” Journal of Structural Mechanics, Vol. 9, No. 3, 1981, pp. 325–337.
5.
Franchi, A., Grierson, D. E., and Cohn, M. Z., “A Computer System for the Elastic‐Plastic Analysis of Large‐Scale Structures,” Journal of Structural Mechanics, Vol. 9, No. 3, 1981, pp. 295–324.
6.
Galambos, T. V., and Lay, M. G., “Studies of the Ductility of Steel Members,” Proceedings, ASCE, Vol. 91, ST4, Aug., 1965, pp. 125–151.
7.
Gere, J. M., and Weaver, W., Analysis of Framed Structures, D. Van Nostrand Company, New York, N.Y., 1965.
8.
Jennings, A., and Majid, K., “An Elastic‐Plastic Analysis by Computer for Framed Structures Loaded Up to Collapse,” Structural Engineer, Vol. 43, No. 12, Dec., 1965, pp. 407–412.
9.
Korol, R. M., “An Investigation of the Behavior of HSS Double Chord Trusses and Implications for Design,” Canadian Structural Engineering Conference, Vancouver, 1982.
10.
Korol, R. M., and Chidiac, M. A., “K‐Joints of Double‐Chord Square Hollow Sections,” Canadian Journal of Civil Engineering, Vol. 7, No. 3, 1980, pp. 523–539.
11.
Korol, R. M., Chiu, E. T. C., and Mirza, F. A., “An Experimental Investigation of Double Chord HSS Trusses,” Canadian Journal of Civil Engineering, June, 1982.
12.
Korol, R. M., Mirza, F. A., and Chiu, E. T. C., “An Investigation into the Behaviour of Double Chord HSS Trusses,” Final Report CIDECT 5V2 and CSCC Project 763, McMaster University, Hamilton, Canada, Mar., 1982.
13.
Mirza, F. A., Shehata, A. A., and Korol, R. M., “Modelling of Double Chord Rectangular Hollow Section T‐Joints by Finite Element Method,” Computers and Structures, Vol. 15, No. 2, 1982, pp. 123–129.
14.
Nadai, A., Theory of Flow and Fractures of Solids, McGraw‐Hill Book Co., New York, N.Y., 1950.
15.
“Specification for the Design, Fabrication and Erection of Structural Steel for Buildings,” American Institute of Steel Construction, New York, N.Y., 1978.
16.
Tall, L., ed., Structural Steel Design, 2nd ed., Ronald Press Co., New York, N.Y., 1974, p. 189.
Information & Authors
Information
Published In
Journal of Structural Engineering
Volume 109 • Issue 12 • December 1983
Pages: 2812 - 2828
Copyright
Copyright © 1983 ASCE.
History
Published online: Dec 1, 1983
Published in print: Dec 1983
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.