Inelastic Tangential Stiffness for 2‐D Frames
Publication: Journal of Structural Engineering
Volume 109, Issue 11
Abstract
A general instantaneous or tangential stiffness matrix for a plane frame member is presented. Expressions in the form of integral equations are developed for members having axial forces and arbitrary material properties, distributed loads and moment‐axial force‐curvature relations. The expressions are used for w sections of elasto‐plastic material and several examples of plane frames are loaded to failure. Experimental results reported in the literature for plane frames tested to inelastic failure are closely matched by the analytical technique.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Alvarez, R. J., and Birnstiel, C., “Inelastic Analysis of Multistory Multibay Frames,” Journal of the Structural Division, ASCE, Vol. 95, No. ST11, Proc. Paper 6922, Nov., 1969.
2.
Baker, J. F., Horne, M. R., and Heyman, J., “Plastic Behavior and Design,” Steel Skeleton, Vol. 2, Cambridge Press, N.Y., 1956.
3.
Harung, H. S., and Miller, M. A., “General Failure Analysis of Skeletal Plane Frames,” Journal of the Structural Division, ASCE, Vol. 99, No. ST6, Proc. Paper 9776, June, 1973.
4.
Hauck, G. F., and Lee, S. L., “Stability of Elasto‐Plastic Wide‐Flange Columns,” Journal of the Structural Division, ASCE, Vol. 89, No. ST6, Proc. Paper 3738, Dec., 1963.
5.
Kam, T. Y., “Reliability of Framed Structures Subject to Nonlinear Behavior,” thesis presented to Northwestern University, at Evanston, Ill., in 1982, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
6.
Korn, A., “Effect of Bowing on Rectangular Plane Frames,” Journal of the Structural Division, ASCE, Vol. 107, No. ST3, Mar., 1981.
7.
Lu, L. W., “Stability of Frames under Primary Bending Moments,” Journal of the Structural Division, ASCE, Vol. 89, No. ST3, June, 1963.
8.
Moses, F., “Inelastic Frame Buckling,” Journal of the Structural Division, ASCE, Vol. 90, No. ST6, Proc. Paper 4169, Dec., 1964.
9.
Ojalvo, M., and Lu, L. W., “Analysis of Frames Loaded into the Plastic Range,” Journal of the Engineering Mechanics Division, ASCE, Vol. 87, No. EM4, Proc. Paper 2884, Aug., 1961.
10.
Rossow, E. C., Barney, G. B., and Lee, S. L., “Eccentrically Loaded Steel Columns with Initial Curvature,” Journal of the Structural Division, ASCE, Vol. 93, No. ST2, Proc. Paper 5204, Apr., 1967.
11.
Schilling, C. G., Schutz, F. W., and Beedle, L. S., “Behavior of Welded Single‐Span Frames under Combined Loading, Welding Journal of Research, Suppl. 35, 1956.
12.
Vijakkhana, C., Nishino, F., and Lee, S. L., “Inelastic Stability of Unbraced Building Frames,” Journal of the Structural Division, ASCE, Vol. 100, No. ST3, Mar., 1974.
13.
Wood, R. H., “The Stability of Tall Buildings,” Proceedings, Institution of Civil Engineers, London, England, Vol. 11, 1958.
14.
Yura, J. A., and Galambos, T. V., “Strength of Single‐Story Steel Frames,” Journal of the Structural Division, ASCE, Vol. 91, No. ST5, Proc. Paper 4507, Oct., 1965.
15.
Zienkiewicz, O. C., The Finite Element Method, 3rd ed., McGraw‐Hill Book Co. Ltd., London, England, 1977, Chapter 18.
Information & Authors
Information
Published In
Copyright
Copyright © 1983 ASCE.
History
Published online: Nov 1, 1983
Published in print: Nov 1983
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.