Strength of Double‐Row Bolted‐Web Connections
Publication: Journal of Structural Engineering
Volume 109, Issue 1
Abstract
Full‐scale testing of double‐row bolted‐web connections was performed on coped and uncoped specimens. Parameters considered were the end and edge distance, bolt arrangement, and the type of hole (standard or slotted). All of the specimens failed in a block shear mode with factors of safety lower than predicted by the 1978 American Institute of Steel Construction (AISC) specification. An elastic finite element model was used to study the experimental behavior and develop a modified block shear failure model which shows good agreement with the test results. The finite element analysis also indicated the compression bending stresses at the cope to be twice that predicted by normal beam theory.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Birkemoe, P. C., and Gilmore, M. I., “Behavior of Bearing Critical Double Angle Beam Connections,” Engineering Journal, American Institute of Steel Construction, Vol. 15, No. 4, 1978, pp. 109–114.
2.
Fisher, J. W., and Struik, J. H., Guide to Design Criteria for Bolted and Riveted Joints, John Wiley and Sons, Inc., New York, N. Y., 1974.
3.
Manual of Steel Construction, 7th ed., American Institute of Steel Construction, New York, N.Y., 1970.
4.
Ricles, J. M., and Yura, J. A., “The Behavior and Analysis of Double‐Row Bolted Shear Web Connections,” Department of Civil Engineering, Phil M. Ferguson Structural Engineering Laboratory, The University of Texas at Austin, Thesis No. 80‐1, Sept., 1980.
5.
Specification for the Design, Fabrication, and Erection of Structural Steel for Buildings, American Institute of Steel Construction, New York, N.Y., 1978.
6.
Structural Steel Detailing, American Institute of Steel Construction, New York, N.Y., 1971.
7.
Wilson, E. L., Solid Sap: A Static Analysis Program for Three‐Dimensional Solid Structures, Structural Engineering Laboratory University of California, Berkeley, Calif., Sept., 1971
8.
Yura, J. A., Birkemoe, P. C., and Ricles, J. M., “Beam‐Web Shear Connections—An Experimental Study,” Journal of the Structural Division, ASCE, Vol. 108, No. ST2, Feb., 1982, pp. 311–326.
Information & Authors
Information
Published In
Copyright
Copyright © 1983 ASCE.
History
Published online: Jan 1, 1983
Published in print: Jan 1983
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.